Adjustable Air Flow In A "Mini"?

[tctom]

I had originally posted this in the "Carto-tank" section - No wonder I didn't get any replies - OOPS!

Has anyone heard of such a thing or whether any of the manufacturers have plans for one? Personally - I think it would be a fantastic idea. It could look rather snazzy on a iTaste VV 3.0 or even a twist and with a sealed 510 connector - would eliminate some of the leakage issues. Any thoughts out there??

vape On Y'all - - vape On!!

 

[thatguy2]

maybe something like this?

Tank Air Flow Controller for 510 by SMOKtech [gv-SMOKtechTANKAirFlowController] - $3.45 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more

Tank Airflow Controller

 

[molimelight]

I'm guessing that you're talking about something like a Mini Pro Tank II? If that's the case, the link that thaguy2 provided won't work as it's for the full size tanks which are set up differently than the mini is. If you're not getting enough airflow in the mini you could drill out one or more of the three air holes in the base. They sell spares like below and you could drill out several to different sizes for use depending upon what juice you're using.

Kanger Mini ProTank 2 Replacement Base

 

[tctom]

molimelight - good idea but it doesn't address the "sealed 510" portion. I really like my Aerotank and I am hoping that Kanger comes out with an Aerotank Mini. I had been using their "Uni" tanks and liked them but nearly all of them will leak into the battery connector in short time. The Aerotank allows me to run two fill ups a day thru it with no gurgles from the bottom. Of course - I also run roughly two fills a day through my I30s tank (not a sealed 510 connector) and it never leaks. Maybe it's just something in the design of the coil for the Uni/Evod tanks.

And yes - thatguy2's suggestion is for full size tanks. I would rather get this unit (Kanger Air Flow Control Fits Protank 1 Protank 2 Protank 3 Aerotank Others | eBay) which would allow me to convert one of my Protank 3's into an Aerotank with the sealed 510 connector.

All very interesting. Thanks for the input.

 

[Rickajho]

They really can't do that with a PT/EVOD design because if you look at the coil itself, the hole in the positive post is the 510 connector. That's where air gets into the assembly, past the coil and up the mouthpiece. If you have a "sealed" 510 post on a PT the design stops working. Total vacuum lock.

 

[tctom]

Take a look at the Kanger Aerotank - where it screws into the battery - there is no thru hole. Air comes in from the side. The connection would be similar to a VV Nova mini tank and then to make it pretty one would need a ring like what comes with all the larger tanks. It could be done - I have used my Aerotank on a 650 Mah EVOD battery and it does work. Not a lot of vape from the wimpy battery - but it works. I haven't seen a battery connection on an eGo but there has to be a way. There is always a way!