Am i using my vape right? D:

[Peter Bailey]

Im using an Evic-Vtc mini with a smok TFV4 Mini tank with the TF-T3 coil it came with

I am unsure what setting i should be using the coil on, I assume it is a titanium coil so ideally a 75w setting with variable temperature depending on what i want?

I am not getting much vapour or flavour with settings ive used thus far and im slightly confused and just dont want to set it up wrong. In titanium mode ive locked the coil in and its reading at 0.36ohm

Is this correct?

It seems to be kicking me onto power mode when i try to fire up in TI and in power mode im only really seing a decent hit north of 50watts, the tank is also becoming hot? is that normal!? sorry for being so new.

 

[speedy_r6]

That is a kanthal coil. Just put it in power mode, start around 45w, and work your way up from there.

 

[BrotherBob]

Welcome and glad you joined.
Could try visiting your local B&M Vape shop and they might be able to advise or contact the seller/manufacturer.

I am not getting much vapour or flavour with settings ive used thus far and im slightly confused and just dont want to set it up wrong.

You may have a number of different issues here.

 

[suprtrkr]

+1. The TF-T3 coil is resistance wire and should be used only in power mode. The Temp Control coils for that are marked TF-Ti and TF-Ni. The T3 wants a lot of watts, and will drink some juice. Starting about 35 watts and working up is a good idea, but you're not going to see tons of vapor until you get up above 60 watts, most likely.

 

[Paul lamb]

75w is where I find that coil begins to come alive, the problem with only one battery and big coils you will go through batteries like no tomorrow

Unless you can get an enjoyable vape at lower power

 

[bassboy9909]

i have a TFV 4 and mine did nothing but flood at lower wattage read a bunch and found on Smok website that the tank really doesn't like anything lower than 80 watts or it will leak or flood and the tripple coil is a wattage coil not a TC coil