Am I the Only One who Prefers a Single Coil ?

[davevape55]

Ya, I like the goblin mini. Awesome flavor on the warm side. There's 3 set backs as I see it. The post screws((very tiny), the the tank fill screw(also very small, with restricted access to fill tank) and the airflow pendulum (cannot adjust when tank is tightened down on your device). But for the price it's not Bad. They could put a drilled hole on top with larger screw, and fill from there. But it's all good.

 

[Two_Bears]

Ya, I like the goblin mini. Awesome flavor on the warm side. There's 3 set backs as I see it. The post screws((very tiny), the the tank fill screw(also very small, with restricted access to fill tank) and the airflow pendulum (cannot adjust when tank is tightened down on your device). But for the price it's not Bad. They could put a drilled hole on top with larger screw, and fill from there. But it's all good.

Dave.

As I said in my review: I thought I was all done with tanks but I LOVE THE Goblin Mini. I would like to see them come out with an update that corrected the issues and keeping that awesome flavor. top fill would be an amazing improvement

Switching from screws to Allen screws would be great too.

Lastly having the ability to take the build out without the tank coming apart would be a terrific improvement.

 

[davevape55]

My ideal tank for right now is 3.5 mil. (capacity)
A single coil deck layout thats has a clean look to it(not to cluttered)
Posts with holes drilled and champered and grub screws to tighten legs.
Great airflow and large juice channels.
And a top fill hardened nylon cap & O ring (removable for filling).
This would be great for any single coil build you could ever dream up.
Thats what I would like to see. Right now. If it wasnt to expensive. $35.00 would be fine.

 

[skrymir]

I watched some reviews of the Goblin mini and didn't like the fill hole and screw. I just ordered a different single coil rta:

KS RTA clone

kanVape e-cigarette and vape gear

I'm going to put it on the IPV D2 for a high capacity stealth vape.

 

[Two_Bears]

I watched some reviews of the Goblin mini and didn't like the fill hole and screw. I just ordered a different single coil rta:

KS RTA clone

kanVape e-cigarette and vape gear

I'm going to put it on the IPV D2 for a high capacity stealth vape.

I will be the first to admit the Goblin Mini has issues.

1. The claustrophobic deck
2. The itsy bitsy screws.
3. Not being able to take your build out without spilling your juice
4. Having to have a tool and needle or unicorn bottle to fill the tank.
5. Leaking out the airflow if you do not get enough cotton in the juice wells.

I am NOT going to sweep those issues under the carpet and pretend they aren't there.

What I will say is that if you want a tank and the flavor of an atty in the same device thus is about the only device that will give you that.

FWIW: You should listen to multiple reviews and make your own decisions.

I was having a Freakshow Mini that was leaking like no tomorrow. I loved the flavor but was wasting my juice through the airflow.

I saw a review for the Wotofo Sapor and that started me thinking of an atty with top airflow.

I found the Rogue, Sapor, Aeolus, Orion v2, and a few other attys with top airflow. Almost every reviewer hated the Rogue. I found a rogue on eBay for 8.99 and thought I would take a chance. The Seller was in California. Buying an Orion v2 was around $110.

I knew I could trade it to another Vaper that wanted to try top airflow or just give the atty to a Vaper down on his other luck.

I get the Rogue in three days and the darn thing doesn't leak like a faucet and the flavor was every bit as good as the Freakshow Mini.

All of the reviewers hated the Rogue and it was the best atty I ever used

 

[Two_Bears]

Don't know how the heck two different messages got in the same post. Sorry folks

 

[Two_Bears]

My ideal tank for right now is 3.5 mil. (capacity)
A single coil deck layout thats has a clean look to it(not to cluttered)
Posts with holes drilled and champered and grub screws to tighten legs.
Great airflow and large juice channels.
And a top fill hardened nylon cap & O ring (removable for filling).
This would be great for any single coil build you could ever dream up.
Thats what I would like to see. Right now. If it wasnt to expensive. $35.00 would be fine.

All I would say Dave is you aren't far wrong.

I want a tank with awesome flavor, easy build deck, top fill holds 3 ml juice at a minimum, good airflow, and the ability to remove your build without spilling your juice, and needing no tools or special juice bottle to fill it

 

[mightymen]

Single coil has it's place with me.

