BEST UWELL CROWN SETTING

[Staticoco]

hello. i am currently using uwell CROWN (black edition) so far i am using 0.25ohm dual coil wrap.

when i am using 60W, i wont get any dry hit. once i reach about 70 to 80W, i cant pull longer. if i pull longer i feel dry hit. why is that so? for 60W i have no problem. no matter how i pull. there wont be any dry hit.

after 4 to 5 puff chain vaping uwell crown. the tank is super HOT!

any advice what is the best setting for 0.5ohm dual coil, 0.25ohm dual coil and a 0.5 ohm single coil rba.

thanks =)

 

[edyle]

if it's no problem at 60 watts but you get problems at 70 to 80, then 60 is the best setting.

 

[moneymike]

I'm getting great results on my dna200 with a ss304 TCR at 80w/500° with a 120w preheat. Was using it between 70-80w in power mode and I would occasionally get dry hits while chain vaping too. The preheat and TC makes a big difference imo

 

[MarshallMoore]

I started with the Ni200 because, I bought a Segelei 150w TC. I had never owned a temp control device before, so I was anxious to try it out. I never could figure out what joules setting to set it for. So after two weeks I screwed in a .25 coil and set mod to power mode, it seems to vape more to my liking. 70w is my sweet spot with the .25. Above 70w was less pleasant. Just tonight I screwed in a .5 coil and right now I am liking 60w. I believe I have experienced slightly different sweet spots in wattage with coils of the same resistance. Maybe the best solution is to just tweak your settings regularly to get the vape you like.
(Hope this helps!)

 

[STEVE S]

hello. i am currently using UWELL CROWN (black edition) so far i am using 0.25ohm dual coil wrap.


when i am using 60W, i wont get any dry hit. once i reach about 70 to 80W, i cant pull longer. if i pull longer i feel dry hit. why is that so? for 60W i have no problem. no matter how i pull. there wont be any dry hit.

after 4 to 5 puff chain vaping uwell crown. the tank is super HOT!

any advice what is the best setting for 0.5ohm dual coil, 0.25ohm dual coil and a 0.5 ohm single
I USE THE .5 OHM COIL AT 25 TO 30 WATTS ITS PERFECT ITS THE COULDN'T I USE YOU GET BIG CLOUDS VERY NICE VAPER I DONT SEE THE POINTING WHY PEOPLE USE THE BIGGER OHM COILS AND CAN THE WATTS RITE UP .5 OHM IS JUST FINE AND THE COILS LAST WAY LONGER

 

[MarshallMoore]

If 60 watts is pleasant keep it there. I said in the above post that my sweet spot for the .25 coil was 70 watts, now I'm vaping the .25 at 65. I guees I've changed my mind. I have owned and used the Crown longer now and today I personally feel that the .25 coil in power mode is my favorite. People have different opinions but my opinion today is Ni200 .15 in temp control is good, .5 in wattage mode is good, but the .25 in wattage mode is best for me. I recently purchased the new Herakles Plus, after trying it out for half a day I went back to the Crown tank. It was just better in vapor and flavor production. My advice is just vape and adjust the watts find your sweet spot and enjoy. I watch a lot of you tube reviews and I've seen those guys crank up the wattage to 120+ and say they have yet to get a dry hit. I've decided to not concern myself with all that and just go with what I like. If you, me or anybody chain vapes the tank will get hot, I guess if you really chain vape fast enough maybe it wouldn't allow enough wicking time. It would be logical that if the cotton isn't wet as it should be it would produce a dry hit.