Aspire Cyber S Pod Kit Review By Frenkyou

Status
Not open for further replies.

Frenkyou

Ultra Member
ECF Veteran
  • Apr 26, 2019
    1,955
    2,044
    56
    italy
    www.svapo.it
    Aspire-Cyber-S-Pod-Kit-1.jpg


    Hello, today let's take a look at Aspire Cyber S. In this Test I will examine each of the characteristics that distinguish this item. I hope that at the end of this reading you can understand this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
    • Enjoy the reading.

    ► Aspire Cyber S; Before starting, let's see together some special features indicated by the manufacturer:

    • Leakage protection
    • Optional 3ml PCTG cartridge or kit
    • Top filling system (side pod 3ml)
    • Transparent cartridge design
    • 3 different activation modes (auto fire, fire button or fire button + auto fire)
    • 360° color LED ring to display battery level and operating status

    Aspire-Cyber-S-Pod-Kit-2.jpg


    ► Aspire Cyber S; Packaging:
    The packaging shows both sides of the device on the front, both the transparent and the metallic side, in addition there are generic warnings about nicotine. On the back are; the content, the addresses of the manufacturer, the logos and trademarks of the law and still generic warnings.

    Aspire-Cyber-S-Pod-Kit-3.jpg


    On the narrow sides you can see; a stylized drawing of the kit, the main characteristics in the form of icons, a barcode, an indication of the color of this sample (Hunter Green) and the Scratch & Check for checking the originality of the device.

    Aspire-Cyber-S-Pod-Kit-4.jpg


    ► Aspire Cyber S; Packing List:
    • 1* Aspire-Cyber S Pod mod
    • 1* Cyber TSX Pod Mesh 0.8Ω (2ml)
    • 1* Cyber TSX Pod Mesh 1.0Ω (2ml)
    • 1* USB Type-C Cable
    • 1* User Manual

    Aspire-Cyber-S-Pod-Kit-5.jpg


    ► Aspire Cyber S; Specifications:
    • Length: 118.5mm
    • Width: 24mm
    • Thickness: 16mm
    • Weight: 54.5g
    • Material: Zinc Alloy, PC, PCTG
    • Built-in 700mAh battery
    • USB Type-C fast charging
    • ASP chips
    • Selection of the activation mode via 3 clicks of the fire button
    • Extensive protection systems (short circuit, overheating, undervoltage, overload, discharge, time out)
    • Magnetic pod holder
    • Air supply can be changed by rotating the pod (MTL or RDL)
    • Designed for MTL and RDL
    • Compatible with Aspire TSX Pods

    Aspire-Cyber-S-Pod-Kit-6.jpg


    ► Aspire Cyber S; Available colours:
    • Gunmetal
    • Black
    • Hunter Green
    • Red
    • Royal Blue

    Aspire-Cyber-S-Pod-Kit-7.jpg


    ► Aspire Cyber S; First Impressions:
    Among the countless proposals for devices with disposable cartridges that have saturated and continue to saturate the market, Aspire is always welcome because their products are always perfected and the design is always more innovative, fascinating and futuristic to improve the vape experience at any level even in basic devices like these. To meet the personal aesthetic tastes of every vaper ASPIRE recently launched the Cyber series with 3 devices; Cyber S , Cyber X and Cyber G which are very similar to each other in terms of technical characteristics but completely different from each other in terms of form factor. Here you can check out my previous Cyber X review

    Aspire-Cyber-S-Pod-Kit-8.jpg


    Aspire has taken care of the futuristic design of Cyber S starting from a classic "vape pen" style rather thin on the sides and with the two shells of metal and transparent plastic that are perfectly blended with each other with smooth curves and with precision of assembly for great portability and for great tactile feedback. In the upper lateral part you can see the only airflow for the passage of air from the outside to the inside where the coil is present. The sizing of the airflow port is compatible with MTL/RDL type extractions and since the TSX cartridges are the same as Cyber X I'm sure of this.

    Aspire-Cyber-S-Pod-Kit-9.jpg


    The Cyber S control panel features a multi-function metal power key that incorporates aspire's new "0I" branding. The button is surrounded by a LED for checking the residual battery level. The transparency of this side allows you to see the liquid contained inside the cartridge, but you can also see a part of the chipset that is located under the power button. Towards the bottom you can see the writing "Cyber S Next Gen Upgrade the futuristic style Neo effect", the writing is above an internal decorative insert that offers shimmering shades of color.

    Aspire-Cyber-S-Pod-Kit-10.jpg


    Through the 5-click power button you can turn on/off the device. With 3 clicks you can select your favorite vape mode, two small internal LEDs emit a strong white light that allow you to view the current extraction setting, while the LEDs flash you can select your preferred mode by pressing the button again, then you can confirm the choice with a further pressure of the key.

