Aspire Nautilus guide

Status
Not open for further replies.

dougelkins18

New Member
Nov 26, 2014
1
0
AR
Like the title says this is a simple set up and use guide to the nautilus I love.

Set up:
1. Gently place your hand around the glass top and your other hand around the area where the airflow hole is.
2. Turn the top upside down and fill the area around the center metal tube with juice making sure you leave a bit of room at the top and making sure you don't get any juice into the center.
3. Turn the bottom piece upside down and put the top of the atomizer into the metal center of the still upside down top section. Screw the bottom in making sure it is snug but not too tight, just hand tight
4. Put the now reassbled Nautilus onto your battery and screw it in.
5. Plug the airhole with your finger and suck on the top of the Nautilus. This will get any air bubbles out of the atomizer. Do this generously for your first use.
6. Hit your button and enjoy.

Use:
1. I found the best voltage setting is around the 3.8-4.0 area. This makes nice clouds and good flavor.
2. Every once in a while check to make sure the vape is still screwed on tight.
3. ! Important note! When you set your vape down try to make sure the airhole for the Nautilus is facing up. This will keep juice from leaking out the hole

Enjoy your new or old Nautilus
 
Status
Not open for further replies.

Users who are viewing this thread