Anyone try the AnyVape Davide Mini Glassomizer???

[Garemlin]

Specifically the first version that uses the Kanger heads. Found a great deal and was thinking about picking them up since they are being discontinued in favor of the new version that uses Aspire BCD. These have 2ml capacity over the 1.5 of the Mini PT. And I can get them much cheaper.

Any issues with them????

 

[DavidOck]

Nice topper. Have one, and prefer it's size to the mini PT2. Good vape, no issues using evod/pt or even T3S heads.

And not sure about the newer ones, but the full size Glasso is simple to make backward compatible with Kanger coils. Just remove a couple parts. Done.

 

[Garemlin]

Thanks David. Yeah this is the early version that takes the Kanger PT heads. From what I have read they are a direct swap. What do you mean about removing parts???

I was about ready to pick up 2 Mini PT's, but I can get 3 of the AnyVape Davide's for less. And they hold more juice. Now that I am rebuilding Kanger coils I am golden.

 

[DavidOck]

My mini Davide is the original, so don't know if they've made changes to it for the Aspire DBC heads.

The newer version of the full size comes with the Aspire heads. But they go into another collar that threads onto the real base. Set that collar aside. Also, if you look up into it, (it's been a while, CRS strikes!) there's a little white (nylon?) part, take it out. With those two pieces gone, it's now PT/Evod or T3S coil compatible. Easier to do than to describe

So if you find a good deal on the Glasso and it's the Aspire version, easy to mod back.

I, too, like the convenience of only having to stock one type of coil. Other than my Kayfun, everything I use regularly uses the same. KISS. Don't have to worry about what goes in what, do I have spares for everything....

 

[Garemlin]

My mini Davide is the original, so don't know if they've made changes to it for the Aspire DBC heads.

The newer version of the full size comes with the Aspire heads. But they go into another collar that threads onto the real base. Set that collar aside. Also, if you look up into it, (it's been a while, CRS strikes!) there's a little white (nylon?) part, take it out. With those two pieces gone, it's now PT/Evod or T3S coil compatible. Easier to do than to describe

So if you find a good deal on the Glasso and it's the Aspire version, easy to mod back.

I, too, like the convenience of only having to stock one type of coil. Other than my Kayfun, everything I use regularly uses the same. KISS. Don't have to worry about what goes in what, do I have spares for everything....

These are the early version that do not use the Aspire heads. I'm trying to get away from the Aspire heads now that I am building coils for the PT heads. I can pick these Anyvapes for $9 a piece. Around $5 cheaper than a mini PT which hold less liquid. And if I can use the same heads win win.

So your originals use PT heads with no modification correct??? Just trying to clarify before ordering.

 

[DavidOck]

Yes, original mini Davide and full size take PT heads with no problems. It's just the new ones (typically labeled onsite as "Aspire DBC" that need to be modified, and then they're fine, too.

 

[tazzle]

As a note for those with the later Davide versions that use Aspire dual coils (like mine), I was just researching this today because I'd rather use my Kanger heads that I use for everything else, and these are the two parts that you need to remove from the newer Davide in order to use the Kanger heads:

 

[Garemlin]

Well I am I luck then. Because where I found them is trying to clear out the old version in favor of the new version for $3 cheaper. Guess I will stock up.

 

[DavidOck]

As a note for those with the later Davide versions that use Aspire dual coils (like mine), I was just researching this today because I'd rather use my Kanger heads that I use for everything else, and these are the two parts that you need to remove from the newer Davide in order to use the Kanger heads:

View attachment 328046

Yup, that's it! Just take those out, and you're ready for Kanger heads. Thanks for searching out the pics!

 

[Pocha]

I threw out all my clearos since I switched over to cartotanks...except for my mini Davide (yes, the original that uses the protank coils). It was the best of the bunch and I still use it occasionally. The only downside is that it is harder to fill due to the tiny filler holes. They're a nice little tank with a swappable drip tip.

 

[Garemlin]

I threw out all my clearos since I switched over to cartotanks...except for my mini Davide (yes, the original that uses the protank coils). It was the best of the bunch and I still use it occasionally. The only downside is that it is harder to fill due to the tiny filler holes. They're a nice little tank with a swappable drip tip.

Do they take a standard 510 drip tip???

Tap'd from my LG G2

 

[3mg Meniere]

Yes. I just checked. But if you use them for with juices that eat plastic, you have to be careful what driptip you use. I think they are prettier with the metal tip that comes with them.

 

[Pocha]

^^^
Yep, 510 friendly!

 

[Freedombadeaux]

Good to Know!! Thx!

 

[Freedombadeaux]

So glad I found the plastic unattractive from the get. I like glass, glass and glass! And course CHROME!!!