In a Baby Beast with the longer glass. I think most any tank that could use it will require longer glass too.So, the Smok baby beast rba should work fine??
glad im not into this Hellbeast , NRG etc, rba fiascoits eye crossing just reading about it, s
Yes. I saw a couple references to it being a fairly tight draw. That might be up my alley, if it works in the restricted DL zone, else I'll pass them along to mtl users.
Another note, if someone has a Cerberus and wants to run the Baby RBA, apparently the Geekvape Illusion Mini glass fits the Cerberus and gets the right height to use that deck. I haven't tried this, just something I saw looking on the Web.
OK, thought I'd doublecheck with some of you on the following. A friend has/uses the Cerberus tank, and loves it. I want to be sure that the SMOK TFV8 Baby RBA that's been discussed...does indeed work in it. I'd like to teach him how to use it, too, and not just use drop-in coils. I remember there being posts about needing a taller replacement glass for some of the tanks that are compatible with that RBA. However, I don't remember if it was the Cerberus, too. So, any input from those who have actually used that RBA in a Cerberus would be appreciated.
There are three options I'm aware of - the Smok Baby RBA, Hellvape Hellbeast RBA and the Ijoy EXO-S RBA. Only the Smok RBA requires a longer glass, the Geekvape Illusion Mini glass for the Cerberus, from another member's test. The Hellbeast RBA's are pretty hard to find. The Ijoy ones, available at Eightvape for $1.99, are simple single coil heads. A few other TFV8 style tanks came with an RBA head but they're pretty obscure.
The augvape intake glass will allow you to use the smok baby beast rba. I figured it out by just trying different glass from different tanks I have.
I run the TFV8 Baby coils in the Cerebus. There are a wide range of coils so finding one you like shouldn't be a problem. I have also used the Hellbeast RBA deck in it.
Be warned though that using the TFV8 Baby rebuild deck will require a glass change where the hellbeast one does not.
A single coil option for the Cerberus is the iJoy Exo-S, iJoy Exo-S Single Coil RTA Less than $2 apiece
No glass or anything change.
My Coil Master 521 Tab wouldn't pick it up, but my Solo had no problem with it. Very easy build, just gotta make sure to put just enough cotton into the wells to see it through the wicking holes, not all the way to the bottom. Just got mine in today, vapes great with a 3mm, Kanthal, 28G, 4/5 wrap, .95 ohm coil @ 21W!
P.S. Someone here posted the link to where I found this compatibility, so THANK YOU WHOEVER YOU ARE!
To use the BB RBA on the Cerberus you need a different tank glass. I posted on it yesterday evening.
RBA that work directly are the Hellbeast RBA (may be out of stock now) and the ijoy exo s ( iJoy Exo-S Single Coil RTA ). I haven't run the ijoy yet (have 3 on order), but a thread I was reading specifically talked about it as directly usable.
(Whoops, 440BB beat me to it, precisely the same info [emoji16])
Heartland Vapes is on the ball. They emailed me back this morning on the missing bottles, I already have a tracking number[emoji106]
The tiny description of that thing on EightVape says it's the "Original build deck compatible with the Exo RTA tank". The single pic of it doesn't look at all like any other RBA coils I have for various tanks. It's hard to see how what's shown is going to fit inside the Cerberus, like a replacement coil would.
I ordered these
$1.97 (Free Shipping) Replacement Glass Tank for Augvape Intake RTA Atomizer (2-Pack) (27mm, Glass, Translucent, 2-Pack) at m.FastTech.com
I haven’t tried them yet. I just took an extra glass from one of my intake tanks and it worked.
Ok for anyone that ordered the iJoy EXO-S rebuild deck. So far I have tried it in the Ohmie (no dice), the NRG SE (Screws in but glass is too short), and the Hellbeast (Screws in but the glass is too short). I haven't dug my way to a cerebus tank yet to try it. I am betting it works with the baby beast as that one is setup for a longer glass but have not dug to a clean one to try it.
If anyone else has other/better results please let me know.
I checked with someone here on ECF who indicated the 8vape ijoy exo s rta product does fit Cerberus, no glass change.
On Sat I'll have mine in, will cross check them on Cerberus/Hellbeast/NRG/NRG SE, see what I find.
edit: multiple quoted posts on on this topic
Ijoy exo s rta (really an rba). I got 3 in today.
Nicely constructed.
Counterclockwise coil needed.
Works with the original glass on tanks - no extender glass needed.
Relatively wide, on the Cerberus the bubble glass is nice to use.
Compatibility (fit):
Cerberus - Yes, may need to slightly push in on the positive contact from the connector side to get clean contact; I did this with no head or rba connected. All 3 rba worked fine across multiple connections after I did that.
