RDA Best budget RDA?

Status
Not open for further replies.

Deadkaiser

Senior Member
ECF Veteran
May 14, 2015
249
154
yer you would have thought so but both the review I saw they only install one coil and they were rather positive the only downside they thought there was was the tiny holes on the older version you actually might like them and might want to search for one. I'm personally a 90% mouth to lung guy how ever when i saw this for $12 as i was buying a whole lot a juice from MBV to try i thought this would be the perfect thing to try new flavours. Also i figure i can always just restrict it with a single figure if there was to much air. That all said i would be surprise if one of those clones are not better as there legit version retail for tons there must be some reason they cost so much like they have actual air control.




Igo W+ defiantly looks like a decent functional rda but if i was to buy something again i would probably have a hard look at some of the clones recommended above that said rda are designed generally for cloud chases so a tight airflow at a cheap price might be asking to much!

That is a massive image lol
 
Last edited:
  • Like
Reactions: smacuser

Hitcat44

mere Pawn in Game of Life
ECF Veteran
Verified Member
Jun 9, 2015
1,447
4,184
Ft. Vape-WKY
Agree on the Magma design RDAs. Simple, easy to build on, durable, great airflow with minimal leakage. I would caution on and advise to pay a tad more to get a quality Clone made by Infinite. Seen many others, actually bought one once that was supposed to be an Infinite which turned out to be a cheap Clone of the Infinite Clone on ebay, that are cheaply made and quickly self-destruct. Such as the Neg Pins wobble around and out due to not tight enough tolerance on Press-fit Milling. The Center Pin breaks. The supposed PEEK Material is cheap and ends up frying out to nothing quickly. Threading strips out on the 3rd or 4th build. Etc.
Even in Clones,,,, There are Cheap and there are Good.
However, rarely do you find one both Cheap & truly Good. I never have anyways.

Personally, would rather pay around $50-$60 and get an awesome Authentic or Quality Clone of a High-End Authentic that will out-last & out-perform most any Clone.
Pay $60 once?
or,
Pay $20-$30 several times long before the $60 Investment ever ceases to satisfy and perform much less wear out?
 
  • Like
Reactions: smacuser

smacuser

Total Member
Supporting Member
ECF Veteran
Verified Member
Contest Winner!
  • Jan 22, 2012
    9,390
    28,137
    Vape Hartwell, GA
    Personally, would rather pay around $50-$60 and get an awesome Authentic or Quality Clone of a High-End Authentic that will out-last & out-perform most any Clone.
    Pay $60 once?
    or,
    Pay $20-$30 several times long before the $60 Investment ever ceases to satisfy and perform much less wear out?

    I hear what you're saying, but it's a ratio thing. To date, I've yet to spend over $40 on a battery mod.

    At this point, after doing a bunch of reading, I'm liking the looks of the Freakshow Mini.
     
    Last edited:

    Deadkaiser

    Senior Member
    ECF Veteran
    May 14, 2015
    249
    154
    look i've never bought an RDA before but for the best part they really look about as complex as 3 screw a nut and washer so to suggest that on a physical level they are worth $40+ seems a little silly to me. I understand that you are fundamentally supporting the theft of intellectual properties by Chinese companies but when in come to the physical RDA there both SS and only one of the two have 100's of people saying it is of a decent quality (it would not surprise me if Fasttech deleted negative reviews, but they don't seem to). So yer I don't buy it that there is that much of a quality difference and I would be surprised if my clone did not at least function well, even if it had some medium quality threading honestly when it comes to cheap v expensive they both seem to have a similar failure rating in my life!

    Also I really don't understand the disdain at the duplication of logo fraud v intellectual property theft is one really worse than the other? or are we irritated because we might get ripped off when trying to buy an Authentic item?
     

    mr.fabe

    Super Member
    ECF Veteran
    Verified Member
    Apr 2, 2014
    358
    265
    Southern Cal
    look i've never bought an RDA before but for the best part they really look about as complex as 3 screw a nut and washer so to suggest that on a physical level they are worth $40+ seems a little silly to me. I understand that you are fundamentally supporting the theft of intellectual properties by Chinese companies but when in come to the physical RDA there both SS and only one of the two have 100's of people saying it is of a decent quality (it would not surprise me if Fasttech deleted negative reviews, but they don't seem to). So yer I don't buy it that there is that much of a quality difference and I would be surprised if my clone did not at least function well, even if it had some medium quality threading honestly when it comes to cheap v expensive they both seem to have a similar failure rating in my life!

