Atmizoo Tripod RTA

[ShowMeTwice]

@ShowMeTwice, the positive post o ring interests me. As it seems that the Ulton clone doesn't have one fitted.

Is it possible for someone to upload a photo of it's installation? As I'm unsure as to where it should be fitted.

As does it go in the cutout in the deck and then does the insulator go through it to create a seal? As I don't think that it goes on top of the insulator, as that wouldn't work.

The positive post o-ring (SIL 6mm x 1.5mm) gets installed on the positive post.

The positive post slides down into the positive post insulator from the top. Per the diagram.
.......
...........positive post.................................positive post insulator

......

And by Vapour Chamber seal, I mean the joints between the Vapour Chamber and Top Cap/Chimney Extension. Hopefully that'll clear things up.

But I notice that it's not mentioned at all in the genuine manual, so could someone confirm that the genuine is fitted with one there.

If it is not on the official Atmizoo Tripod parts diagram then there isn't one. Taz and crew are super thorough with their documentation. Just like SVM is with the doc. for the kayfun's. If there was an o-ring there it would be in the diagram and noted. Furthermore it would be part of the spare o-ring kits Atmizoo sells. I have a few of those.

 

[ShowMeTwice]

While looking through my Tripod spare parts I came across the Atmizoo Long Top DT. Don't recall buying one, but I did. Silly me!!!
Looks tall but it is only 15mm (visible), POM (acetal) and 3mm bore. Nice MTL.

Tripod ice matte (2ml) on the Solare DNA75.

 

[Katya]

Glad to say...a 510 drip tip fits perfectly on the clone. The tip fits loose into the cap only, but with the cap on the tank, the tip goes in solid.
The white rubber seal inside the cap has to be removed though.
View attachment 896917

While looking through my Tripod spare parts I came across the Atmizoo Long Top DT. Don't recall buying one, but I did. Silly me!!!
Looks tall but it is only 15mm (visible), POM (acetal) and 3mm bore. Nice MTL.
View attachment 898063
Tripod ice matte (2ml) on the Solare DNA75.

Love the drip tips.

And hello--in here! Glad I found you!

 

[Mordacai]

@ShowMeTwice, I've noticed a channel in the deck of the Ulton clone that you could put an o ring in.

But their installation is this.

1st Insulator.
2nd Positive deck terminal.
3rd Air tube (I think that's what Atmizoo calls it).

No o ring at all, so I'm going to have to do some more research on this. As I'm totally intrigued and want to work this out, as hopefully it would improve things.

And how comfortable is the Tripod MTL drip tip to use @ShowMeTwice? As it does look more fitting, but looks aren't exactly everything.

 

[ShowMeTwice]

And how comfortable is the Tripod MTL drip tip to use @ShowMeTwice? As it does look more fitting, but looks aren't exactly everything.

I like it, it's very comfortable. I've been using it on the Tripod since I found it earlier. Nice smooth hit, yet solid. It's a fine MTL DT.

It uses the same two piece system already in-place with the default DT. Fits very solidly, no wobble at all. I'm happy I bought one!

 

[ShowMeTwice]

Love the drip tips.

And hello--in here! Glad I found you!

Glad you found us too!

 

[Mordacai]

I have looked into the MTL drip tip before, so I was already aware that they attached in a similar way to the one that is fitted as standard. Which means that there's less chance of losing it when you fill the tank, which is always useful.

But I had no ideas on the comfort of them. But you never know until it's too late, and then it's too late.

Another comfortable 510 MTL drip tip is the Taifun GTR one, whether clone or original.

I'll have to upload some photos at some point of an Ulton Taifun GX RDTA with a GTR drip tip as it's an MTL project for my Ma, but they do go together quite well aesthetically. Unfortunately they don't go together physically well at the moment due to dubiously sized o rings on the drip tip, well they do say that no good deed goes unpunished.

At least I can put some more o rings on my shopping list to make up an order though.

 

[AngeNZ]

I've only had a couple of days with this magic lil RTA. The flavour notes it brings out in your juices is what blew me away the most. I also love how smooth the airflow is. I love it

 

[Mordacai]

@AngeNZ, I still love the fact that it's the only RTA to leave Jai Haze speechless.

That's a feat in itself.

Could I ask how've you got it setup?

 

[AngeNZ]

@AngeNZ, I still love the fact that it's the only RTA to leave Jai Haze speechless.

That's a feat in itself.

Could I ask how've you got it setup?

No chamber/chimney reducer and no MTL insert. Running a 2.5mm id, 6 wrap, ka1 0.5mm x 0.2mm coil. Wicked with Kendo Gold. Vaping it @ 23.5 watts MTL

 

[ShowMeTwice]

What fun is an RTA thread without a great video!!!

It's by our own @qorax Stan. Build tips + complete tear down. The best Tripod video I've seen.

 

[ShowMeTwice]

Cleaning your glass tank section.

Once you have the base/build deck removed grab the lower SS section of the tank and unscrew it from the top cap assembly. The lower SS section, with the chamber, will unscrew as one piece. From there you have full access to the glass.

It can be a little tight trying to unscrew it. The upper/lower gaskets on the glass provide a very tight seal so it doesn't leak. Just put some ooomph into it. It doesn't need to be gorilla style ooomph or you may break the glass!!!

Pic...

From the above photo you just pull the glass away from the top cap assembly.

 

[vaper1960]

I vape mine MTL-RDL-DL (all depends).

Well I'm sold on it right there (have already heard great things about it but versatility is a big plus) I like loose MTL/restricted DL and it seems like a simple build

 

[vaper1960]

@ShowMeTwice , now I'm really excited... very detailed explanation (juice flow control sounds great) Haven't read the rest of the thread but like I said, have heard many good about this RTA (and clone) Maybe I will up grade to two thumbs up

 

[vaper1960]

Holy cow... so much useful info on this thread (bookmarked for future reference)

 

[Katya]

It's by our own @qorax Stan. Build tips + complete tear down. The best Tripod video I've seen.

Stan is one the most meticulous reviewers out there.

 

[ShowMeTwice]

Tripod replacement glass:

Per DJ at FT the Tripod glass tank measures 22mm od, 15.5mm high, 19mm id, 1.5mm thick. I measured the authentic glass as the same.

Also per DJ, and a couple others, these work perfectly.
$2.72 Replacement Glass Tank for Eleaf ELLO Mini Tank Clearomizer (10-Pack) 10-pack - 2ml at FastTech - Free Shipping

ETA: Alternatively, Atmizoo sells glass for 2ml and 3.4ml (ext).

 

[ShowMeTwice]

Stan is one the most meticulous reviewers out there.

And a super nice guy.

Don't know if you saw this pic in the authentic KFL19 thread. Stan posted it last year. It would have taken me a bit to get them all lined up like that. Plus I have a Cat, so yeah, dominoes.

I have a few of those. And the very lovely Tripod in the middle.

 

[ShowMeTwice]

Last one must have been the trial run for the Symphony RTA photo!

 

[Katya]

Last one must have been the trial run for the Symphony RTA photo!
View attachment 898227

No, I haven't seen those. But I've seen most of his pictorials he used to post here on ECF--unbelievable. I've learned so much from him.