An Affordable RBA, turn key & safe for our mods
- Thread starter redeyedancer
- Start date
- th_trl_thread_readers 0
- Status
Hello Tim the o ring I sent with the atomizer goes under the atty it shouldn't leak . True my friend it is no chalice .
Last edited:
Nice collectionHere is a quick pick of the mods im vaping on at the moment.
Everything there is re-buildable.
3 REOs with 2 REOmizers and 1 Chalice.
3 Genesis attys or hybrid.
I think the leaks he gets like me are leaks from the air hole. If you get any juice from over sqounking the bottle and the RBA barely fits in the catch cup you get juice everywhere. It's just a Learning curve. I still do it. That was one advantage of a bottom feeder. Over dropping was a thing of the past because of the catch cup.
Nice collection Tim I don't have leakage with mine the gasket works perfectly and I don't get any out of the air hole either since it's further from the atty base then the ERA (which I do occasionally get juice out of the air hole)
Sent while Hyper Vapin a Trippy Tipped Reo
Sent while Hyper Vapin a Trippy Tipped Reo
Thanksgiving, football, and rebuildable REOs!
I'm a lucky boy!
God bless America brother
Sent while Hyper Vapin a Trippy Tipped Reo
Good morning Reonuts... HAPPY THANKSGIVING!!!
Vaping some Pumpkin Pie whilst awaiting the baking of the real thing later in the day, along with all the pre-dessert fare. Daughter, son-in-law and grandchildren are slaving away cooking while the patriarch is reclining on the couch watching football. (Apparently Dave and I think a lot alike.)
Could be a somewhat awkward dinner... a dance partner from last night invited herself to come up later today, (dinner time), and I somehow neglected to mention that another young lady was also going to be here.
It appears that by the end of the day I'm certainly going to be thankful for something... either emergency medical care or the fulfillment of a fantasy. AIN'T HOLIDAY GRAND!
The one thing that I have no doubt about is that you've all added a positive and refreshing quality to my life and I didn't even have to buy any of you a house and give you half my stuff. Who wouldn't be thankful for that.
Dan, I hope your wife is feeling much, much better. Eat most of the Pumpkin Pie while she's under the influence of her pain meds... you're never going to get another chance.
To our sick little Sashie, hope you're feeling better young lady. Sorry I gave you my germies.
Jack
Vaping some Pumpkin Pie whilst awaiting the baking of the real thing later in the day, along with all the pre-dessert fare. Daughter, son-in-law and grandchildren are slaving away cooking while the patriarch is reclining on the couch watching football. (Apparently Dave and I think a lot alike.)
Could be a somewhat awkward dinner... a dance partner from last night invited herself to come up later today, (dinner time), and I somehow neglected to mention that another young lady was also going to be here.
It appears that by the end of the day I'm certainly going to be thankful for something... either emergency medical care or the fulfillment of a fantasy. AIN'T HOLIDAY GRAND!
The one thing that I have no doubt about is that you've all added a positive and refreshing quality to my life and I didn't even have to buy any of you a house and give you half my stuff. Who wouldn't be thankful for that.
Dan, I hope your wife is feeling much, much better. Eat most of the Pumpkin Pie while she's under the influence of her pain meds... you're never going to get another chance.
To our sick little Sashie, hope you're feeling better young lady. Sorry I gave you my germies.
Jack
ya. 
She is fully medicined up and at home in her recliner. The prodigal son is home from college and daughter is picked up and home. Nothing missing but the stuffing. Good thanksgiving.
Glow Trippies at that, to match the glowy door and button on the Grand!
So glad to hear the missus is recovering, Dan!
Thank you I didn't know that ..... I had them installed on the threads for the cap. Oops
I don't need them now, but I can tell already I will in the future - will the o-rings be available for sale on their own?
