hi all,
i am using Ego T 1000mah with Kanger T3 bottom coil clearomizer...I admit, this product (Kanger T3) is the best clearomizer i have tried so far....it produce good smoke, less TH, and easy for maintenance, since you can change the bottom coil if something happened with it....but lately i heard some people experiencing leaking and gurgling for their Kanger...as i can say, i have that problem also,...so after i diagnosed the coil part and do some tweak, i can say the problems coming from:
1. Silicon rubber at the center pole of bottom coil replacement
2. "The Flavor Wick" (wick on the top of coil) size and thickness
3. Depends on what e-liquids you use (50PG:50VG, 30PG:70VG, 100VG, etc.)
From my point of view, all problems can be solve....right? lol
Here are my advice for that:
problem no.1: you can be easily avoid this with not screw the bottom coil too hard...so the silicon rubber is not bend to much
problem no.2: you can re-build the bottom coil or if not, just add remove factory flavor wick, and replace it with 2mm silica wick, and place it back in...and you can see, it will fit perfect without gap...
problem no.3: because from what i see, this kanger designed for thicker liquids, you will had problems if you use thin liquids, so i just do some mix with my liquid to get right thickness (i mix 50% liqua (70PG:30VG) Apple and 50% Crave Gourmet Apple (VG))...and i got just right taste, lots of vapor, very low TH, and the most important,...no leak or gurgling at all..
if you guys has same problems with me,...can you add or gave another advice? since lots of people loved this product but problems made them cant vape this..........
Happy vaping
i am using Ego T 1000mah with Kanger T3 bottom coil clearomizer...I admit, this product (Kanger T3) is the best clearomizer i have tried so far....it produce good smoke, less TH, and easy for maintenance, since you can change the bottom coil if something happened with it....but lately i heard some people experiencing leaking and gurgling for their Kanger...as i can say, i have that problem also,...so after i diagnosed the coil part and do some tweak, i can say the problems coming from:
1. Silicon rubber at the center pole of bottom coil replacement
2. "The Flavor Wick" (wick on the top of coil) size and thickness
3. Depends on what e-liquids you use (50PG:50VG, 30PG:70VG, 100VG, etc.)
From my point of view, all problems can be solve....right? lol
Here are my advice for that:
problem no.1: you can be easily avoid this with not screw the bottom coil too hard...so the silicon rubber is not bend to much
problem no.2: you can re-build the bottom coil or if not, just add remove factory flavor wick, and replace it with 2mm silica wick, and place it back in...and you can see, it will fit perfect without gap...
problem no.3: because from what i see, this kanger designed for thicker liquids, you will had problems if you use thin liquids, so i just do some mix with my liquid to get right thickness (i mix 50% liqua (70PG:30VG) Apple and 50% Crave Gourmet Apple (VG))...and i got just right taste, lots of vapor, very low TH, and the most important,...no leak or gurgling at all..
if you guys has same problems with me,...can you add or gave another advice? since lots of people loved this product but problems made them cant vape this..........
Happy vaping
