Awsome! DIY 3ml cartridge mod w/ integrel primer.

Status
Not open for further replies.

throbinskin

Super Member
ECF Veteran
Oct 25, 2010
670
24
San Diego
This thing works people...... and NO leaks.... No juice in the mouth...... and WOW LOTS OF vape.... I just got mine 20 minutes ago and love this!

Jon I have watched all of your video since I got mine... Your first video shows you pushing down to prime the atomizer... ??? is this for the new one to? or do I just slide the syringe part up and down with a finger over the mouth piece to create a vacuum? So far so good and NO LEAKS !!!! LOTS of vape !!! I love this thing !!!
 

joncammarata

Unregistered Supplier
ECF Veteran
Dec 22, 2010
117
1
charlotte NC USA
When I posted the Video about my new MOD the MISTICK. Most people sounded like they were turned off by the enormous length. So I wanted to say that it can be made in 2ml shorty size also. I also have another mod called the little fatty and big fatty.

I am going to drop a name in a hat for everyone that had me send them my original MOD. I will pull 4 names out and send the following free sampleS.

1 MISTICK long (5.5 ML),1 MISTICK short (2.8 ML),1 LITTLE FATTY (3 ML),1 BIG FATTY (10 ML)


1st place gets to pick one of the above

2nd and 3rd will pick from remaining 3 and then 2 mods respectively.

4th place will get what ever is leftover. Sorry 4th place.

I will do the raffle after I am done testing the "Fatties" in about 2 weeks.

the tutorial for the MISTICK is on hold also because you guys bought up all my supplies. (not complaining).

Until next time.
 

danlisi

Unregistered Supplier
ECF Veteran
May 16, 2010
687
2
so hampton nh
I built my own and at first I got a real burnt taste tried priming it a little better and it kept running dry so I cut some of the foam out and tried again same problem I guess I used a little too much foami this time I cut too much out and it leaked so I've been playing with the amount of foam and think I've finally got it right great idea when I have it down it'll be great so hopefully this time I have the foam right I'm gonna make another one in a day or two. Thanks for the great idea man
 

joncammarata

Unregistered Supplier
ECF Veteran
Dec 22, 2010
117
1
charlotte NC USA
I built my own and at first I got a real burnt taste tried priming it a little better and it kept running dry so I cut some of the foam out and tried again same problem I guess I used a little too much foami this time I cut too much out and it leaked so I've been playing with the amount of foam and think I've finally got it right great idea when I have it down it'll be great so hopefully this time I have the foam right I'm gonna make another one in a day or two. Thanks for the great idea man

That's Awesome Bro! Try a larger hole in the bottle cap tip if all else fails. Let us see a pick when you get it done.
 

misterD

Ultra Member
ECF Veteran
Verified Member
Dec 27, 2009
2,632
653
worster - crappychusetts
im vaping on mine right now! :D
so you're not supposed to use the 3ml bottle dropper tip, right? and you designed this for ego types PV, correct? another thing. the syringe you used has to be a 10ml one cos the 5ml do not fit the 3ml bottle :confused:
thanks again, Jon! I'll be back to let you guys know hows it holding later on tonight or tomorrow. I aint doing no videos review. im too shy and ugly for that...
 

danlisi

Unregistered Supplier
ECF Veteran
May 16, 2010
687
2
so hampton nh
I had problems with wicking running dry on my next one I'll drill a bigger hole in the cap thanks for the advice as for a fix on this one I modified your design a bit and cut an oval in the side of the syringe and put a balloon over it to seal it and now I can prime it with just a squeeze of the bottle it seems to be working quite well I'll be making another tomorrow and I'll try a bigger hole but I love this design it's great
 

joncammarata

Unregistered Supplier
ECF Veteran
Dec 22, 2010
117
1
charlotte NC USA
I had problems with wicking running dry on my next one I'll drill a bigger hole in the cap thanks for the advice as for a fix on this one I modified your design a bit and cut an oval in the side of the syringe and put a balloon over it to seal it and now I can prime it with just a squeeze of the bottle it seems to be working quite well I'll be making another tomorrow and I'll try a bigger hole but I love this design it's great

That's a good Idea. Did you try to just push down on the mouth piece to squeeze the bottle?
 

Noe

Senior Member
ECF Veteran
Verified Member
Jan 17, 2011
118
12
Australia
These are freaking awesome I still like your 1st tank mod the best though. Not too fussed about the fatty with the pipe sticking out the side but still a lot of people will like it.
I'm wondering if you will ship these internationally?
I plan to attempt building one myself but if I get it wrong it'd be nice to be able to get one from "the master" himself! :D
 

joncammarata

Unregistered Supplier
ECF Veteran
Dec 22, 2010
117
1
charlotte NC USA
Hey guys and gals. I am back. I had some things to take care of that were pretty Important. I am back though. I apoligize to all of you who had to wait for the mods. A lot has been going on. The mods have changed some and I have made a lot of improvements. I am making mods and filling orders as fast as these fat fingers can manage. Some of you may have received a mod that doesn't look exactly like the mod you thought you were getting. that is because I send the best version I have available. I am going to Post a vid about the changes and put together a DIY vid also. Please keep in mind I don't mind people using my idea for personnal use. As a matter of fact, I encourage it and am more than willing to help. In the video that will be posted by the weekend you will see the newest feed and atty system I have. It works on the Fatty Mod and the Awesome Mod. The Atty mod will simply be called the No-Leak Atty. I have five orders to fill for the no-leak-atty so be on the look out for the reviews. I have managed to oblitereate any leak issues and my design can be adapted to any size tank. The prices have changed and the new thread will be posted by this weekend with all the upgrades and updates.
On a personnal note, I just want to say that I truly, truly, truly appreciate the support and the overwelming ammount of compliments and positive feedback. I will not forget it. So, you are thinking, "HMMM, he won't forget it? What is that going to do for me?" Well, a fine, fine, good hearted lady by the name of Annete Bagur has decided to invest in me. She is going to pay all the cost's including the patent lawyer fees that I was having trouble raising. Further she is going to pay the set-up cost for the new websight and the initial cost of producing the production models of my mods. They will be sleaker and more user friendly since I won't be using home depot and lowes for my building materials. I am really excited to show you all the new No-Leak Atty and the New Feed system that goes on the various tank mods. OK, so back to what it means to you. Anyone that ordered a mod from me during these past months is going to get a free production model after I sell my first 200. OH and I didn't forget about the raffle. I will do the raffle mid march. 4 winners will recieve one of my mods.
For you Five peeps that have ordered the mod with these improvements please do me and others a favor and share your experience. For those that ordered an earlier version, fret not, I will send you the production model as soon as I can afford to.
Once again, THANK YOU, THANK YOU, THANK YOU!
 
Status
Not open for further replies.

Users who are viewing this thread