NRG - Yes, works fine, no adjustments
Hellbeast - No, didn't seat properly, no contact (previously noted by others)
NRG SE - will test later today
SKRR-S - will test when I get it in, expect a Yes
I got the exo rbas I ordered and built one in a Cerberus. It’s working very good so far.
The exo s rta is compatible with Cerberus, NRG, and SKRR-S.
It's generally a baby beast form factor, but a wide base, so not compatible with Hellbeast, NRG SE.
(Not sure about other tank compatibility).
I tried the ijoy exo s RBA in the SKRR s, the Cerebus and NRG and it fits all 3 with no need of other glass, yippee
I does fit the Ello Duro base but needs shorter glass, so I need to see what I can find.
So what's the list of tanks that can use the EXO-S RBA without any modifications whatsoever?
I know for sure:
Any other tanks?
- iJoy EXO RTA (obviously)
- Vaporesso SKRR Tank
- Vaporesso NRG Tank (but not NRG SE)
- Geekvape Cerberus
Well...iJoyusa.com has 543 of them. Of course...they're $14.90 each there. But, that's on Sale, as they were $16.99 each!
Cerebus can also use the Marvec RBA without a glass change. It can also use the TFV8 Baby Beast RBA with a glass change.
Hellbeast, Cerebus, TFV8, SKRR. NRG tanks can I believe all use the NRG, SKRR, TFV8 Baby beast, cerebus and hellbeast coils.
The exo rba fits the Cerberus without making any changes. I’m running one right now. I’m not sure about the hellbeast. The baby beast rba will work if you use the longer glass from the augvape intake.
Hellbeast rba fits hellbeast/Cerberus/SKRR S/NRG/NRG SE/Likely Smok BB
Exo s fits Cerberus/SKRR S/NRG
Thank you so much for lumping it all in one place! My head was starting to spinTell me about it ...
RBA Deck Compatibility Posts
iJoy Exo-S Deck $2.41 if in stock <- markfm said check-out is disabled
Ijoy Exo $4.95
Correct.So, just because a tank takes baby beast coils doesn’t mean the Smok rba will fit, without a glass change?
As of right now, the Marvec Hellbeast RBA is the only one I've seen that fits Hellbeast/Cerberus/NRG/NRG SE/SKRR-S. It has the smallest base size, closest to prebuilt heads.
I automatically see billet box when I read BB lol. I’m not helping myself hereCorrect.
As of right now, the Marvec Hellbeast RBA is the only one I've seen that fits Hellbeast/Cerberus/NRG/NRG SE/SKRR-S. It has the smallest base size, closest to prebuilt heads.
It is the most likely to fit other BB-compatible tanks that I've seen so far.
Eightvape.com. Use code 10OFFJAN for $10 off your order.For those of us sitting in the back of the classroom...(and, evidently, occasionally dozing off)...WHAT is the site that has the Starrs and $10 Off Coupon???
Thanx...
..
The baby beast RBA COMES WITH the glass you need to change to on SOME baby beast tanks (there were several versions made).So, the Smok baby beast rba should work fine??
Tell me about it ...
RBA Deck Compatibility Posts
iJoy Exo-S Deck $2.41 if in stock <- markfm said check-out is disabled
Ijoy Exo $4.95
#40308
#40377
#40378
#40397
#38878
#40227
#40382
#40409
#40418
#40503
#40529
#40626
#40673
#40940
#40988
#41342
#41481
#41596
#42314 Tank/Coil Compatibility
#42833
#42841
Ty. I had to go look. The ones I ordered do have the glass. Phew!The baby beast RBA COMES WITH the glass you need to change to on SOME baby beast tanks (there were several versions made).
It's probably the SKRR! LOLThe real question is which tanks can handle all three - the Hellbeast/Marvec RBA, the Dominator RBA and the EXO-S RBA.
Baby RBA Supertanks! So flexible they'll last 'till the next Millennium!
Thanks, been following it. I got the butter mint and mixed it in a couple recipes. I think it's potential.@rosesense
Here is a recipe using butter mint from @classwife
My Cocoamint Swirl :
50ml bottle
1ml Cap Hot Cocoa
1/2ml Pur Butter Mint
1/2ml cap graham cracker
1ml Cap Vanilla Cupcake
1ml TFA Vanilla Swirl
There is also an entire thread here:
Uses for Butter Mint
I've actually never owned a Breeze so I don't have that to compare it to. It takes the same pods and coils though so assuming the power source works well with both there really shouldn't be much of a difference between the two.
Can anyone
I automatically see billet box when I read BB lol. I’m not helping myself here
So, is this person correct or incorrect?
View attachment 863655