Thank you I didn't know that ..... I had them installed on the threads for the cap. Oops
Lmao
Sent while Hyper Vapin a Trippy Tipped Reo
I mailed you your atomizers before I had the instructions printed. I should have mentioned it to you my fault .Thank you I didn't know that ..... I had them installed on the threads for the cap. Oops
Well, I am truly full on Thanksgiving dinner.......my 
on the Reomizer...
I love it...I have several rba's and was gonna give up because they were too tall and the vapor was cool...I like it warm...I found the Phoenix a couple weeks before the Reomizer came out... and immediately loved it...a dripping atty, but I loved the way it vaped...I usually only drip with a dca to protect my pv from leaks inside...but this is an exception ..and I love to drip at home on the couch when relaxing...and when I diy...Now, onto the Reomizer...I vaped it the way it came for a day...but noticed when fed, (squonked) the juice wasn't reaching the wick.... so I made a new wick and coil...I use plain cotton...as in cotton ball...because it works for me...I left a little "tail" on each side to hang where the juice came up when squonked...I did wet the whole wick when I first loaded it ...but after that, squonking does it every time...I am very HAPPY with Rob's creation..the vapor production is just crazy...I have to wave the vapor away to see to type this...
the flavor I get from my cotton wick is very clean and just that.. ..FLAVOR....no more, no less...I now have a new found love for rba's...I want to get one for all my Reo's..and slowly ..I will...lol...If you haven't invested in this yet ...please do, you won't be sorry...
just a couple things I want to add...I think the draw is airy, some don't...easy fix no worries...I did have a hard time unscrewing the screws...had to push really hard to get the screwdriver to connect enough to turn...shouldn't have a problem now as I didn't re- tighten to hard...and the little screwdriver is so cute! all rba's should come with them.........and last of all...my tired old eyes uses this item to do my coils/wicks...and I can do it pretty quick now...this is a godsend...Got mine at Harbor Freight for around 3-4 bucks...going to invest in one with a light...So, Thank you Rob..this is a great rba!!
....my on the Reomizer...I love it...I have several rba's and was gonna give up because they were too tall and the vapor was cool...I like it warm...I found the Phoenix a couple weeks before the Reomizer came out... and immediately loved it...a dripping atty, but I loved the way it vaped...I usually only drip with a dca to protect my pv from leaks inside...but this is an exception ..and I love to drip at home on the couch when relaxing...and when I diy...Now, onto the Reomizer...I vaped it the way it came for a day...but noticed when fed, (squonked) the juice wasn't reaching the wick.... so I made a new wick and coil...I use plain cotton...as in cotton ball...because it works for me...I left a little "tail" on each side to hang where the juice came up when squonked...I did wet the whole wick when I first loaded it ...but after that, squonking does it every time...I am very HAPPY with Rob's creation..the vapor production is just crazy...I have to wave the vapor away to see to type this...
the flavor I get from my cotton wick is very clean and just that.. ..FLAVOR....no more, no less...I now have a new found love for rba's...I want to get one for all my Reo's..and slowly ..I will...lol...If you haven't invested in this yet ...please do, you won't be sorry...just a couple things I want to add...I think the draw is airy, some don't...easy fix no worries...I did have a hard time unscrewing the screws...had to push really hard to get the screwdriver to connect enough to turn...shouldn't have a problem now as I didn't re- tighten to hard...and the little screwdriver is so cute! all rba's should come with them....
.....and last of all...my tired old eyes uses this item to do my coils/wicks...and I can do it pretty quick now...this is a godsend...Got mine at Harbor Freight for around 3-4 bucks...going to invest in one with a light...So, Thank you Rob..this is a great rba!!
I'm sorry that you're down on your luck. There is no way that you have enough equipment to feed your habit. Maybe we'll take up a collection so you can go buy another REO
Here is a quick pick of the mods im vaping on at the moment.
Everything there is re-buildable.
3 REOs with 2 REOmizers and 1 Chalice.
3 Genesis attys or hybrid.
- Status
Similar threads
