Any startup guide for rebuildables.

[DaxFX]

Hi guys what RBD would you recomend to, i have very poor vision and need reading glasses so i need something easy to work, remember also eill be mi first one,

Also there is a noob guide or a starting guide that can teach me more about what wick and what wires do i need?

Thanks
Dax


Sent from my iPad using Tapatalk HD

 

[Unforeseen]

Moved to Rebuildable Atomizer Systems

 

[super_X_drifter]

Here's one:

RM2 / rba 2.0 / Reomizer 2 Rebuild Tutorial
http://www.e-cigarette-forum.com/forum/showthread.php?t=413000

It's much easier than you probably think.
Good luck

 

[El_tecolote]

Here's one:

RM2 / rba 2.0 / Reomizer 2 Rebuild Tutorial
RM2 / RBA 2.0 / Reomizer 2 Rebuild Tutorial

It's much easier than you probably think.
Good luck

A very good step-by-step guide for newcomers to RBAs.

 

[d3mon]

It's much easier than you probably think.
Good luck

the issue, as i see it, is that most sites that sell rba's also have the standard warning:

Please note very carefully that rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

and this can REALLY make new comers to RBAs (such as myself) pretty leary of getting into it.

 

[d3mon]

the issue, as i see it, is that most sites that sell RBA's also have the standard warning:



and this can REALLY make new comers to RBAs (such as myself) pretty leary of getting into it.

of course...i'm from TX. so RBA building easily falls under the "hey y'all! watch THIS!" mentality we have here

 

[super_X_drifter]

the issue, as i see it, is that most sites that sell RBA's also have the standard warning:



and this can REALLY make new comers to RBAs (such as myself) pretty leary of getting into it.

Good point. I think they have to post something probably more to protect from a legal standpoint? Man, rebuilding couldn't be more simple or easy in my opinion. If you can refill a tank or fill a carto, you can rebuild a dripping or bottom fed RBA . I never used tank style attys. After you understand the basics, it's pretty much common sense and intuition that takes over .

If I can do it, anybody can

 

[zandersig]

What would the number 4 rule mean? Can that be a Joyetech 650mAh Twist battery?