Anyone here used fasttech.

[trouble1000]

Right, i reckon Ian's broadband has packed up again... we can start talking about him again now

Went down for 10 minutes, then I had to check my duty rosta for work for the rest of the week

Magnificent idea! I'd bought the double tiered stand as well as the single row :/ The single is not being used because I've tried to cut the section between 2 of the circles to make a holder for my rectangular mods like the MVPs and Gripper =] Of course I haven't the strength to cut through the plastic, so this short Thanksgiving break I'be be asking Tommy to deal with it for me =]

Now that you've mentioned the dowels, I've gotten the idea NOT to replace the current legs, but to add an additional leg at the center of the display 'shelf' where it sags AND to add some 'no slip' cabinet/shower stickers under each mod =] One of my issues is that my eGos slip and the suction cup eGo stands that I am using take up a bit more space than I like.

Tommy to the rescue I'll have to weigh it up, when mine arrives. If I do any mods, I'll post up some snaps Lisa. I wonder if you could get some rubber grommets - the sort that they use on car bodywork when wires have to pass through the panels. If you get the right size you can pop it into the stand hole and just cut out a section in the middle so the egos pass through. Hope that makes sense.

Another plus is returns, I ordered a fogger v2 and it came shattered. Nqa return, most vendors offer DOA returns but will make you pay return shipping, fast tech covered shipping.

Must admit, they are pretty good with returns. It's just the shipping times that suck

I have to write this quick cos my internet keeps crashing as well.

Cheers ian i will look through my toolbox tomorrow, my taifun shipped today

I might be able to find the stock code number if you need it Terry. The ones I have are just in a multi pack assorted sizes, but make sure it's 3/32" thickness, normal 1/16" washers aren't thick enough.

Ians isn`t the only one cody,

2 days mine has been playing up now, and it just did it again after i had wrote a long reply on here; went to post it bang gone again

I've had that happen too mate, right pain in the ....

 

[trouble1000]

I bet all your internet connections have been fine, as soon as cody is back then you are all off. Come on, admit it, its because i dont have baths isnt it?

Honestly (Mr Stinky), we do love you really

 

[trouble1000]

Anyway, I'm wearing a black armband at the moment. F1 has finished for this year, I've got to wait until Spring for it to start again

 

[Codz]

Anyway, I'm wearing a black armband at the moment. F1 has finished for this year, I've got to wait until Spring for it to start again

I do love F1 but i sincerely hope that we dont have to watch two dozen cars follow Herr Vettel around for 90mins every race next season!

 

[Codz]

Anyhow, im off for a shower, stick that in your e-pipes and vape it

 

[trouble1000]

I do love F1 but i sincerely hope that we dont have to watch two dozen cars follow Herr Vettel around for 90mins every race next season!

There will be some big changes next year mate. Turbo V6 engines, thinner front wing, restrictions on the rear wing adjustment. Simpler exhaust system and a revamped kers package. All designed to slow the cars down. A lot of changes to the aero package, should take away Red Bull's edge. I think there will be some surprises next year

 

[terry w]

I bet all your internet connections have been fine, as soon as cody is back then you are all off. Come on, admit it, its because i dont have baths isnt it?

No never cody, not at all mate; we would never do that to you

Went down for 10 minutes, then I had to check my duty rosta for work for the rest of the week



Tommy to the rescue I'll have to weigh it up, when mine arrives. If I do any mods, I'll post up some snaps Lisa. I wonder if you could get some rubber grommets - the sort that they use on car bodywork when wires have to pass through the panels. If you get the right size you can pop it into the stand hole and just cut out a section in the middle so the egos pass through. Hope that makes sense.



Must admit, they are pretty good with returns. It's just the shipping times that suck



I might be able to find the stock code number if you need it Terry. The ones I have are just in a multi pack assorted sizes, but make sure it's 3/32" thickness, normal 1/16" washers aren't thick enough.



I've had that happen too mate, right pain in the ....

Been working on the new bathroom all day Ian, so i will be going back and forth to b&q over the next couple of days. But just hang fire with the stock code mate, i might have sommat in my toolbox. will have a look tomorrow.

 

[trouble1000]

Anyhow, im off for a shower, stick that in your e-pipes and vape it

Right it's pick on Cody time now

 

[trouble1000]

No never cody, not at all mate; we would never do that to you



Been working on the new bathroom all day Ian, so i will be going back and forth to b&q over the next couple of days. But just hang fire with the stock code mate, i might have sommat in my toolbox. will have a look tomorrow.

