Aspire Nautilus Mini BVC atomizer

[Drea8485]

I just received my first nautilus Mini and I was making sure I could take the whole thing apart so I would know how to put it back together to change the bvc atomizer, add liquid, etc. However I cannot unscrew the BVC from the hardware. Has anyone else had this problem? And what can I do to unscrew it?

 

[Twinjuice]

You have to unscrew the bottom section first. Then you should be able to unscrew the top half.

 

[Topwater Elvis]

Lefty loosey - righty tighty, try putting it in the freezer for 5 - 15 minutes, they can be difficult to unthread / easy to over tighten, a drop or two of juice on the base gasket helps.

 

[djsvapour]

Your coil is stuck in the base?

Hmm... could require some strong but careful use of tools or kitchen gloves.

Tell us more?

 

[gon8108]

For me rubber gloves working.

 

[Twinjuice]

Normally I use papertowel, soaks up any juice and isnt sticky

 

[Drea8485]

Yeah it's stuck in the base, I tried to change it in between flavors, I dried it off to make sure it wasn't slippery and it wouldn't budge at all, I just couldn't unscrew it, I tried using a papertowl to get a better grip, and that didn't help. I'm afraid to use something like pliers because the metal seems pretty thin and I don't want to ruin the top part of the coil. I will try the freezer thing when I get home. And this is the one that came already put together.

 

[Drea8485]

For me rubber gloves working.

I will try this later... may get a better grip than the paper towel.

 

[wmtdriver]

I use a piece of that rubber shelf liner that has the little holes in it. they sell if cheap at wal-mart. also comes in round pieces for coasters.

 

[Tim Swan]

Is your new aspire nautilus mini authentic?

Sent from my SM-T900 using Tapatalk

 

[Drea8485]

Is your new aspire nautilus mini authentic?

Sent from my SM-T900 using Tapatalk

Yes, it came in the back with the scratch and check on it.

 

[Drea8485]

Thanks everyone, I stuck it in the freezer for about 5 minutes and used the rubber kitchen gloves and it unscrewed really easily, after putting it in the freezer I don't even think I needed the rubber gloves.

 

[Bigbob2322]

Glad the freezer trick worked for you.