hi,
For review I have the Augvape Druga 2 rda which is the renewed version of the Druga, obviously.
Features
• 24mm diameter
• 810 drip tip
• Low profile
• Deep juice well
• Gold plated SS squonk pin included
• Gold plated SS contact pin installed
• 18K Gold plated posts on black deck
• Many airflow combinations
• Upgraded Clamp Snag System
• Designed for flavor and cloud
Packaging:
1x Druga 2 rda
1x Squonk Pin
3x O-rings
1x Clamp system card
1x Warranty card
Review:
Druga 2 feels very solid and there is no over clear branding apart from the Carved in Druga logo which is in the same color. I like simple design RDA's and that is what the Druga 2 is, it fits very beautifully on any mod really.
Chamber clicks into place having the air inlets exactly locked right next to the coils. It has a tiny bit of play, but its about 1mm.
It has 6 airflow openings which can easily be covered/uncovered by twisting the top cap. While twisting clockwise it will first cover the top row and later the bottom row, so you can exactly decide how many air inlets you want uncovered, even one if you'd like to.
Drip-tip connector is sticking out a bit, but for the included drip-tip it is actually a good thing giving it a longer feel. The included drip-tip is very low profile. Any black 810 would look good on this RDA, if it has a different color then you will clearly see the drip-tip connector sticking out.
I've been mainly using it as a dripper, simply because the juice well is quite deep. Dripping it once gives me a proper 8-10 flavorful dense vape.
Lately I have been more fan of postless decks, but these posts are different than others. You actually don’t even need a screwdriver to get your coils stuck into place. The large grip textured screws can be strongly screwed into place by hand. Using a screwdriver also is no issue at all with the proper large Philips screws, a flathead screwdriver also can be used as the screw heads are quite large.
It is easy to build on if you use the right method. Clipping your coil legs in advance will make it much easier. Depending on how close you want your coils to the airflow you can clip the legs between 5-7mm. Then you need to insert both coils at the sane time and screw down the screws either by hand or with the use of a screwdriver.
You can also use it as a single coil RDA, but you do feel it really is meant for dual builds. Inside the juice well there is a slightly lowered part, with a single build this will be filled with liquid that won't be picked up by the wick.
If its about the vape experience, it delivers really outstanding flavor, what you would expect from an RDA. The airflow is not as smooth as I have wanted it to be, its a little turbulent, but not annoyingly turbulent. I'm not the type of person that often vapes above 80W, but did give this RDA a try at 100W and wow, what an insane cloud production you get from this RDA!
Conclusion:
An RDA that does what you expect it to do, deliver exceptional flavor.
It performs well as a dripper but also on top of a squonk mod with the included squonk pin.
Easy to build, easy to adjust airflow and not needing a screwdriver is quite unique.
Airflow could have been smoother.
Special thanks to @Augvape_Fiona for sending me this RDA!
More information about Augvape products can be found here:
https://www.augvape.com/
AugvapeOfficial
Thank you, take care,
Sjoerd
For review I have the Augvape Druga 2 rda which is the renewed version of the Druga, obviously.
Features
• 24mm diameter
• 810 drip tip
• Low profile
• Deep juice well
• Gold plated SS squonk pin included
• Gold plated SS contact pin installed
• 18K Gold plated posts on black deck
• Many airflow combinations
• Upgraded Clamp Snag System
• Designed for flavor and cloud
Packaging:
1x Druga 2 rda
1x Squonk Pin
3x O-rings
1x Clamp system card
1x Warranty card
Review:
Druga 2 feels very solid and there is no over clear branding apart from the Carved in Druga logo which is in the same color. I like simple design RDA's and that is what the Druga 2 is, it fits very beautifully on any mod really.
Chamber clicks into place having the air inlets exactly locked right next to the coils. It has a tiny bit of play, but its about 1mm.
It has 6 airflow openings which can easily be covered/uncovered by twisting the top cap. While twisting clockwise it will first cover the top row and later the bottom row, so you can exactly decide how many air inlets you want uncovered, even one if you'd like to.
Drip-tip connector is sticking out a bit, but for the included drip-tip it is actually a good thing giving it a longer feel. The included drip-tip is very low profile. Any black 810 would look good on this RDA, if it has a different color then you will clearly see the drip-tip connector sticking out.
I've been mainly using it as a dripper, simply because the juice well is quite deep. Dripping it once gives me a proper 8-10 flavorful dense vape.
Lately I have been more fan of postless decks, but these posts are different than others. You actually don’t even need a screwdriver to get your coils stuck into place. The large grip textured screws can be strongly screwed into place by hand. Using a screwdriver also is no issue at all with the proper large Philips screws, a flathead screwdriver also can be used as the screw heads are quite large.
It is easy to build on if you use the right method. Clipping your coil legs in advance will make it much easier. Depending on how close you want your coils to the airflow you can clip the legs between 5-7mm. Then you need to insert both coils at the sane time and screw down the screws either by hand or with the use of a screwdriver.
You can also use it as a single coil RDA, but you do feel it really is meant for dual builds. Inside the juice well there is a slightly lowered part, with a single build this will be filled with liquid that won't be picked up by the wick.
If its about the vape experience, it delivers really outstanding flavor, what you would expect from an RDA. The airflow is not as smooth as I have wanted it to be, its a little turbulent, but not annoyingly turbulent. I'm not the type of person that often vapes above 80W, but did give this RDA a try at 100W and wow, what an insane cloud production you get from this RDA!
Conclusion:
An RDA that does what you expect it to do, deliver exceptional flavor.
It performs well as a dripper but also on top of a squonk mod with the included squonk pin.
Easy to build, easy to adjust airflow and not needing a screwdriver is quite unique.
Airflow could have been smoother.
Special thanks to @Augvape_Fiona for sending me this RDA!
More information about Augvape products can be found here:
https://www.augvape.com/
AugvapeOfficial
Thank you, take care,
Sjoerd
