Are you done stocking up?

[JustWondering1]

Random coil update.

Unsure of how long I've been using this Breeze 2 coil but if I had to guess it's about a month and still works great. Had some dryish hits last night but it was just low on juice. vaping it all day at work today since my manager is out. I love this thing, it's really keeping me from chasing the pod deals you guys post.

My Vaporesso GT 0.5 that I have in my Tarot Baby is on it's way out after two weeks. Not bad, that's how long I was hoping they'd last. No month long coil like my Kanger OCCs or my TFV12 but that's ok, they can't all be the best. Was quite the enjoyable vape while it tasted good. I've vaped the tank down to about nothing and will switch back to my Pico with a Top Tank that's just been sitting full in my backpack for a couple weeks.

And my desk mod at home with the TFV12 still tastes great after a month with minimal leaking. Unsure of when I'll change this coil as it's been working so great.

Do you like the Breeze 2 pod better than the Breeze Pod?

 

[markfm]

Note on the ccell heads - they apparently clean well, basic soak and dry. I may try that when the present 0.3 ohm dies, for kicks.

 

[UncLeJunkLe]

@NolaMel

The problem with the Advken Dominator listing on VS is they first listed it without any option.

Then a few days after I first found out about it, they changed the listing so that you have to choose either RBA coil or OCC coil option.

So I'm guessing that tank comes with or without RBA. And now I see the only option is "OCC Coil" So if you order it, you may not receive the RBA, even though it says it comes with it in the description. Just a warning.

But if you decide to order it and you do get the RBA please let me know. I was on the fence about it so I never ordered it before the RBA option disappeared.

 

[NolaMel]

If you just need one, shoot me a pm. I bought four total. I can spare one.

Thank you! I was off hunting when you responded. I found (and ordered) the smok brand ones for @$15 in Florida. Hopefully those will work. If not, I’m sure I can PIF them to someone here. They only had a few in stock, so I I went ahead and got a couple

 

[markfm]

@NolaMel

The problem with the Advken Dominator listing on VS is they first listed it without any option.

Then a few days after I first found out about it, they changed the listing so that you have to choose either RBA coil or OCC coil option.

So I'm guessing that tank comes with or without RBA. And now I see the only option is "OCC Coil" So if you order it, you may not receive the RBA, even though it says it comes with it in the description. Just a warning.

But if you decide to order it and you do get the RBA please let me know. I was on the fence about it so I never ordered it before the RBA option disappeared.

The listing i bought against, still there today, says it comes with both the 0.16 ohm coil and the rba head. This would be consistent with what djlsb's review indicated.

"Advken Dominator Sub Ohm Tank comes with

1 * Dominator Sub-Ohm Tank

1 * 0.16ohm EC Coil

1 * RBA Head - Two-Post

..."

I'll know in a couple weeks [emoji3]

 

[bnrkwest]

The Dominator I got from Element includes the RBA. More expensive tho, I found the vapesource listing after I ordered from Element.

 

[bnrkwest]

Finished my coil project, that takes care of that forever LOL

 

[puffon]

Not bad. Only 19 days to get a package from Wotofo's California warehouse to Florida.
Wotofo uses a "shipping partner" called Newgistics...aka...

 

[markfm]

The Dominator I got from Element includes the RBA. More expensive tho, I found the vapesource listing after I ordered from Element.

Did the Dominator RBA fit the Hellbeast or an NRG SE? (Those are the two that had problems with the ijoy exo-s)

 

[BigPappa]

Did the Dominator RBA fit the Hellbeast or an NRG SE? (Those are the two that had problems with the ijoy exo-s)

Now I am confused. I got the revenger x's for the nrg because of the exos. Or is the nrg se different?

 

[UncLeJunkLe]

Hellbeast or an NRG SE... (Those are the two that had problems with the ijoy exo-s)

Out of curiosity, what exactly was the problem with the EXO S RBA not fitting each those tanks? Didn't screw into the base? RBA wick holes covered by oring? Chimney on tank too short or too long? Chimney opening on tank too wide or too narrow? Somethign else?

 

[440BB]

Now I am confused. I got the revenger x's for the nrg because of the exos. Or is the nrg se different?

I believe the NRG tank has more room for the width of the coil base than the SE.

 

[Haktuspit]

Well my two Dominators that I have coming in I really can't remember if I selected RBA head or if there was even a selection. Hopefully it will come with the RBA head.

 

[bnrkwest]

Did the Dominator RBA fit the Hellbeast or an NRG SE? (Those are the two that had problems with the ijoy exo-s)

Does not fit NRG, I'll have to check the Hellbeast

 

[bsidb]

glad im not into this Hellbeast , NRG etc, rba fiasco its eye crossing just reading about it, s

 

[markfm]

Now I am confused. I got the revenger x's for the nrg because of the exos. Or is the nrg se different?

My test:
-0.42 ohm coil mounted in the RBA
-"fits" = RBA screws in, I get a proper reading on a mod, there's at least a little space for eliquid to reach the rba intakes.

IJoy exo-s fits:
Gv Cerberus
Vaporesso NRG (Pretty small eliquid path, but should be fine for thinner eliquid)
Vaporesso SKRR-S

Doesn't fit:
Hellvape hellbeast (RBA won't screw in far enough for contact)
Vaporesso NRG SE (RBA won't screw in at all)

YMMV, but these are my results. I'll pop the cccell 2 out of my running NRG, verify that the exo-s does vape okay with my 50/50 mix.

 

[Astron]

glad im not into this Hellbeast , NRG etc, rba fiasco its eye crossing just reading about it, s

I understand maybe half of what the people on ECF discuss and just smile and nod politely through the rest, trying to learn via osmosis

I am so happy with my FT delivery today. Granted it is all in the stock box. Since it looks like I am branching out into SXK Billet Box territory, my FT purchases are not complete, and as usual I will be forced to eat my former sanctimony with a smile.

But as for squonks, mods, RTAs, RDAs, connectors, glass, etc etc etc etc, good golly Moses. I think I have enough enough.

 

[bnrkwest]

Does not fit NRG, I'll have to check the Hellbeast

Well it, Dominator RBA, screws in the Hellbeast but the pin on RBA does not look like it is touching the bottom of the base and the glass is too short.

 

[markfm]

glad im not into this Hellbeast , NRG etc, rba fiasco its eye crossing just reading about it, s

Honestly, I generally use an RTA (or rdta) if I want a self-contained tank. Hellbeast/Cerberus/NRG/NRG SE all fit "normal" baby beast-compatible heads; my reason for picking up these tanks is they can all fit the coils I've picked for my "if I can't build" stash, worth a boatload of other compatible heads available.

The RBA heads are an "extra". The Marvec Hellbeast RBA is the smallest diameter, fits everything I've tried it on so far. The ijoy exo-s rba is a bit fatter, fits fewer tanks though I like its build more than the Marvec.

 

[markfm]

Well it, Dominator RBA, screws in the Hellbeast but the pin on RBA does not look like it is touching the bottom of the base and the glass is too short.

Thanks for checking! I'll also play with it when I get mine in.