Eyo! I've been vaping for a while but have always stuck with regulated boxes, suck as the segelei and snow wolf 200w but I'm venturing into mechs finally. Now, I've decided on my hardware. I'm going to get the noisy cricket by jaybo and run my velocity or velocity mini(clone). Not sure yet. Also Samsung 25r's. Here's my question finally... What could should I run? I've made some iffy claptons. Honestly wasn't impressed, but I'm tired of the simple macros and what not. If you have a prebuilt you like or a simple but effective build I could do please inform me..thanks!
- Status
$5.31 Authentic MKWS 316L Stainless Steel Heating Wire for RBA Atomizers - 26/32 AWG / 0.4mm/0.2mm dia. / 5m(15ft) at FastTech - Worldwide Free Shipping
I would stick with .4 ohms or higher for those battery's ............... Battery drain
If you like claptons, you can buy the wire pre-fab and wrap your coils with it.
Clapton Wire by Youde $6.99 5 Meter Roll - Wick & Wire - Accessories
Or check out videos on you tube. Rip Tripper has some fun/challenging builds. Just be careful with your resistance on a mech. And I'd suggest 30A batteries instead of those Sammys. With those, you need to keep it at or above .5 ohms to leave yourself a safety margin. In the Noisy Cricket with a fresh charge on your batteries, a .5 ohm build will pull almost 17 amps and push 140W. At .4 ohms, you hit 21A, so make VERY sure you check your builds with an ohm reader before you fire them on that mech.
Clapton Wire by Youde $6.99 5 Meter Roll - Wick & Wire - Accessories
Or check out videos on you tube. Rip Tripper has some fun/challenging builds. Just be careful with your resistance on a mech. And I'd suggest 30A batteries instead of those Sammys. With those, you need to keep it at or above .5 ohms to leave yourself a safety margin. In the Noisy Cricket with a fresh charge on your batteries, a .5 ohm build will pull almost 17 amps and push 140W. At .4 ohms, you hit 21A, so make VERY sure you check your builds with an ohm reader before you fire them on that mech.
Will do, and thanks. And to add another question. I had a cheap plastic ohm meter, but it broke soon after I got it. Know of any we'll build meters for the low low?
A DMM is a good investment. They are more accurate and last a lot longer. But I wouldn't recommend trying to build an ohm meter yourself.
Is there anything worth while that people don't want on the Cheap or Easy?
Check out UD for a Coil hub with a Variety of Coils. Drop in and Vape.
Plenty of Cheap ohm meters. - I suggest you Buy (2) or simply buy (1) better meter.
Check out UD for a Coil hub with a Variety of Coils. Drop in and Vape.
Plenty of Cheap ohm meters. - I suggest you Buy (2) or simply buy (1) better meter.
- Status
