Aspire Atlantis Sub Ohm Coil Replacement Head
Available in 0.5Ω (+/- .2) resistance.
These replacement sub ohm coil heads are intended for the Aspire Atlantis sub ohm tank, and are not compatible with the Aspire Nautilus line of clearomizers. In their performance, these coils rival that of rebuildable atomizers, offering incredible pure flavor and tons of vapor!
Changing the coil is easy: simply unscrew the base of the Aspire Atlantis, unscrew the old coil and replace with a new one! To fill the Atlantis, hold the unit up-side-down, unscrew the base and fill with 2ml of e-liquid (be careful not to get any e-liquid down the center tube - a needle-tip bottle makes the task effortless.) Screw the base back on and you are ready to vape. (Please allow a few minutes for the e-liquid the saturate the coil if using a brand new coil.)
PLEASE NOTE: For best results and for your safety, we recommend running the Atlantis between 20-30W. The Atlantis should only be used with devices capable of handling sub ohm coils! If using a mechanical mod, please only use High Drain batteries with a high amp limit; if using a variable power mod, please use one capable of putting out 20W or higher. NEVER use this or any sub ohm device on an eGo battery or a device that can not handle sub ohm coils. It is for your safety!
Price is for a single piece.
The Aspire Atlantis Sub Ohm Tank is available here.
Available in 0.5Ω (+/- .2) resistance.
These replacement sub ohm coil heads are intended for the Aspire Atlantis sub ohm tank, and are not compatible with the Aspire Nautilus line of clearomizers. In their performance, these coils rival that of rebuildable atomizers, offering incredible pure flavor and tons of vapor!
Changing the coil is easy: simply unscrew the base of the Aspire Atlantis, unscrew the old coil and replace with a new one! To fill the Atlantis, hold the unit up-side-down, unscrew the base and fill with 2ml of e-liquid (be careful not to get any e-liquid down the center tube - a needle-tip bottle makes the task effortless.) Screw the base back on and you are ready to vape. (Please allow a few minutes for the e-liquid the saturate the coil if using a brand new coil.)
PLEASE NOTE: For best results and for your safety, we recommend running the Atlantis between 20-30W. The Atlantis should only be used with devices capable of handling sub ohm coils! If using a mechanical mod, please only use High Drain batteries with a high amp limit; if using a variable power mod, please use one capable of putting out 20W or higher. NEVER use this or any sub ohm device on an eGo battery or a device that can not handle sub ohm coils. It is for your safety!
Price is for a single piece.
The Aspire Atlantis Sub Ohm Tank is available here.
