Best long lasting batteries

[Boden]

Triple parallel 2.5 mm 8 wraps single coil came in at 1.1 ohms, time to wrap the 2nd one mount them up and give it a fire.

I'm curious to see what you think about it.

Wait a second... Is that using 28awg?

 

[Wraith504]

I'm curious to see what you think about it.

Wait a second... Is that using 28awg?

yes

 

[Boden]

A 8 wrap triple 2.5 should be around 0.5ohms.

 

[Wraith504]

A 8 wrap 2.5 should be around 0.5ohms.

1.1 on one of my dmm

 

[Boden]

Coil wrapping | Steam Engine | free vaping calculators

 

[Wraith504]

Coil wrapping | Steam Engine | free vaping calculators

All I know is i just wrapped it and measured it and its 1.1

 

[Boden]

1.1 on one of my dmm

Did you calibrate the DMM to account for the test leads resistance?

 

[Boden]

Sorry if these are noob questions but something is amiss.

 

[Wraith504]

Sorry if these are noob questions but something is amiss.

I did , .1 internal on the fluke, but i realize my mistake... I measured a different coil that is laying in the pile on the workspace.

 

[Wraith504]

.48 is the correct measurement i got.

 

[Hans Wermhat]

I gave a parallel coil a try this weekend. 2 strand, 28G KA1, 8 wrap @ 3mm .64 ohm. I'm somewhat underwhelmed. Was expecting bigger clouds from that much surface area, and the flavor isn't so great. It could be the atty though. I put it in my Plume Veil. I guess maybe I need more airflow? Running it @ 50W because it gets too hot and dry hits at anything higher.

 

[Boden]

I gave a parallel coil a try this weekend. 2 strand, 28G KA1, 8 wrap @ 3mm .64 ohm. I'm somewhat underwhelmed. Was expecting bigger clouds from that much surface area, and the flavor isn't so great. It could be the atty though. I put it in my Plume Veil. I guess maybe I need more airflow? Running it @ 50W because it gets too hot and dry hits at anything higher.

A 3mm coil needs a lot if air coming through a very large air port.

 

[Wraith504]

A 3mm coil needs a lot if air coming through a very large air port.

2ND THIS! Not so great in my plume veil, muchhhhh better in my mutation x

 

[Hans Wermhat]

I was going to put it in my CLT, but I just couldn't bring myself to pull the claptons out of it.. Lol! Looks like a good excuse to buy a new cloud chasing atty.

 

[Wraith504]

ok its .24 triple parallel 28awg 2.5mm 8 wraps

 

[Wraith504]

Vapes beautifully at 70w so far