Battery contacts getting funky
- Thread starter Audio Weasel
- Start date
- th_trl_thread_readers 0
- Status
I was about to ask this very same question.
The best I can do for now, is get a Q-tip a LITTLE wet, and twirl it along the grove between the battery post and the threads, until it gets in there a bit.
It's working, but I'm sure more experienced bloogers might have a better idea?
The best I can do for now, is get a Q-tip a LITTLE wet, and twirl it along the grove between the battery post and the threads, until it gets in there a bit.
It's working, but I'm sure more experienced bloogers might have a better idea?
I just wipe them off with a paper towel from time to time. If I see build up, I use a very small screw driver to scrape it gently out of the grooves.
Ok, I feel like an idiot , but google isn't telling me anything on this subject, except what they can be used for.... but what exactly IS an "dry kitchen roll"?
The paper roll you have in the kitchen well we do in england/spain, hope this helps
One of many reasons that it is good to be a chick. Multiple org... Sorry. Not that kind of conversation.
I use an old electric toothbrush I put a lil alcohol on the bristles and get that sucker looking brand new
;-)I use a little rubbing alcohol on a tissue or paper towel to clean the battery threads; but only a slightly moistened tissue so I don't get any of the fluid into the battery. One other thing I do is use a sewing needle to make sure the two little holes on the sides of the battery threads are clear.
OK one of my batteries has just become "sluggish". I can no longer happily vape lazily I have to really work on the draw to get it to activate and produce. Did the alcohol cleaning thing but still the same. My other batteries behave properly on use with the same cartos. Also tried manipulating the battery post. Still happy with the product but we have to come up with solutions for these little setbacks. Any ideas out there?
Nedley, is this occurring with multiple cartos? I sometimes experience this when a carto is clogged or I over filled it. Not saying that is the cause. Just asking so we can eliminate causes.
Thanks.
If you look at the two little holes on the battery just below the threads, are they perfectly clear and open? Works best if you use a light to see through them. When I experience what you are talking about inevitably I see something blocking or partially blocking one or both of the holes.
If you look at the two little holes on the battery just below the threads, are they perfectly clear and open? Works best if you use a light to see through them. When I experience what you are talking about inevitably I see something blocking or partially blocking one or both of the holes.
- Status
