Battery Cases

[wood_510]

I'm looking for battery cases to protect my batteries.

I would like to find one that will fit the following:
-4-18650 batteries
-8 or 12-cr123a batteries
-8 to 12-14500 batteries
-8 to 12-10440 batteries

Does anyone have any ideas or suggestions. I found a place to get my cr123a case from but they had a fire and aren't taking orders for a while... Irony that a battery warehouse would catch fire...8-o8-o8-o

 

[chc]

I just ordered a Pelican Case. A little over kill but they have a good selection and you can get custom foam inserts.

Pelican Cases

 

[Stormynights]

I got some from Deal Extreme. I got an extra smaller one to hold atomizers.

 

[wood_510]

stormy, can you post a link for me so that I can find them.

 

[wood_510]

I have some with a rubber liner that keeps my cr2 batteries nice and neat with no rattle sound and that's what I'm hoping to find for the rest of my battery sizes if that helps.

 

[Drozd]

I'm looking for battery cases to protect my batteries.

I would like to find one that will fit the following:
-4-18650 batteries
-8 or 12-cr123a batteries
-8 to 12-14500 batteries
-8 to 12-10440 batteries

Does anyone have any ideas or suggestions. I found a place to get my cr123a case from but they had a fire and aren't taking orders for a while... Irony that a battery warehouse would catch fire...8-o8-o8-o

well lets see I got some cases from www.inanycase.com and got these:
for 8 14500 batteries: AA Battery Case - Smoke/ Black (On Sale!): inanycase.com - Memory Card Cases - Battery Cases
for 12 10440 batteries: AAA Battery Case - SM-BK ( Holds 12 -AAA Batteries): inanycase.com - Memory Card Cases - Battery Cases
the one for CR123s only hold 6...but they have others that might work..

the 18650s are harder...lighthound has some waterproof tubes but they only hold 2 in each...good part is that those are only 99 cents apiece..
I'd almost second the suggestion of a pelican case (I really like pelican cases in general) but the foam can be a pain and finding a pelican thats deep enough to hold all your batteries can be a pain.. for example lighthound has a cut foam insert for the pelican 1020 that will hold 24 cr123..but I dont think the case is tall enough on the inside to be able to hold the 18650 (4.5cm is only 45mm right?) otherwise I'd go that route and combine the CR123 and the 18650s in one case..anyway I'm rambing now..if you can find a pelican case that's tall enough just get the plain foam. Drill out a template for your batteries on a pair of thin pieces of wood the same size as the foam and use it with a hot knife or hot wire cutter to cut the foam.. it's a PITA though...BTW the pelican 1050 *should* be deep enough to fit the 18650 (with a whoping 5mm of clearance)...or lay em down and use the smaller holders to seperate the others and "nest" in the pelican

 

[wood_510]

well lets see I got some cases from www.inanycase.com and got these:
for 8 14500 batteries: AA Battery Case - Smoke/ Black (On Sale!): inanycase.com - Memory Card Cases - Battery Cases
for 12 10440 batteries: AAA Battery Case - SM-BK ( Holds 12 -AAA Batteries): inanycase.com - Memory Card Cases - Battery Cases
the one for CR123s only hold 6...but they have others that might work..

the 18650s are harder...lighthound has some waterproof tubes but they only hold 2 in each...good part is that those are only 99 cents apiece..
I'd almost second the suggestion of a pelican case (I really like pelican cases in general) but the foam can be a pain and finding a pelican thats deep enough to hold all your batteries can be a pain.. for example lighthound has a cut foam insert for the pelican 1020 that will hold 24 cr123..but I dont think the case is tall enough on the inside to be able to hold the 18650 (4.5cm is only 45mm right?) otherwise I'd go that route and combine the CR123 and the 18650s in one case..anyway I'm rambing now..if you can find a pelican case that's tall enough just get the plain foam. Drill out a template for your batteries on a pair of thin pieces of wood the same size as the foam and use it with a hot knife or hot wire cutter to cut the foam.. it's a PITA though...BTW the pelican 1050 *should* be deep enough to fit the 18650 (with a whoping 5mm of clearance)...or lay em down and use the smaller holders to seperate the others and "nest" in the pelican