    • Mode A: Left LED on; the automatic extraction mode is activated.
    • Mode B: Right LED on: manual extraction mode is activated.
    • AB mode: Both LEDs are on; automatic and manual extraction modes are activated.


    Aspire-Cyber-S-Pod-Kit-11.jpg


    For this test I received the Cyber S version in "Hunter Green" color which is recognizable by the metal part painted in this color and by a silver "Aspire" writing.

    Aspire-Cyber-S-Pod-Kit-12.jpg


    The 5V 2A charging port is positioned on the lower base and allows the 700mAh battery to be recharged in a very short time of just 30 minutes. When you insert the Type C connector to recharge the device, the Led lights show the charge level (even during vaping) as follows:

    • Red Led: The charge level of the device is less than 30%
    • Blue Led: The charge level of the device is between 30 and 60%
    • Green Led: The charge level of the device is between 60 and 100%


    Aspire-Cyber-S-Pod-Kit-13.jpg


    Inside the compartment/pod are present; the puffs automatic activation sensor, the air passage channel towards the coil, and two magnets to keep the cartridge firmly in place. There is a sticker on the bottom of the pre-installed cartridge that needs to be removed.

    Aspire-Cyber-S-Pod-Kit-14.jpg


    ► Aspire Cyber S; Disposable Pods:
    The cartridge supplied with Cyber S TPD has a black spout that has a comfortable anatomical shape for the lips. After removing the protective sticker on the bottom of the cartridge you can see two different air ducting holes, one hole is bigger (RDL) and one hole is smaller (MTL).

    Aspire-Cyber-S-Pod-Kit-15.jpg


    You can quickly vary the MTL or RDL vaping mode by simply changing the direction of insertion of the cartridge into the mod.

    Aspire-Cyber-S-Pod-Kit-16.jpg


    The kit includes two different disposable Pods (TPD 2ml), both with internal Mesh resistance, one with a resistive value of 0.8Ω and the other with 1.0Ω. Once the black spout has been removed, you can conveniently fill the cartridge through the refill port which is equipped with a safety membrane. One aspect that I really liked is that when filling it is not necessary to remove the cartridge from the device.

    Aspire-Cyber-S-Pod-Kit-17.jpg


    ► Aspire Cyber S; Vape test and final conclusions:

    I did this Cyber S test at the same time as the Cyber X test and since the two devices use the same cartridges I continued to use the previous cartridges already used in Cyber X. MTL/RDL extraction is equivalent on both devices . I remind you that I used "crispy" aroma diluted 10% in a 50:50 solution of VG/PG with 3mg/ml boost.


    Depending on the pod used you can choose between two different airflow options for MTL and RDL by simply rotating the pod 180° and inserting it back into the Mod. The integrated Mesh coils offer a silent hit and with every puff you can taste an intense flavor , with a pleasantly velvety and full-bodied vapor. The level of nicotine present in the liquid is conveyed in a very effective way just like when using advanced atomizers and not simple disposable pods. The 0.8Ω and 1.0Ω Kanthal Mesh coils are very similar to each other especially in MTL mode. The 0.8Ω one logically offers better RDL performance with a slightly hotter vapor. Both cartridges offer crystal clear flavor right out of the box and no weird plastic tastes. You must wait at least 5 minutes the first time you use the new cartridges to allow time for the cotton to soak up the liquid. A very pleasant note is that the cartridges are absolutely free of leaks or anomalous formation of condensation, therefore the compartment / pod is always dry and clean. The internal liquid level is always under control and it is not necessary to remove the cartridge to check it. Also available separately are oversized 3ml cartridges with side filling, the 3 and 2ml cartridges (visible in the image below) are fully compatible with Cyber X and S devices.

    Aspire-Cyber-S-Pod-Kit-18.jpg


    The Cyber S Pod-Mod offers extensive control over the type of draw which can be selected with 3 different activation modes. The modern ASP chip offers extensive security features. The built-in 700mAh battery has excellent durability and guarantees a constant output voltage of 3.4 volts. With 2A USB Type-C fast charging, the battery is fully charged in no time. Aspire's Cyber S is definitely a winner in its category, because it is suitable for newbies who seek both tight MTL vaping and moderately smooth RDL vaping. Thanks to its attractive and compact "vape pen" form factor, the Cyber S can be easily transported and displayed with pride.

    I would like to thank Aspire for providing me with the kit. I hope this review has been helpful for anyone looking to purchase the Cyber S.

    Thanks for reading.

    Aspire-Cyber-S-Pod-Kit-19.jpg
     
    Status
    Not open for further replies.

    Users who are viewing this thread