Best BF RDA for Vandy Vape Pulse 80W Box Mod

Status
Not open for further replies.

VincentV

Unregistered Supplier
ECF Veteran
Jan 11, 2017
1,829
254
39
www.vaporl.com
Best BF rda for Vandy vape Pulse 80W mod
Hey, guys, nice to see you again. As we know, the Vandy Vape Pulse 80w Mod is so hot recently, today, we'll list the best BF RDA for Vandy Vape Pulse 80W Box Mod. Now, let's begin.

Vandy Vape Pulse 80W Box Mod
pulse_bf_gene_mod_.jpg

The Vandy Vape Pulse BF 80W Box Mod was designed by Youtube Reviewer Tony B. and is one of the most highly sought after vaping devices of 2018. The Pulse BF 80W Box Mod is constructed of lightweight Nylon and ABS and features a compact and ergonomic design. The Pulse BF 80W Box Mod features full temperature control functionality with multiple on-board safety protections. The 8ml food grade silicone squonk bottle and battery are encased behind two magnetic battery panels for accessibility and can be interchanged with different colored battery panels to personalize your device. By utilizing the included 18650 battery adaptor, users can choose to use either a single 18650 or 20700 battery to power the device. Click to see more information about Vandy Vape Pulse 80W Box Mod

Vandy Vape Berserker MTL RDA Tank
1-1P226112200O7.gif

Vandy Vape Berserker series added a new RDA- Berserker MTL RDA. It integrats a single coil with the replaceable airflow tubes to create a tighter hit experience for Mouth-to-Lung vape users. This RDA comes with high-quality stainless steel construction and provides real cigarette inhaling experience. It features small deck build which has a lot of opportunities of blowing of the coil. You can enjoy different flavor and taste. It also has big capacity and big complete set. It is compatible with Squonk mods.

Features:
Stainless steel construction
Available also in cerakoted black, gold and rainbow
Four PEEK airflow inserts
Side airflow control, bottom central airflow
Dual post build deck and single coil configuration
Comes with 22mm mod and 24mm beauty rings
Heat-sink driptip with delrin and PEI tips
18.1mm overall diameter

Click to order Vandy Vape Berserker MTL RDA Tank

WOTOFO NUDGE RDA 24 Tank Atomizer
r-081_24-7.jpg

The WOTOFO Nudge 24mm RDA was designed by YouTube Reviewer Suck My Mod and features a user-friendly staggered Z-Post deck with squonk mod compatibility. The Nudge RDA’s Z-Post deck features a 4 post design with an elevated center post to increase E-Juice capacity inside the deck. In addition, the Nudge RDA integrates a centrally located bifunctional E-Juice splitter that evenly distributes bottom fed E-Juice as well as traditional redrips through the drip tip or with the top cap removed. The Nudge RDA’s compact chamber combined with its concentrated airflow design makes the Nudge RDA an excellent choice for those seeking robust flavor.

Features:
Compatible with both 810 drip tip and 510 drip tip (drip tip sold separately)
Staggered Z design posts & 2 side-airflow slots, easy to build
Replaceable pin to ensure the tank works on squonk mod as well
Peek insulator
Gold plated 510 pin for better electricity conductivity
510 threading connection
24mm overall diameter

Click to order Wotofo Nudge RDA 24 Tank Atomizer

Hellvape Dead Rabbit RDA Tank Atomizer
810101_3__1.jpg

Designed by Heathen, the Dead Rabbit RDA has a unique top terminal four post build deck, which offers ample building space and takes the guesswork out of pre-cutting coil leads. Top side diagonal adjustable airflow focuses on flavor and minimizes leaking. A gold-plated positive post, knurled grip and bottom feeding pin all contribute to an advanced vaping experience. The 24mm Dead Rabbit is a good choice for builders and squonkers alike. 2 colors for the picking.

