@KTMRider Did you remove the airflow grub screw? It is possible you are having problems with conductivity if you did as the 510 shaft touches that screw.Just a thought.Also be sure the center post didn't twist on you as you tightened down the nut.
Attack of the (Kayfun Mini V3) Clones!
- Thread starter KTMRider
- Start date
- th_trl_thread_readers 0
- Status
I was worried about twisting mine when putting them back together. I took them apart just to be sure they didn't. Mine are fine making them real tight.
I didn't remove it but it's not in the way. I also made sure the pos block is centered (amateur
).
Can someone answer this Plus version question for me please?
Simply, does it hang over the side of an istick 30?
I'm cornfused. The GS Air MS is supposedly 22 mm wide, there is easily 2 mm total space on iS top outside the edges of the MS.
Then I see This reveiw with appears to be a standard 2 ml v3 Real Deal. On what to me appears to be an iS, there appears to be NO space left on the top of the iS and the standard v3 is only 19 mm wide. The standard GS Air is 19 mm and there is Noticable space on the iS top with it.
Hep me out here yall. I'll settle for a 2 ml before I have a bunch of tank base hanging over the mod edge. PS; I measured the top of my iS 30 and it's 7/8" = 22.2 mm wide. Sooo, if the specs of the Plus are correct at 24 mm wide, it Would overhang the iS 30 edges.
Bruce in Ocala, Fl
Simply, does it hang over the side of an istick 30?
I'm cornfused. The GS Air MS is supposedly 22 mm wide, there is easily 2 mm total space on iS top outside the edges of the MS.
Then I see This reveiw with appears to be a standard 2 ml v3 Real Deal. On what to me appears to be an iS, there appears to be NO space left on the top of the iS and the standard v3 is only 19 mm wide. The standard GS Air is 19 mm and there is Noticable space on the iS top with it.
Hep me out here yall. I'll settle for a 2 ml before I have a bunch of tank base hanging over the mod edge. PS; I measured the top of my iS 30 and it's 7/8" = 22.2 mm wide. Sooo, if the specs of the Plus are correct at 24 mm wide, it Would overhang the iS 30 edges.
Bruce in Ocala, Fl
Last edited:
None of us have a plus. They are new and it takes almost a month for things to ship from them.
They are listed as 24mm on FT.
They are listed as 24mm on FT.
Last edited:
Kayfun Mini V3 Plus Silver RTA Rebuildable Tank Atomizer
The description here says 24mm. Then it says width 22mm. Some are saying the base is 22 mm and the glass bulges to 24mm. Your guess is as good as mine.
The description here says 24mm. Then it says width 22mm. Some are saying the base is 22 mm and the glass bulges to 24mm. Your guess is as good as mine.
Last edited:
One more question.
I use several Eleaf GS Airs and one Air MS.
If I keep the build on a Mini v3 around the same 1.5 ohmage, will the vape temp be similar to the
GS? I assume at least Some more vape with the more extensive wicking?
Thanks for your patience.
Bruce in Ocala, Fl
I use several Eleaf GS Airs and one Air MS.
If I keep the build on a Mini v3 around the same 1.5 ohmage, will the vape temp be similar to the
GS? I assume at least Some more vape with the more extensive wicking?
Thanks for your patience.
Bruce in Ocala, Fl
It's hard to say because there are so many factors at play. I wouldn't even have a guess one way or the other.There is always a learning curve when using a tank for the first time.You can change resistances,airflow, wicking, and wattage to get it where you like but it will require some trial and error.Some tanks do some of these things better then others so research is important to get you in the ball park. I just watched a video on the kayfun minis and the bases are a slightly smaller diameter and they do bump out to some degree. Hopefully someone else will chime in that actually has the plus version.
Last edited:
You can see in the pics that the bottom of the base is smaller than where the air holes are. I bet the bottom is 22mm and 24mm at the air holes.
Got mine running..nice and smooth..no leaks..top fill actually works..air flow about 5-6 turns out from closed off..
1.7 ohm at 10-12 watts.. nice flavor and vape..
1.7 ohm at 10-12 watts.. nice flavor and vape..
Well how do you like it??? Does it taste better than what you used before?Got mine running..nice and smooth..no leaks..top fill actually works..air flow about 5-6 turns out from closed off..
1.7 ohm at 10-12 watts.. nice flavor and vape..
I think it is better..surprised it's working at all as it has the first ever coil I have made in it .
The coil and/or wick is not right though..getting a scorched taste out of it. Made out of 30g at 2.5mm, maybe to much cotton..?
Gonna try 28g at 2mm and see how that is..
IDK..open to suggestions.
.The coil and/or wick is not right though..getting a scorched taste out of it. Made out of 30g at 2.5mm, maybe to much cotton..?
Gonna try 28g at 2mm and see how that is..
IDK..open to suggestions.
I'm using 30g Kanthal at 2.5mm evenly spaced with cotton loosely fit. Vaping from 10-12 watts and getting great flavor. I use 100% PG liquids only tho. I wouldn't go any smaller on the coil and just fiddle with your amount of wick material.
I think it is better..surprised it's working at all as it has the first ever coil I have made in it
The coil and/or wick is not right though..getting a scorched taste out of it. Made out of 30g at 2.5mm, maybe to much cotton..?
Gonna try 28g at 2mm and see how that is..
IDK..open to suggestions.
Swampus, make sure you are opening the JFC enough. If you have a fair amount of cotton in the well, just open it up until you see bubbles rising. You should see bubbles every other pull or so. If you do not, open up another half turn. If you are getting a burnt taste it is usually not enough juice getting to the wicks or too high a wattage and it is burning off the liquid on the coil faster than it can feed.
What resistance did the coil come out to?
I'm using 26 ga., 3mm ID with tight cotton and then the tails thinned out a little so it does not over pack in the deck. Comes out to 1ohm and vaping at 14-15 watts. It has no trouble keeping up if I open the JFC an extra turn.
Yes what he said... I forgot to say that. I open mine 2 full turns on both mine. Never a dry hit or a flood.
Thanks Ricks and DP..
I'll will do both..first gonna look for bubbles, check jfc, than have a look at the wick/coil.
coil at 1.7-1.8 range at 10watts..
I'll will do both..first gonna look for bubbles, check jfc, than have a look at the wick/coil.
coil at 1.7-1.8 range at 10watts..
ah.. Maybe tails need to be thinned.. I remember cutting them straight and not any angle.
- Status