I like my dual coil foggers have a few and I'm a chain vapor. When every I see that I'm using a lot of juice I make the switch to my single coil mini fogger helps me cut back.

 

[davevape55]

I posted a reply sometime ago. I thought I did. Anyway.. It
seems like everytime there's a new tank out. We tend to find issues. I think they should make one simple but efficient. Top fill tank, clean and easy deck to work with. Decent posts with great screw down anchoring of legs. Airflow that get it on, and juice channels that do there job in wicking. Were not building rockets or are we?

 

[davevape55]

I still waiting for a tank that will empty my savings.

 

[AndriaD]

I also like single coils.,and just started building a week ago. Have 3 kanger mini's and just built the goblin mini dual. Which for me was a little bit of a pain(screws are tiny). Looking for some good rta's with single coil decks. Are they going obsolete?

Never. Too many people prefer them -- what does seem to be slowly going obsolete are tight-draw atomizers -- but thankfully, I found out about the Achilles in this thread, tried one, and they have just about completely weaned me from tanks. Perfect tootle puff!

Andria

 

[AndriaD]

I'll check it out. I'm set on buying 2 of the new mini tanks next week. I don't have a Lemo so maybe one of those also. I'll check the KFL+... I heard the kayfun lite is decent. Its a matter of money for me. Thanks

Actually the "Kayfun Lite" kinda sucks, such little airflow that all you can get are burnt hits. The "Kayfun Lite Plus" on the other hand is EXCELLENT, adjustable airflow (that's the "plus"). But my Achilles has mostly put my KFL+'s into retirement.

Andria

 

[davevape55]

I'm enjoying the flavor of the goblin mini at 25.3watts dual coil 26ga 5-6wraps on 2.4mm. A simple kanthal build at. 33 ohms... First time for me over 20watts and able to vape it. So even though there is some short comings with this tank. I'm quite happy with the purchase. I just love this low profile look on the siegeli 75. I hope theres more low profile tanks coming up in the future. Could be a fad.

 

[93gc40]

I posted a reply sometime ago. I thought I did. Anyway.. It
seems like everytime there's a new tank out. We tend to find issues. I think they should make one simple but efficient. Top fill tank, clean and easy deck to work with. Decent posts with great screw down anchoring of legs. Airflow that get it on, and juice channels that do there job in wicking. Were not building rockets or are we?

Some people are picky and really love complaining about stuff. You ever heard of a product, any product ever invented that has a 100% approval rating and Zero issues? I never have.... Just Saying.

 

[davevape55]

Yes. Everyone has their own idea of what's important to have.

 

[davevape55]

I think what iI would like to see is a top filling tank thats affordable. Maybe there's one out there I haven't see. If so let me know. I may buy it.

 

[AndriaD]

I think what iI would like to see is a top filling tank thats affordable. Maybe there's one out there I haven't see. If so let me know. I may buy it.

if you didn't want huge whooshing airflow I'd suggest the Achilles RDA -- it holds 2.5ml so it's more like a tank than a dripper, but noner of that vacuum busy-ness to worry about, awesome TH, and NEVER EVER leaks. But it's a tootle puff; very tight airflow. Anyone that likes MtL would love it. Best yet, it's only $21.

Andria

 

[davevape55]

Myself.. I don't love to complain.But sharing info is just fine.

 

[davevape55]

Thankyou AndriaD.. I will look at this tonight.

 

[AndriaD]

Thankyou AndriaD.. I will look at this tonight.

I got mine at Achilles Atomizer Clone / Titanium RDA / Achilles RBA -- actually $21.95, so $22; I used the "domestic expedited shipping" option, about $6-something, and got it in about 2 wks -- from Hong Kong, so I thought that was pretty great.

Someone else said they drilled out the airflow a bit, but since the airflow is right under the coil, and it's a "stack", you're pretty much limited to that. But that tight airflow provides really saturated flavor and awesome TH; I lowered both my nic level and power level -- from 10mg/10w, to 9mg/8 or 9w. It builds just like a kayfun -- mounted higher, better TH; mounted lower, less TH.

Andria