Adding nic to 0mg juice???

[Cupcakesugars]

In theory, if I buy zero nic juice, but sometimes want low nic juice, I could just add nic base to it, right?

any thoughts/advice greatly appreciated. Thanks!

 

[Stosh]

If your zero juice is flavored, adding nic base will dilute the flavor somewhat, depends on how much zero juice and how much nic. Also be careful if using nic concentrate to be sure the results are the nic level you are expecting.
Figure the ratios and then double check your math....

 

[Wingsfan0310]

Yes you can do that but be aware you will dilute your flavor and change the PG/VG ratio. As an EX; If you added equal pats of 0mg juice with 12mg unflavored base, you would end up with 6mg juice but at half the flavor.

Cheers,
Steve

Edit Looks like Stosh types faster than me

 

[j3illy]

If I was gonna add nic to already flavored juice, I'd wanna add high strength nic base. Your best bet would be 100mg which wouldn't dilute the flavor too much at all I don't think. Adding 1mL to 9mL flavored juice would give 10mg strength, or for higher nic adding 2mL to 8mL would give you 20mg strength. You could get a small bottle of nic base from 1 of the sites like wizard labs or vapor shots for less than $10, but you're definitely gonna need to get a syringe too for measuring.

 

[Cupcakesugars]

Awesome, that's what I was thinking too, just wanted to check...consult the experts

 

[spaceballsrules]

As j3illy said, you want to use the highest nic you can to minimize flavor dilution. eJuiceMeUp has a great feature called Nic Combine that you can use to accurately measure how much nic to add to get a specific concentration. Just open the program and click on Tools -> Nic Combine. Then just enter the concentration of your nic and fiddle with the numbers until they get to the level you desire.