No problem mate, if you need it give me a yell. My bathroom jobs are all finished for now, until the Missus decides she wants something else doing

 

[terry w]

No problem mate, if you need it give me a yell. My bathroom jobs are all finished for now, until the Missus decides she wants something else doing

LOL I KNOW WHERE YOU ARE COMING FROM MATE,

i JUST WISH THINGS WERE STRAIGHT FORWARD, BUT THEY NEVER ARE AFTER WE RIPPED THE OLD BATH AND BASIN OUT I NOTICED A LOT OF THE FLOORBOARDS WERE ROTTON, SO I HAD TO TEAR THEM UP AND REPLACE THEM WITH SOME TIMBER SHEETING I HAD LEFT OVER FROM WHEN I MADE MY LEAN TOO. WHAT A PITA.

 

[Codz]

Right it's pick on Cody time now

OY, i heard that

LOL I KNOW WHERE YOU ARE COMING FROM MATE,

i JUST WISH THINGS WERE STRAIGHT FORWARD, BUT THEY NEVER ARE AFTER WE RIPPED THE OLD BATH AND BASIN OUT I NOTICED A LOT OF THE FLOORBOARDS WERE ROTTON, SO I HAD TO TEAR THEM UP AND REPLACE THEM WITH SOME TIMBER SHEETING I HAD LEFT OVER FROM WHEN I MADE MY LEAN TOO. WHAT A PITA.

no need to shout terry!

 

[trouble1000]

LOL I KNOW WHERE YOU ARE COMING FROM MATE,

i JUST WISH THINGS WERE STRAIGHT FORWARD, BUT THEY NEVER ARE AFTER WE RIPPED THE OLD BATH AND BASIN OUT I NOTICED A LOT OF THE FLOORBOARDS WERE ROTTON, SO I HAD TO TEAR THEM UP AND REPLACE THEM WITH SOME TIMBER SHEETING I HAD LEFT OVER FROM WHEN I MADE MY LEAN TOO. WHAT A PITA.

I think I'll have the same problem when I come to change my suite. In the bathroom we've got an inspection board that goes the full width of the bathroom, it runs under the loo, the sink and the front of the bath. All the central heating pipes and water and waste pipes are underneath it. The only problem is, it's a thinner board than the rest of the flooring, so when you sit on the throne the back of the pan goes down a couple of mm. Or at least it did until I put a wedge underneath it. But who knows what's already leaked out with the previously movable pan, it's where the seal for the waste pipe is. No funny smells yet though

 

[trouble1000]

OY, i heard that



no need to shout terry!

That was a quick shower, hope you had a proper wash mate

 

[terry w]

OY, i heard that



no need to shout terry!

Sorry pongo, I mean cody. caps lock was on

 

[terry w]

I think I'll have the same problem when I come to change my suite. In the bathroom we've got an inspection board that goes the full width of the bathroom, it runs under the loo, the sink and the front of the bath. All the central heating pipes and water and waste pipes are underneath it. The only problem is, it's a thinner board than the rest of the flooring, so when you sit on the throne the back of the pan goes down a couple of mm. Or at least it did until I put a wedge underneath it. But who knows what's already leaked out with the previously movable pan, it's where the seal for the waste pipe is. No funny smells yet though

LOL, no smells = no worries mate.

 

[trouble1000]

Right I'm gonna clear off before "tinternet" drops again. Plus, I'm on an early tomorrow too.

See you all later

 

[lisancentraltx]

QUESTION: Why are they making NR-R-NR wires... what is the benefit?

http://www.e-cigarette-forum.com/fo...zer-systems/404921-nr-r-nr-wire-tutorial.html

 

[Codz]

That was a quick shower, hope you had a proper wash mate

Sorry pongo, I mean cody. caps lock was on

hey, i'll have you both know i use the finest lynx shower gel (if only they still sold hai karate! )

Right I'm gonna clear off before "tinternet" drops again. Plus, I'm on an early tomorrow too.

See you all later

Seeya mate.

 

[terry w]

Right I'm gonna clear off before "tinternet" drops again. Plus, I'm on an early tomorrow too.

See you all later

Night mate,

See ya tomoz.

 

[terry w]

hey, i'll have you both know i use the finest lynx shower gel (if only they still sold hai karate! )



Seeya mate.

LOL Hai karate,

Showing your age there mate, funny thing is i used to love it