Avs

[imeothanasis]

I think that I found why some people have leakage to the collector tank. Its my fault!

I make some videos and in some of them I suggest you to unscrew the pin of the 510 connector, then put atomizer and then screw again the pin to make contact. But this way the pin cant seal well the liquid. So for those that havent the connector yet: Dont attemped to unscrew it, use it as it comes.

For the existing users: screw very well the pin and leave it that way. Use pliers but put ONLY A LITTLE FORCE!! Then screw the atomizer until it stops and then screw totally the liquid ring. Then open it just a bit.

vape

thats all


PS...... sorry for the mistake or the wrong directions but I had the same issue today and after 1 hour I just saw what was happening

 

[emonty]

too late, sold all my GG's and AVS's. Anyway good news for the others

 

[TVree]

Imeo--thanks for the update. This is good news; I just started playing with the 510 connector, and was having terrible leaking problems. I'll revisit that. I'm experienced with the 910s and never had problems, so this will be good, too.

As always, thanks for your straight-forwardness and great vaping products!

TVree

 

[imeothanasis]

:thanks buddy

 

[grimmer255]

hmmmmmmmmmmmm I may check this out. How exactly does the 510 get its juice and can I use any 510 without any modifications? And do you have any working prototype adapter for the 801 without modifications to the attie so that any 801 attie could work?

 

[mwa102464]

The only problem I have found with this is my center pin on my Atty has gotten pushed in to far and it grounded out, so it may depend on what kind of 510 Atty you are using, Imeo can you let us know what Manufacturer of an Atty you are using please

 

[mwa102464]

hmmmmmmmmmmmm I may check this out. How exactly does the 510 get its juice and can I use any 510 without any modifications? And do you have any working prototype adapter for the 801 without modifications to the attie so that any 801 attie could work?

The Atty gets its juice from the special connector that Imeo has made Grimmer,, where as there is a control ring so you can also adjust how much you want your Atty to drink depending on the viscosity of your juice and how you like your vape. Yes you may use pretty much any 510 Atty with no modifications what so ever.! There is no connector for an 801 Atty made by Imeo yet that I know of, however there is a way to get an 801 to work

 

[imeothanasis]

mwa, dont screw hard the 510 atomizer. Just screw it normal. If 510 doesnt screw totally there is no problem because ring will close its holes when you lock it

I use SLB 510 atomizers

 

[mwa102464]

ok will do got ya

 

[grimmer255]

The Atty gets its juice from the special connector that Imeo has made Grimmer,, where as there is a control ring so you can also adjust how much you want your Atty to drink depending on the viscosity of your juice and how you like your vape. Yes you may use pretty much any 510 Atty with no modifications what so ever.! There is no connector for an 801 Atty made by Imeo yet that I know of, however there is a way to get an 801 to work

thanks man I may try the AVS after christmas.... How did you get the 801 to work or what is your working theory? You know me I love those mini LR 801 atties especially with my GGTS v3... the adjustable draw is awesome with the 801's or any attie for that matter.

 

[B-Rad_The_Mad_Vapr]

Ok, I have a question for you Imeo and since it is related to AVS I'll post it here.
I know Gary used to offer the collection tank as a stand alone product for like $35.00 or something. I live in the US and the only way to get one from Rob is to purchase a whole GGTS unit or an AVS upgrade for older GGTS with the tank and all. My reason for wanting this is that I have multiple AVS and would like to be able to remove my AVS and colector tank as one unit and swap with another to be able to change flavors without having to empty my tank as the AVS will not drip out the bottom when still attatched to the collector tank. Is this a possibility to get Rob to sell just spare collector tank portions or get one direct from you? I would like to get at least 1extra for now.

Thanks, Brad

 

[imeothanasis]

Maybe better to buy the new AFSV3? You will have what you want plus the ability to use it in any other mod exept GGTS. But if you want only the CT then its not a problem for only one

 

[B-Rad_The_Mad_Vapr]

I do plan on getting an AFSv3 and a few of those extra caps you mentioned to convert existing AVS to AFSv3, but would still like to get 1 extra ct

 

[imeothanasis]

no problem buddy, I will send one to rob just for you

ps.... you want a full one with GGTS connector and CR or just the CT?

 

[B-Rad_The_Mad_Vapr]

A complete collector tank portion having the brass firing pin and control ring please I sent you a PM
Thank you Imeo!

 

[Poppa D]

Is the AFSV3 for sale any where? I've been checking VK, nothing there to date.

 

[mwa102464]

Not yet poppaD gonna be a bit still I believe

 

[grimmer255]

AFSv3 sounds good.... I have to wait till after christmas though... what a bummer.

 

[Poppa D]

So if its being shipped monday this week, and100 are being made, what are the chances of getting one.
My problem is trying to order from VK, it's slightly confusing. How many parts does one need to complete the device?

Sent from my DROIDX using Tapatalk

 

[B-Rad_The_Mad_Vapr]

Depends on what you have and what you want. newer GGTS is complete and usable with adjustable draw, just need the AVS (auto feed system)if you want that feature. If you want to use the AVS on a different mod, then you need bottom cap for AFSv3 to add to AVS. If you want to vape higher voltages I suggest a fuse upgrade for safety.