Anyone tried the Expromizer?

[Blindtarm]

Hi, I kinda a newbe, been vaping for a while though.

My question: Anyone tried the Expromizer? Is it as good as it looks like? Best of all worlds and all that...

 

[Nuclear Cowboy]

Yes, I own one. It's a fantastic piece of equipment but has a few small flaws. I have never used a RTA that produces better flavor than the eXpromizer. It simply rocks in that department. Vapor production is good and the adjustable air intake are is a great idea. One of the best things about it is you can get to the coil without draining the juice! I consider it a step above the kayfun. If they weren't so expensive I would own a bunch of them.

The bad parts: The tank leaks at the botton seal. I have replaced the bottom O-ring with one from a Kayfun and it seems to have fixed the problem but out of the box mine leaked. The drip tip opening is milled too damn big. They give you bigger O-rings to fix this problem but it's a band-aid, they need to make that hole smaller! It's a 23mm device and may have some hang over with a 22mm mod. The center pin on the 510 connection is a "floating pin." The spring for this is in the lower section that adjusts the airflow. The pin isn't connected to the spring and the spring can and will fall out when serviceing the unit or changing the airflow control. I have been on the floor seaching for that spring more than a few times.

Last but not least they have no vender in the USA.

I would reccomend it.

 

[Blindtarm]

The leaking issue is really bad. The reason I can't use my kayfun outdoors is that I need to have "vaper towels" ready at all times using it.

Still considering, though. It's a lot of money. No vendors in USA doesn't matter to me, since I live in Norway and need to get it shipped anyways, since there are no vaping shops around. Thinking of getting it from eXvape.de.

 

[SethR]

Was definitely curious about the expromizer also good to know..

Sent from my SPH-L720 using Tapatalk

 

[p7willm]

They do have vendors in the US. I just bought one at a B&M store that has a web presence. Go to their web site, eXvape, and go to find more vendors. There are 3 in the US.

 

[nordoe]

Liberty Vapor has them in stock.

 

[Ronslows10]

Any chance of a clone for these in the near future? I wanted to pull the trigger but vape budget got in my way.

Sent from my LG-D802 using Tapatalk

 

[Dogeggs]

I got the 1.1 version and it hasn't leaked once, flavour is so good that i rarely use my dripper any more... one flaw i've found is that juice builds up in the hole the drip tip goes into, and after a while will end up in your mouth, a quick wipe with a paper towel every 30 mins or so puts paid to that though. Get one, they aren't a silly price.

 

[audiopro69]

Liberty Vapor has them in stock.

Yes they do!!! Got mine yesterday from them along with my new Hana DNA20 Mod clone

I own 2 real Russians and one real Kayfun and I gotta say this thing rocks
amazing flavor - Especially Liberty's new anniversary flavor Creme Libertee soooo good

The build quality is not quite that of a Russian, Taifun or Kayfun but the price is good.
Mine is the v1.1, we threw it together at the shop with a 1.4ohm coil and cotton and it was good
for a hour or so then it started to leak. Got home tore it down and rubbed some VG on the orings and volia
no more leaking. I did email Exvape about getting a set of the non clear orings for free and I am awaiting
the replacement spring for the floating pin when the shop gets them in.

A little polishing with some scotchbrite pad on the threads smoothed them out a bit

Get one you won't regret it

 

[VaPreis]

I have a v1.1 Expromizer that I bought directly from Exvape in Germany. Today I received the 510 pin fix from them. Originally, they said it was to be a new design heavier spring, but instead they sent an updated positive pin which is working great.

The more I use the Expromizer the more I'm falling in love with it. The vapor and flavor is outstanding, and perhaps the best out of any atomizer I own, including my kayfun clones, which I'm rather fond of.

I've mentioned previously that the build quality is not that great. The threading is really sub-par, especially in the chimney section of mine, but it's useable. It also arrived with many fine surface scratches on it, most of which polished out with some 0000 steel wool. It looks pretty nice at this point.

The quality of the vape is what redeems it, and my most favorite KFL clone is slowly taking a back seat to the Expromizer.

I've had no issues with it leaking with the exception of laying it on it's side when the liquid level is low. Seems to be prone to this because of the large air space it has in the tank by it's design. The only reason I know this is because I fell asleep with it in my lap and a small amount leaked out the air hole. I'm not in the habit of laying my mods on their side for extended periods of time, so it was only an issue the once. Kayfuns can be prone to the same type of leak on their sides with low liquid level.

 

[RSZ1]

Received the latest version a couple weeks ago directly from Germany. Took one week to Canada which is pretty good. I really like this thing and have no complaints. Machining on the threads isn't quite up to par of a genuine Kayfun or the like, but not bad either.

I got the extended version, which holds an incredible amount of juice. But its HUGE! With the extended version, you can use it in regular length with plastic tank section, and you can use the extra stainless steel portion to use it in all ss mode.