Bauway LR 510 Attys

[OmahaVapor]

Also ordered 1 Bauway LR yesterday based on this review. I had given up on LR attys and was contemplating selling some of my 3.7V mods because I love 5V so much. Also ordered some SLB 510s previously and I didn't like them, so I got the Bauway regular atty to try also. I also got a 2.5 ohm atty from another site, just so I can try out a bunch of different attys before giving up on the 3.7.

Dont give up on 3.7V yet. I think you will like the Bauway LR's. I use them on my mini VapeStack and they are the best LR's I have tried. I have bought LR's from 2 other places. They are perfect at 1.7 - 1.8ohm. IMO the 1.5ohms are a little to low and from my experience they dont last as long as these do. I am with you about the 5V but I also love 6V and 7.4V.

 

[greenie]

Drip tips are the only way to vape

Can you say more about the drip tips? I saw them on the site but still not sure on how they make the vape better.

Thanks in advance!

 

[lotus14]

Can you say more about the drip tips? I saw them on the site but still not sure on how they make the vape better.

Thanks in advance!

1) They make dripping easier. Just put the drops in, tap the side so it all goes down, and vape! I got tired of cart fillers a long time ago. They aren't very practical for HV or LR vaping anyway.

2) If I'm going somewhere it's impractical to drip or vape much I use a cartomizer at HV. Keeps the vapor and the carto cooler so I don't burn my lips. Easier than the end caps to pop off and add more liquid if needed to keep the filler wet and avoid burning.

3) They're much easier to clean - no dis-assembly required. I just slide a q-tip in, don't even have to take 'em off the atty. Of course you can also pop 'em off and rinse 'em out if you want.

4) Whether using cart fillers or dripping, regular carts have small channels where the vapor condenses, eventually leading to liquid in the mouth. Then you have to take the cart apart, clean the little parts and dry them. Not a problem with a drip tip.

5) Drip tips (I use the delrin ones) are more comfortable to use than either round, flat, or whistle tips IMO.

 

[greenie]

ahh I see! Thank you!

 

[LUVMY901]

(btw, they are a bit wide, and my carts slip out really easily, I found a little slip of paper makes a working gasket though.)

I got some regular Bauway's with the same problem, but a 901 cart works great.

 

[jasezero]

I got some regular Bauway's with the same problem, but a 901 cart works great.

That's interesting since my 901 carts are a bit loose on the bauway LR attys

 

[misterD]

dude!!! it's in EL PASO- TEXAS????? is it coming from mexico???8-o

 

[hoogie76]

Somehow it went via San Fran, to El Paso and hopefully will make it to Charlotte tomorrow

 

[misterD]

yeah! yeah! you hired come coyotes! thats what you've done!

 

[AaronB]

Any more/other opinions/reviews on the 510 1.7 - 1.8ohm. lr atties? I have tried the 1.5 and the 2.0 so far and waiting on some $ and a few more reviews on these before I try.

The 1.5's for me had were excellent but seem unreliable and die too quickly.... The 2.0's I have I stocked up on unfortunately and just seem to keep going haven't had one die yet but production appears only slightly better than a standard atty to me. These 1.7/1.8's appear to be promising.

 

[Orion]

Any more/other opinions/reviews on the 510 1.7 - 1.8ohm. lr atties? I have tried the 1.5 and the 2.0 so far and waiting on some $ and a few more reviews on these before I try.

The 1.5's for me had were excellent but seem unreliable and die too quickly.... The 2.0's I have I stocked up on unfortunately and just seem to keep going haven't had one die yet but production appears only slightly better than a standard atty to me. These 1.7/1.8's appear to be promising.

I've been using mine since 5/13 and 10 days later still going strong. I have some LR's from another company (they claim there's to be 1.6OHM +/-0.1 ohm) not sure what they're actually running at because I haven't tested them. By comparing the two, MadVapes LR's produce better vapor, have a nicer smoother draw, plus a decent throat hit if that makes sense & don't kill flavor like the other ones do.

I'll definitely hang on to the others for backups, but I plan on buying a few more from MadVapes too (and getting an 801 LR too )

 

[jasezero]

What carts are everyone using? The 510 and 901 carts I have are too loose and don't wick properly.

 

[N00bx7]

How is the flavor with the 1.7. I have issues tasting a 3.7 with norm atty yet the flavor seems to pop more for me on my pt with the 2 amp wall plug.

 

[Orion]

What carts are everyone using? The 510 and 901 carts I have are too loose and don't wick properly.

Personally, I don't use carts, but that's just my preference, I drip. But I also had the loose tips thing going on. My brother gave me a brownish colored whistle tip for a 901 and it fits perfectly.

Before, I'd be vaping and pull my PV away and end up with the tip in my mouth (standard 510 round tip).

@Noobx7: I personally like these LR's they don't burn the liquid & they haven't diminshed taste. But I mix my own flavors and control how much flavor I need. I'll have to give it a try with madvapes juice and see. BRB!

 

[Orion]

OK, just tried Top Vapor Very Berry and it taste the same in a my 5v passthru and my LR atty, and it taste a little weaker in my 3.7 with a regular 510.

 

[Orion]

Somehow it went via San Fran, to El Paso and hopefully will make it to Charlotte tomorrow

Are they here yet?

....now?

.....how about now?

 

[hoogie76]

The shipping challenges of the last week have been brutal.. After these were reshipped they went on tour with Elvis I think:

• Foreign Acceptance, May 19, 2010, 3:48 pm
• Foreign International Dispatch, May 19, 2010, 9:04 pm, SHENZHEN EMS, CHINA PEOPLES REP
• Inbound International Arrival, May 21, 2010, 1:14 am, ISC SAN FRANCISCO (USPS)
• Inbound Into Customs
• Inbound Out of Customs, May 21, 2010, 2:21 pm
• Processed through Sort Facility, May 22, 2010, 8:24 pm, EL PASO, TX 79910
• Arrival at Post Office, May 25, 2010, 12:41 am, EL PASO, TX 79910
• Processed through Sort Facility, May 25, 2010, 12:42 am, EL PASO, TX 79910
• Missent, May 25, 2010, 5:19 am

 

[Orion]

The shipping challenges of the last week have been brutal.. After these were reshipped they went on tour with Elvis I think:

• Foreign Acceptance, May 19, 2010, 3:48 pm
• Foreign International Dispatch, May 19, 2010, 9:04 pm, SHENZHEN EMS, CHINA PEOPLES REP
• Inbound International Arrival, May 21, 2010, 1:14 am, ISC SAN FRANCISCO (USPS)
• Inbound Into Customs
• Inbound Out of Customs, May 21, 2010, 2:21 pm
• Processed through Sort Facility, May 22, 2010, 8:24 pm, EL PASO, TX 79910
• Arrival at Post Office, May 25, 2010, 12:41 am, EL PASO, TX 79910
• Processed through Sort Facility, May 25, 2010, 12:42 am, EL PASO, TX 79910
• Missent, May 25, 2010, 5:19 am

good ole' usps, lol.

hope your shipping luck changes for the better

and now I wanna give you a big fat hug for all the problems

 

[Esmoking-NY]

I fried my last LR atty today it's getting rough. Using regular 510 atties now not the same.

 

[hoogie76]

The latest update:

Processed through Sort Facility, May 25, 2010, 4:10 pm, LAS CRUCES, NM 88001

wtf??