Thanks for the 'link'. I have a couple w/ the Delrin ends and like them. You can cut them down and use higher ohm standard length carto's or buy XL non-dual carto's. Didn't know there was a Stainless model, that's a pretty good price for stainless.
ADVICE: Tank to go with a Provari
- Thread starter Kami
- Start date
- th_trl_thread_readers 0
- Status
Thanks for the 'link'. I have a couple w/ the Delrin ends and like them. You can cut them down and use higher ohm standard length carto's or buy XL non-dual carto's. Didn't know there was a Stainless model, that's a pretty good price for stainless.
I'm getting a Provari soon but use a KR808D-1 now. I'm getting a Chibi tank (cuz I can use it on my 808 now and use it on my Provari when I get it).
I'm about to order one of these....but I use 100% VG juice (Boba's Bounty) Do you think this will work ?
My favorite tank for my ProVari has been the Torpedo Tank w/SS caps. But, I've used several brands, and all have come apart when I didn't want them to. Now, I see GotVapes has a 5mL tank w/screw caps. BINGO! Looks like a winner to me. Got a couple on order, delayed due to holiday weekend. Should have them by Friday. I won't use any Carto/Tank less than 3.5mL's. And I haven't used a filler carto for near onto a year. Even those I'm filling more often than I care too. JMHO
Cheers,
otrpu
Cheers,
otrpu
I suppose I am the confused one. I am under the impression that a CE2 is a cart that has the dangling 2 wicks with a plastic outer tube. How could this go in an ACT v3? And how can it be punched?
I feel like a tard here, cause the only thing I can see punching is a boge or similar, with the filler type inside.
Thanks
Just punch a hole in the CE2, near the bottom like a Boge, so juice can get inside.
Yes, The CE2s are the ones with with wicks...
Thanks,
Lee
Yes, The CE2s are the ones with with wicks...
Thanks,
Lee
Lee. You are awesome. Sorry to bug ya, but could you possibly post a link to a site showing the specific CE2 you use in the ACT v3? I just can't grasp how a CE2 could work in the Arry Tank I have.
Big thanks.
I've used many different brand 5mL tanks. All have come apart when I didn't want them too. I've been saying for along time I needed screw plug tanks. I just ordered two from GotVapes. They claim a screw plug 5mL tank. Should have them by Friday. This may be the NEXT level for tanks. JMHO
Cheers,
otrpu
Cheers,
otrpu
I think y'all are yankin my chain on short stainless CE2 cartos to be in regular Boge size tanks like the ACT v3. LOL.
I have searched and searched and they don't seem to exist, although I haven't checked China.
Can someone post a valid link, or admit to the ruse? Ha ha ha
Have a good day y'all.
I have searched and searched and they don't seem to exist, although I haven't checked China.
Can someone post a valid link, or admit to the ruse? Ha ha ha
Have a good day y'all.
Well I received my Provari yesterday and along with it 3 tanks from 2 different suppliers. Holy cow
.when that Provari came out of the box I thought it was a marital aid
.but I digress
My first impression peeking at the tanks was the size of the pre-punched cartomizer . WOW that's like a micro meteorite hole. Really tiny.......but I did not tinker, just continued with the assembly as shipped
I fumbled about for a bit, charged the batteries, inspected the tanks, and filled two, one each from the two different suppliers. I also filled a Boge cartomizer that came with the Provari starter kit.
A word about the juice . I ordered the juice from a vendor a few weeks back who sold me my eGo-T. They recommend a pg75/vg25 for the eGo so that is what I ordered . Hence that is what is going into these tanks. Both tanks filled from the same bottle .chocolate fudge brownie if that matters?
I filled all tanks and cartomizers using an 18 gauge needle .
I played around with drip tips .seeking the best look LOL .I know being vain with my new toy with just a Labrador retriever looking on ..silly ..BUT then a drip tip became stuck in the tanks top grrrrrrrrrrrrrrrrr Have I mentioned I dislike tools? So now I must find a tool and use it as a punch to get that drip tip out of the tanks top before I can try this tank on my new sexy PV ..not a happy rancher.
The Provari comes with the voltage set at 4 so why mess with it .. Screwed on a tank and .. uh . Huh?...... tastes bad . As if I lit the wrong end of a cigarette ..YUCK! .. ok Im new its new.. its operator error so stuff Ive read here begins bouncing around in my head .. prime the cartridge atomizer thingy lower voltage punch holes invert the device call a shaman .. punt ..etc ..the Boge cartomizer worked perfectly although I dislike the frequent dripping .so my mission is to sort out the tanks.
