Best upgrade for the Ego?

[LightItUp]

Well I have had my t-rex(ego knockoff) for 2 weeks now and it works flawlessly. I cant complain about battery life as it seems to last atleast 10 hours for me. After 2 weeks of vaping on the t-rex and normal 510 atty is the next logical step a LR 510 atty or a 306 atty or a LR 306 atty? I just want more smoke

Ive thought about the higher voltage mods but as it seems to me most of these mods have resistors in them. So why have a higher voltage mod "dumbed down" with a resistor for an atomizer when you can have a LR atty. Just seems to make more sense.

thanks

 

[reeftivo]

LR 1.5 ohm atty!

I only like the geniune Joye LRs.

SLB LR's dont last as long for me.

I vape heavy so I get about 3 weeks from my LRs but keep them very wet.

You will chew up battery life faster with the LR attys. The vapor is more intense with LR but you may want to try VG based juice first if it's more vapor you're looking for.

$50 bucks you could pick up a Wet Box (w/o battery)

Almost as much vapor as my Silver Bullet and Precious L. Even with a cartomizer!

 

[LightItUp]

ive tried VG juice and I am still looking for more. Your statement of 3 weeks is precisely why I was thinking of a LR 306 atty. People claim these last much longer than a LR510 and produce the same if not more vapor.

 

[yoyoma_mda]

very few mods have resistors in them, probably 4 at most that are still in production. regardless the reason to get a hv mod IMO is for use with cartomizers and HV atties. LR atties tend to die in a week, sometimes 2 days, whereas i average 1-3 months on cartomizers and atties. To each their own

 

[TWolf]

Might want to look into a cheap 5v passthru to see if you like higher voltage. The LR atty simulates 5v (more like 4.5 to me), but IMHO there's a difference in the vape.

 

[skullfreak]

Well I have had my t-rex(ego knockoff) for 2 weeks now and it works flawlessly. I cant complain about battery life as it seems to last atleast 10 hours for me. After 2 weeks of vaping on the t-rex and normal 510 atty is the next logical step a LR 510 atty or a 306 atty or a LR 306 atty? I just want more smoke

Ive thought about the higher voltage mods but as it seems to me most of these mods have resistors in them. So why have a higher voltage mod "dumbed down" with a resistor for an atomizer when you can have a LR atty. Just seems to make more sense.

thanks

i have a trex also and love it so far.....

 

[LightItUp]

what cheap 5v mod passthrough can I do on the t-rex/ego ?
I dont have the baby j battery so how can I Mod the ego with a passthrough?

 

[Nomoreash]

I got my 5v passthrough from madvapes. The one linked below. If you're going with a 5v passthough be sure to also get an adapter like the one below or similar which has at least 2amp output. Using a 5v passthorugh on a computer can overstress the motherboard and possibly cause damage. Plus with the adapter you can use it anywhere there's an ac outlet and don't have to be tied to a computer

MadVapes 5 Volt 510 Manual USB Passthrough

2 amp AC to USB Adapter, ideal for Passthroughs

 

[B-Rad_The_Mad_Vapr]

New feeder system for ego, Imeo sold his rights to this guy for mini AVS system

 

[t9c]

Agree with the LR306 suggestion, although I don't find it has more vapor production that the LR510's I've used, but it sure does have better flavor production and I have yet to flood one. In fact in needs to be kept wet to keep working. As good as it gets for dripping or juice feeders.

 

[Robert T]

I would say try a Cisco 306 LR atty and a drip tip and try dripping. Great vapor and taste. That's what I use on a 900 mAh batt (EGO) and my Silver Bullet. Works Great!