Aromamizer

[s0uthstar]

some how i stripped one of the grubs screws for my aromamaizer. i cant find anything that small to get it out. any advice on how to get the screw out of the post? i need help

thank you in advance

 

[suprtrkr]

You might tryba 00 easy out.

 

[Rabbit Slayer]

 

[Douggro]

Did you actually strip the threads in the post, or is it the hex head inside the grub screw that's been rounded out?
For a rounded-out head, sometimes using a SAE size Allen wrench that's just a bit bigger will give enough purchase to break it loose. My calipers are reading the supplied wrench at 1.25mm / 0.049in / 3/64ths; a 1/16th Allen might do the trick.
If the threads are stripped, and EZ-Out might do it, otherwise I think you're drilling and re-tapping the holes.. Or get a replacement deck.

 

[s0uthstar]

Did you actually strip the threads in the post, or is it the hex head inside the grub screw that's been rounded out?
For a rounded-out head, sometimes using a SAE size Allen wrench that's just a bit bigger will give enough purchase to break it loose. My calipers are reading the supplied wrench at 1.25mm / 0.049in / 3/64ths; a 1/16th Allen might do the trick.
If the threads are stripped, and EZ-Out might do it, otherwise I think you're drilling and re-tapping the holes.. Or get a replacement deck.

i took your advice & used a bigger allen. it took a few tries to get it to fit in there but once it did it came out like a charm. thanks! only other problem is that i slightly bent one of the posts. i hope this doesnt affect the vape quality

 

[Stinkytofus]

Just buy another, so cheap now

 

[Douggro]

i took your advice & used a bigger allen. it took a few tries to get it to fit in there but once it did it came out like a charm. thanks! only other problem is that i slightly bent one of the posts. i hope this doesnt affect the vape quality

Just buy another, so cheap now

Lots of experience working on equipment with SAE/Metric hex screws..you learn a few tricks. Bent post should affect anything too much AFAIK, except I read of someone snapping the positive post off in theirs. Isn't FastTech carrying the decks? I think that's where I saw them for a few bucks apiece.

 

[BreSha6869]

Lots of experience working on equipment with SAE/Metric hex screws..you learn a few tricks. Bent post should affect anything too much AFAIK, except I read of someone snapping the positive post off in theirs. Isn't FastTech carrying the decks? I think that's where I saw them for a few bucks apiece.

Yup. I have a few of them in my shopping cart for my next Fasttech order. I thought mine was screwed up but thankfully @Douggro helped me figure it out.

$2.54 or $2.21 each if you buy 5.

$2.54 Replacement 2-Post Deck for Aromamizer RDTA Atomizer (2-Post Deck, SS, Silver) at m.FastTech.com

 

[Douggro]

Yup. I have a few of them in my shopping cart for my next Fasttech order. I thought mine was screwed up but thankfully @Douggro helped me figure it out.

$2.54 or $2.21 each if you buy 5.

$2.54 Replacement 2-Post Deck for Aromamizer RDTA Atomizer (2-Post Deck, SS, Silver) at m.FastTech.com

Questions about whether that's a genuine deck..

 

[Jim_ MDP]

My Hero.

And he's a cutie too. (#nohomo) (nttawwt)

 

[BreSha6869]

Questions about whether that's a genuine deck..

Yup. That's the $2.54 question with those guys.