    Also I really don't understand the disdain at the duplication of logo fraud v intellectual property theft is one really worse than the other? or are we irritated because we might get ripped off when trying to buy an Authentic item?

    smacuser is favoring the Freakshow Mini by Wotofo and that is an authentic, not a clone. It just happens to be reasonably priced at around $22...

    szwn6b.jpg
     

    Hitcat44

    mere Pawn in Game of Life
    ECF Veteran
    Verified Member
    Jun 9, 2015
    1,447
    4,184
    Ft. Vape-WKY
    look i've never bought an RDA before but for the best part they really look about as complex as 3 screw a nut and washer so to suggest that on a physical level they are worth $40+ seems a little silly to me. I understand that you are fundamentally supporting the theft of intellectual properties by Chinese companies but when in come to the physical RDA there both SS and only one of the two have 100's of people saying it is of a decent quality (it would not surprise me if Fasttech deleted negative reviews, but they don't seem to). So yer I don't buy it that there is that much of a quality difference and I would be surprised if my clone did not at least function well, even if it had some medium quality threading honestly when it comes to cheap v expensive they both seem to have a similar failure rating in my life!

    Also I really don't understand the disdain at the duplication of logo fraud v intellectual property theft is one really worse than the other? or are we irritated because we might get ripped off when trying to buy an Authentic item?

    From all "that",,, I take it you have no knowledge or experience in Metallurgy, Design, or Machining.
    As for Intellectual Theft, that exists with Everything and Everywhere on some level or another as rarely is Anything truly "All New" especially in the Vape Industry.
    If $40 is all you can or are prepared to spend on your Stuff, cool for you and rock on. However, to say that those of us who can and do are Silly is,,, well, Silly and unfounded.
    Also, just because an RDA, or anything for that matter, can be somehow financially justified as Adequate or Satisfactory does not factually equate to it being Quality or "good" by any means.
    Again, to each his/her own. We all just sharing experiences and Intel here. Up to the individual to decide how that all fits with them personally and then decide which direction to take based on their own needs, desires, and limitations.
    It's All Good.

    P.s. You say you have never bought an RDA yourself (therefore have zero experience with them). That in and of itself speaks Volumes in regards to this Thread and the Discussion therein. Hopefully, the experiences and findings of those of us who actually have here and elsewhere on ECF will help you make an Informed and Intelligent decision when and if you ever do. Same as such did for me over 2 years ago when I decided I needed and wanted more form Vaping.
    I also have spent many a Twenty during the first Stages of the Journey and although that investment yielded returns that were adequate in function, still finding myself and my situation lacking and wanting more & better. Just trying to possibly help someone else not repeat those cumulatively expensive and frustrating Lessons learned in route to where I am now.
    Obviously you are free to choose for yourself and all the best to you.
     
    Last edited:

    Deadkaiser

    Senior Member
    ECF Veteran
    May 14, 2015
    249
    154
    wow that was sharp....

    I never called you silly, all it tried to say was i personally doubted that it costed much to produce a high quality basic RDA....... In the same way the Monalisa on physical materials level is not of great value as its a bit of paint and canvas that's not to say its not worth however million people say it is worth! - I agree i poorly worded the initial statement... But tell me my condescending friend from the person with a knowledge and experience in in Metallurgy, Design, Machining what is the cost of production on a decent scale of a popular RDA. (not the value).

    Also you missed the point about intellectual thief v's fraud, Chinese produces often do both however recently i've seen a lot of people state saying that they don't mind intellectual thief so long as it is not fraudulent as well (ie coping and making a clone v's making it look physical 100% the same brand and all as and Authentic) I personally think that is rather hypocritical But each to there own...... Also there is a notable difference between intellectual theft and using aspects of another persons idea/design. They are two completely different things.......

    Any way OP hope the Freakshow is awesome sorry for taking this thread way of the rails
     

    LobsterGoD

    Senior Member
    ECF Veteran
    Sep 25, 2009
    152
    83
    I hear what you're saying, but it's a ratio thing. To date, I've yet to spend over $40 on a mod.

    At this point, after doing a bunch of reading, I'm liking the looks of the Freakshow Mini.
    go ahead and get it, i cant praise that little flavor monster highly enough. It can also produce some pretty decent clouds.
     
    • Like
    Reactions: smacuser
    Status
    Not open for further replies.

    Users who are viewing this thread