Specs & Features
A Vapin' Heathen Project
24m Diameter
Deep Juice Well
Superior Stainless Steel Construction
Elevated Postless, Quad Terminal Design
2.5mm Terminal Openings
Side-Secured via Slotted or Hex Flathead Screws
Gold-Plated Positive Posts
PEEK Insulated Block
Single or Dual Coil Configurations
Dual Slotted Top-Side Airslots - Diagonal Orientation
810 17mm Wide Resin Drip Tip
810 16mm Wide Delrin Drip Tip
510 Drip Tip Adapter
Squonk-Ready Bottom-Feeding 510 Pin
Gold-Plated 510 Contact Pin

Click to order Hellvape Dead Rabbit RDA Tank Atomizer

Augvape Templar RDA Tank
augvape-1.jpg

The Augvape Templar RDA is a 24mm low profile flavor chasing RDA that comes with many impressive features. The build deck adopts innovative Velocity Clamp System, which makes building very easy like Velocity deck but without needing to bend the coil. There is only a big titanium screw on top of the post, and the insulator is made of Zirconium dioxide, which is the top high-temperature resistant materials worldwide, corrosion-resistant, anti-oxidant, high hardness, non-volatile and no pollution. The whole deck is 24K gold plated for great conductivity. There are 6 airslots on both sides of top cap and you can get 3 layers of airflow by adjusting the internal cap. A frosted bullet shaped top cap is included, which can bring smooth side airflow (non-adjustable).

Features:
1. Velocity clamp system, easy to build for beginners
2. Triple level adjustable airflow control
3. Pre-installed with solid 510 pin. BF pin included for squonk mods
4. Extra frosted bullet cap included
5. Dual post build deck with Ultem single coil chamber reducer

Click to order Augvape Templar RDA Tank
 

VincentV

Unregistered Supplier
ECF Veteran
Jan 11, 2017
1,829
254
39
www.vaporl.com
Digiflavor Drop Solo RDA Tank
35425871_821230721399912_5056009958680690688_n__.jpg

Designed by the Brian from The Vapor Chronicles, the Digiflavor DROP SOLO RDA is right here for you! The DROP SOLO RDA adopts two large post holes for easy single coil installation. The huge holes also provide maximum building space with open access to trim excess away. The stepped airflow design provides precise control while maintaining an ultra smooth and whistle free experience. The 5mm deep and spacious juice well holds more e-liquid without leaking too. The DROP SOLO RDA comes with a standard 510 pin and BF pin for squonk MODs as well. Hold this delicate device for an amazing vape!

Specs

Size: 22x24mm (Stainless cap), 22×22.5 (PMMA Cap), plus beauty ring to make the base 24mm diameter.
2xtop cap – stainless and transparent
5mm deep juice well
Stepped airflow adjustment
2 post single coil deck

Click to buy Digiflavor Drop Solo RDA Tank

Hellvape DROP DEAD RDA Tank Atomizer
drop11_.jpg

The Hellvape DROP DEAD RDA Tank Atomizer is a collaboration between The Vapor Chronicles, the makers of the Drop RDA and Hellvape x Heathen. Measures in 24mm diameter, the Hellvape DROP DEAD RDA features 4 large post holes allowing for easy coil placement, and maximum build space with easy access to trim coil legs after installation. The Intelligently designed downward sloping airflow with 14 air holes in two horizontal rows provides precise control while maintaining an ultra smooth, flavorful and whistle free experience. Purging is also possible without vapor hitting the users face. With adjustable airflow system(tightest setting to widest), this DROP DEAD RDA is perfect for those who enjoy restricted vaping restricted or like the airflow wide open. Including Unique two piece stainless steel 810 drip tip with included threaded replaceable acrylic tips. More infor will come soon..

Drop Dead RDA Comes with :

24mm Drop Dead RDA With Colorful Resin Drip Tip
Black 810 Drip Tip
Raised BF squonk 510 pin
Stainless Steel 510 Adapter
4 x Philips Head Post Screws
Spare O-ring
Slotted Head Screwdriver
Philips Head Screwdriver
Hex Screwdriver
Drop Dead Sticker

Click to see more detail about Hellvape DROP DEAD RDA Tank Atomizer
 
Status
Not open for further replies.

Users who are viewing this thread