That's perfect thanks Drozd

 

[Drozd]

That's perfect thanks Drozd

no problem as I was posting you apparently posted about your cr2 case which sounds exactly like the ones from inanycase ..glad I could be of help

 

[Stormynights]

DealExtreme: $1.49 Soshine 2*18650/4*CR123A Battery Protective Case
DealExtreme: $2.44 4 x AA Battery Case Holder (3-Pack)
I just use these little cheap ones.

 

[wood_510]

Thanks stormy!!!

 

[Uncle Pennybags]

Free shipping at dealextreme too. May take a couple week from China though.

 

[Mist_Of_Joye]

well lets see I got some cases from www.inanycase.com and got these:
for 8 14500 batteries: AA Battery Case - Smoke/ Black (On Sale!): inanycase.com - Memory Card Cases - Battery Cases
for 12 10440 batteries: AAA Battery Case - SM-BK ( Holds 12 -AAA Batteries): inanycase.com - Memory Card Cases - Battery Cases
the one for CR123s only hold 6...but they have others that might work..

the 18650s are harder...lighthound has some waterproof tubes but they only hold 2 in each...good part is that those are only 99 cents apiece..
I'd almost second the suggestion of a pelican case (I really like pelican cases in general) but the foam can be a pain and finding a pelican thats deep enough to hold all your batteries can be a pain.. for example lighthound has a cut foam insert for the pelican 1020 that will hold 24 cr123..but I dont think the case is tall enough on the inside to be able to hold the 18650 (4.5cm is only 45mm right?) otherwise I'd go that route and combine the CR123 and the 18650s in one case..anyway I'm rambing now..if you can find a pelican case that's tall enough just get the plain foam. Drill out a template for your batteries on a pair of thin pieces of wood the same size as the foam and use it with a hot knife or hot wire cutter to cut the foam.. it's a PITA though...BTW the pelican 1050 *should* be deep enough to fit the 18650 (with a whoping 5mm of clearance)...or lay em down and use the smaller holders to seperate the others and "nest" in the pelican

Thanks for the link! I just bought this:

That's because the summer is near and you will always find me sitting in a bar right in the middle of the pool.

With this, I can even take my GG and stuff around my neck for scuba diving!

 

[imeothanasis]

Thanks for the link! I just bought this:

That's because the summer is near and you will always find me sitting in a bar right in the middle of the pool.

With this, I can even take my GG and stuff around my neck for scuba diving!

Ooooooooooooooo, I was thinking how I can make a water proof GG but no reason now Mist!!!

 

[Mist_Of_Joye]

Hahaha....Yes it's solved now Imeo!

Don't worry...I will swim to Greece this summer and bring you "one" with me!

 

[imeothanasis]

Hahaha....Yes it's solved now Imeo!

Don't worry...I will swim to Greece this summer and bring you "one" with me!

we dont have sharks here as you know buddy so GO FOR IT!!!

 

[Lisaf01]

I know it's not what was asked for but as Stormy posted some for those that are interested outside the US and want some cheaper ones that will get to you quickly - I do these:

 

[keon718nyc]

Those are the ones i use Lisa and they are perfect and cheap

 

[wood_510]

I have a lot of the ones that you sell Lisa, but I'm trying to consolidate by batteries into fewer cases so it's easier to lug around with me. Those work great though. I like them for my batteries that I run in series. It helps to keep them paired up easier.

 

[D133]

 

[narcopathe]

Eric, for your CR123 : Hard Shell Battery Case for 12 CR123A Lithium Battery ( Titanium CR123A battery Case)

@+
Thierry