I start with what I thought was priming the atomizer cartridge .. needle of juice down into the material surrounding the coil hmmmm wont draw ..well duh dummy the airway is full of juice so I unscrew the tank to blow out the juice and find juice all over the top of the Provari clean up my mess .blow out the airway . ..hey much better well for a few draws then back to yuck hmmmm lower voltage .nope .. raise the voltage ..nope .ok lets try a different vendors tank .. pop it on and . nadda ..operator error comes to mind ..but nadda no vaper not even a sizzle sound .hmmmm . So I check the ohms Provari says ohms are Op sexy little device this is telling me the circuit is open .so I have a DOA atomizer grrrrrrrr ..ok back to the nasty tasting tank cause it did work for a few draws and Im going to the next step ..punch a larger hole in it .. oh dear Im gonna need tools ..grrrrrrrrr .. empty the tank pull out the atomizer clean everything up . .take it to the shop ..look for a sharp pointy doo-dad .(if this does not work maybe I can slit my wrist with this puppy) . toss the cartridge atomizer thingy on the table and punch two holes in it ..enlarging micro meteorite hole and a new one ..return to the house .fill the tank and WOW as I am filling the tank I can visibly see the fiber material inside turning colour .wooohooooo I think I did something right ..The tank functioned as I hoped .good draw good vapour ..good taste .OUTSTANDING!!!
This morning I tried the Provari again and either a vapour fairy or a vapour angel touched it during the night or it had broken in some??? Wicked more juice???..........whatever the vapour was really good with my morning coffee.
So to add to my tank collection I purchased a cartomizer punch this morning .LOL .I bought a TOOL .i thought buying pre-punched cartomizers was the way to go for me but then you do not really know what size the pre-punched hole is gonna be, so turns out for my use it is not.
The tank with the DOA cartomizer was resolved by the vendor shipped a new one this morning and I am pleased with tank performance. What a nice vapour experience the Provari/tank setup is.
My first impression peeking at the tanks was the size of the pre-punched cartomizer . WOW that's like a micro meteorite hole. Really tiny.......but I did not tinker, just continued with the assembly as shipped
I fumbled about for a bit, charged the batteries, inspected the tanks, and filled two, one each from the two different suppliers. I also filled a Boge cartomizer that came with the Provari starter kit.
A word about the juice . I ordered the juice from a vendor a few weeks back who sold me my eGo-T. They recommend a pg75/vg25 for the eGo so that is what I ordered . Hence that is what is going into these tanks. Both tanks filled from the same bottle .chocolate fudge brownie if that matters?
I filled all tanks and cartomizers using an 18 gauge needle .
I played around with drip tips .seeking the best look LOL .I know being vain with my new toy with just a Labrador retriever looking on ..silly ..BUT then a drip tip became stuck in the tanks top grrrrrrrrrrrrrrrrr Have I mentioned I dislike tools? So now I must find a tool and use it as a punch to get that drip tip out of the tanks top before I can try this tank on my new sexy PV ..not a happy rancher.
The Provari comes with the voltage set at 4 so why mess with it .. Screwed on a tank and .. uh . Huh?...... tastes bad . As if I lit the wrong end of a cigarette ..YUCK! .. ok Im new its new.. its operator error so stuff Ive read here begins bouncing around in my head .. prime the cartridge atomizer thingy lower voltage punch holes invert the device call a shaman .. punt ..etc ..the Boge cartomizer worked perfectly although I dislike the frequent dripping .so my mission is to sort out the tanks.
I start with what I thought was priming the atomizer cartridge .. needle of juice down into the material surrounding the coil hmmmm wont draw ..well duh dummy the airway is full of juice so I unscrew the tank to blow out the juice and find juice all over the top of the Provari clean up my mess .blow out the airway . ..hey much better well for a few draws then back to yuck hmmmm lower voltage .nope .. raise the voltage ..nope .ok lets try a different vendors tank .. pop it on and . nadda ..operator error comes to mind ..but nadda no vaper not even a sizzle sound .hmmmm . So I check the ohms Provari says ohms are Op sexy little device this is telling me the circuit is open .so I have a DOA atomizer grrrrrrrr ..ok back to the nasty tasting tank cause it did work for a few draws and Im going to the next step ..punch a larger hole in it .. oh dear Im gonna need tools ..grrrrrrrrr .. empty the tank pull out the atomizer clean everything up . .take it to the shop ..look for a sharp pointy doo-dad .(if this does not work maybe I can slit my wrist with this puppy) . toss the cartridge atomizer thingy on the table and punch two holes in it ..enlarging micro meteorite hole and a new one ..return to the house .fill the tank and WOW as I am filling the tank I can visibly see the fiber material inside turning colour .wooohooooo I think I did something right ..The tank functioned as I hoped .good draw good vapour ..good taste .OUTSTANDING!!!
This morning I tried the Provari again and either a vapour fairy or a vapour angel touched it during the night or it had broken in some??? Wicked more juice???..........whatever the vapour was really good with my morning coffee.
So to add to my tank collection I purchased a cartomizer punch this morning .LOL .I bought a TOOL .i thought buying pre-punched cartomizers was the way to go for me but then you do not really know what size the pre-punched hole is gonna be, so turns out for my use it is not.
The tank with the DOA cartomizer was resolved by the vendor shipped a new one this morning and I am pleased with tank performance. What a nice vapour experience the Provari/tank setup is.
Does anyone have experience with this set-up on a provari or any pv and would you recommend? I haven't used a tank system before or the lr dc carto's; however, I have used the lr dc atties (1.5ohm) and didn't like how cut my battery time in half.
cheers,
In my experience, the hole on the smoketech tanks is too small for thick juices, and Boba's is the thickest juice I have.
The always awesome pbusardo says it with a megaphone.
The always awesome pbusardo says it with a megaphone.
That's pretty funny................but who does that to their tank?
- Status
Similar threads
