A girl asking for help..pretty please

[singu]

I'm doing my protank/evod rebuilds and RDAs and i have to say i'm really liking it..
So, i will be ordering my first rba from fasttech and i need your help in deciding wich RBA to purchase. I've never used RBAs before and need something noob friendly and preferably smaller in size since some of the tanks are so huge i don't think they would look good on my MVP (thats what i'll be using).

I've looked at DID mini, Bliss and Kranken so far..so if you could help me out i would really appreciate it.

 

[ta2dave76]

I started with an igo-L as my first rba. Easy to build and use. Picked up a Trident clone the other day, just wrapped a killer dual flat ribbon coil. Not to sure what would work on an mvp though.

Good luck and let us know how it goes!

 

[Thunderball]

I really like the Tridents. Look good and have the adjustable air holes.

 

[minimalsaint]

If you want something with a tank, choices are pretty limited to what will look and feel balanced on a MVP.The mini DID would be a good fit.
I use rebuildable drippers for the most part on mine- mainly an IGO-L. it is nice and low-profile on the big honker MVP and they give a good vape.

 

[VaPreis]

My first rebuildable was an Igo-L. It is a dripping atomizer and not a rebuildable tank atomizer. It has a nice size deck to build on and experiment with various coils. I thought it was a great stepping stone for me to get into the genesis style tanks. The flavor and vapor from a nicely built micro coil on the Igo is hard to beat.

My personal experience is that the genesis style tank atomizers are very frustrating to set up on a regulated mod like your MVP, where the dripping atomizers were fairly easy. Most of the tank style rebuild-ables, you will be venturing into lower resistance levels that the MVP will not fire. Just my opinion of course, but a mechanical mod is almost a must have to set up the genesis tanks with the stainless steel mesh that's most commonly used as a wick.

 

[emus]

The FT cobra w/ thick tank produces high quality vapor. It is chrome plated brass though.

 

[singu]

I'm using an Igo L and YK1 from Fasttech and that's what got me into rebuildables...the only thing i don't like about them is having to drip all the time.

I did consider DID mini but it has some negative reviews on Fasttech so i'm staying away from that one, but cobra looks nice and with good reviews.

Thanks for all your suggestions guys

 

[Hectus]

The FT cobra w/ thick tank produces high quality vapor. It is chrome plated brass though.

Kinda pains me to say it since i own devices thats like 20 times as expensive, like a real DID, But the FT Cobra clone is one of the best devices i ever used.

 

[emus]

This one has thick tank and is my best performing RTA; and cheapest to boot.
It is nearly identical to the one w/ SS DT and cobra logo; both perform identical. Great flavor and warm vape. Good for pocket carry if happen to have jeans w/ coin pocket. The screw on cap doesn't pop off. Both are chrome plated brass. Be aware of other cobra model w/ thin tank. I use skinny cotton wick and pack wick into coil w/ drill bit. The skinny wick allows 30% VG to wick quick though skinny deck hole.

https://www.fasttech.com/p/1330501

 

[singu]

Yeah thats the one i was looking to order.
I saw the reviews on other cobras so i ruled the cobra out before you mention the fact that there is one with the thick tank. I will definetly order the cobra. Thanks emus

 

[emus]

Yeah thats the one i was looking to order.
I saw the reviews on other cobras so i ruled the cobra out before you mention the fact that there is one with the thick tank. I will definetly order the cobra. Thanks emus

Your welcome.
I'd prefer a SS/glass high quality version but this cobra is a good way to test the waters. I've was lucky and both of my cobras work great; luck comes in handy when buying ultra cheap clones.