Best atty for dripping?

[LynGBH]

I've been trying to drip with a standard (not LR) 501 atty, but it seems to run a bit hot and I seem to miss the bridge on a regular basis. What atomizer model is the best all around choice for dripping?

 

[doots]

any atty can be used for dripping with good results.

you dont have to hit the bridge directly. just get as close to it as you can.

I always use 3 drops and vape 5 or 6 hits and then repeat.

 

[LynGBH]

Thanks for replying!

I'm aware that any atomizer can be used, but I was wondering if there were any preferred models.

 

[VPDownunder]

LR 306 for 3.4v -3.7v or reg 306 for anything up to 5v

 

[PuffinStuff]

When I began vaping I used only 801 attys for dripping. I have since discovered the 510. IMO the 510 gives much better flavor. They do run a bit hot but that is one thing I like about them. Also, your pv and atty combo is also one of those things where personal preference comes in. With all of the adaptors that are available now it is much easier to try different attys. Lately, I am really liking cartomizers and have great luck with the 510 and 801 cartos. Just find a combo that you like and keep on drippin.

 

[SWestern]

The Titan 510 will always be my favorite atty for all purposes, though I do prefer to get a pair of tweezers and remove the little white threads from under the bridge.

Don't worry about hitting the bridge directly! Run over to madvapes or altsmoke and get yourself some drip tips!

 

[doots]

Thanks for replying!

I'm aware that any atomizer can be used, but I was wondering if there were any preferred models.

510 and 306's are best imo.

 

[doots]

Thanks for replying!

I'm aware that any atomizer can be used, but I was wondering if there were any preferred models.

Sorry Lyn, Didnt mean to sound short with your question...

510 and 306's are best for drippers imo.

 

[LynGBH]

The 306 atty looks perfect. Cignot has them and they work on a 501 battery, so I think I'll pick up a few and give 'em a try.

I love cartos for liquids I'm sure I like, but I'd rather not waste them, or deal with cleaning, when I want to sample new stuff. Regular carts are a PITA and messy, therefore dripping seems the way to go for this particular purpose.

I just went ahead and pulled off my drip tip and seem to be having more success with a bare naked atty. I suppose I could drip and put the tip back on if it gets too hot.

 

[LynGBH]

Sorry Lyn, Didnt mean to sound short with your question...

510 and 306's are best for drippers imo.

I didn't think you were being short at all! I appreciate the help. I'm a noob dork.

 

[doots]

The 306 atty looks perfect. Cignot has them and they work on a 501 battery, so I think I'll pick up a few and give 'em a try.

I love cartos for liquids I'm sure I like, but I'd rather not waste them, or deal with cleaning, when I want to sample new stuff. Regular carts are a PITA and messy, therefore dripping seems the way to go for this particular purpose.

I just went ahead and pulled off my drip tip and seem to be having more success with a bare naked atty. I suppose I could drip and put the tip back on if it gets too hot.

If you are using a 510 you can drill out that plastic end where the hole is and make you own drip tip. it works. take the filler out if there is any first of course.

 

[CaptJay]

Ive used both 510s and 901s to drip successfully and no I dont hit the bridge every time but most of the time (i'm quite good! lol) but it doesnt matter if some misses; at leat it doesn't SEEM to matter to my atties
The 510s do run hotter than the 901s but thats typical - I dont have any 510s that ever ran cool lol.

 

[lasttango]

Make sure you blow that atty out regularly.

I prefer dripping in to regular than LR's... prefer a 901

 

[kgeiger002]

any atty can be used for dripping with good results.

you dont have to hit the bridge directly. just get as close to it as you can.

I always use 3 drops and vape 5 or 6 hits and then repeat.

I guess vaping habits are different. 3 drops usually gives me about 8 to 10 hits on my EGO.

 

[Xanax]

I use a 510 LR for dripping and it seems to improve the life expectancy by a lot. (as opposed to using them with carts)

 

[nelly81]

yeh i agree, i also use the LR to drip but i compensate the extra power it consumes with a 900mAh eGo Batt

 

[gashin]

510lr!!!!!!!!!!!!!!!!!!!!!!

 

[nelly81]

306Lr on the ego ftw

 

[Camp43]

If you are going to use the 306 for dripping do yourself a favor go on over to Avid Vaper : Electronic Cigarettes, E-Liquid and Accessories and get yourself a couple of Cisco LR306 atomizers. They cost a bit more, but they are worth every penny. They just perform better than any other 306 atty and, if treated right, will last longer also.

 

[JohnG1975]

510 standard attys for my 510 mega batts. De-bridged and de-wicked. Lots of flavor and vapor. Really satisfying, works great on my 10440 mini mod too.

LR306 (Cisco branded) on my Mega Riva 1300mAh. Hot and lots of vapor. I go through juice quick, and find certain eJuices don't taste good on the LR306.