Beta AFS tank

[wood_510]

I just wanted to hear from those who own one of the Beta tanks and see how they like them. I absolutely love mine although that's the only one I have. Nothing else to compare it to at the moment, but it still works flawlessly.... By the way if you have one that you don't like I will be more than happy to buy it from you... hehe

 

[vapn]

Love mine too. What atty and batt are you using with it Wood? At the moment my beta tank has a i7 with two 3.6v CR2s in the TS. I wish imeo would make an AFS tank just like the beta tank the same diameter as the Grant. That would be nice. hint hint hint imeo....

 

[imeothanasis]

Love mine too. What atty and batt are you using with it Wood? At the moment my beta tank has a i7 with two 3.6v CR2s in the TS. I wish imeo would make an AFS tank just like the beta tank the same diameter as the Grant. That would be nice. hint hint hint imeo....

I dont say no to this my good friend Vapn but I have so much work that I am stuck for now

 

[wood_510]

I'm using a 18650 3000mah 3.7v battery with a modified TW 901 atty. It has a filler and a small hole about an inch above the regular one. I haven't tried it at high voltage as of yet but I will soon. Does it feed good at HV?

 

[imeothanasis]

I'm using a 18650 3000mah 3.7v battery with a modified TW 901 atty. It has a filler and a small hole about an inch above the regular one. I haven't tried it at high voltage as of yet but I will soon. Does it feed good at HV?

It feels better than without AFS wood, please try it
Take harder inhales so the liquid will fill better the atty because 6 volts require more juice. If you see a burn taste then inhale 4-5 times without pushing the button to bring liquid in the atty

 

[wood_510]

Ohh I will definitely give it a go, but I want to run the juice out of the AFS rather than make a mess changing the atty before the tank is empty...lol. I love this AFS. I just hope that the v1 and v2 are as great too. I would love to have one of the beta tanks for my slims and my grant. It's so simple yet so effective.

 

[vapn]

I am confused, what atty are you using in the AFS now? The TW 901 will work quite nicely at 6v wood. The new iatties have a slightly smaller hole in them to help with flooding issues.

I use a pipette to get the juice out of my AFS tank when I need to change atties. It is real fast and you can just leave the juice in the pipette and lay it down while you work on the AFS. That is the simplest way of dealing with the juice if you need to drain it.

 

[wood_510]

It is a TW 901 atomizer. I believe the guy that I bought the beta tank from had it modified. I have other TW 901 atomizers without any filler on the inside and without the additional hole in it. I'm also assuming that they are modified because they have a burn mark around the added hole as well. I'll have to take a picture so that you can see what I am talking about.

I don't have any pipetts either. I need to buy some just for the AFS I guess...

 

[imeothanasis]

It is a TW 901 atomizer. I believe the guy that I bought the beta tank from had it modified. I have other TW 901 atomizers without any filler on the inside and without the additional hole in it. I'm also assuming that they are modified because they have a burn mark around the added hole as well. I'll have to take a picture so that you can see what I am talking about.

I don't have any pipetts either. I need to buy some just for the AFS I guess...

its my modification wood. The guy you bought it hadnt modified it, he had bought one of my first modified atties

 

[wood_510]

cool... well it is still kicking out plenty of vapor.. I don't have any extra holes in either one of my iatties.... I looked and looked but they aren't there

 

[vapn]

They are there Wood... so tiny you can barely see them. You will need to get a magnifying glass maybe or try this trick if you have a light small enough to get inside the atty with. Trust me they are there. In line with the bottom hole you will see it. Everyone said there are no holes in these and I had a hard time seeing them myself. And like imeo said those TW ones with that burn mark have been laser cut. The iAtties were laser cut before they polished them so you can't see the burn mark.

 

[wood_510]

I put a little LED pen light I use at the Fire Department in there and My I3 and I7 do have a hole but nothing in my I6. Maybe it's blocked but I can't find it. I'll look with a magnifying glass and double check

 

[sadtranz]

Like the slippers Vapn very petite

 

[vapn]

sometimes the factory puts the cart in there over the hole and a small piece of plastic gets inside the hole. I will block both of the bottom holes with my fingers and blow into the mouthpiece end to clear it out sometimes. I also have a stainless steel dental pick (The kind you see the dentist picking at your fillings with) that will go inside the hole. Some people take a sewing needle and clear out the hole. The TW atties had a larger hole and they will flood on you. That is why there was filler material in that one. You will NOT need any filler material in these iAtties. They feed very nicely with the holes down all the time.

 

[vapn]

Like the slippers Vapn very petite

 

[wood_510]

What do you mean with the holes down?? Ohhh and there is a hole in all of them.. There was some junk blocking it and I was able to get it out with a needle from my sewing kit...thanks for your help Vapn....

 

[ggero]

We have a little problem with the AFS...When we want to come much juice in the attie, we have the attie hole down...When we dont want much juice to go inside we have the hole up

 

[imeothanasis]

What do you mean with the holes down?? Ohhh and there is a hole in all of them.. There was some junk blocking it and I was able to get it out with a needle from my sewing kit...thanks for your help Vapn....

vapn means that you have to keep the hole facing on the floor wood

 

[ggero]

Basically its not a problem...Its a way to smoke like the way we want

 

[vapn]

When I say holes down I mean that you rotate the GG to get the holes into the juice. Imagine the juice inside the tank when you tilt the device. With the holes up you get no juice. Rotate the holes down and you get juice. You should really watch all the videos on Lisa's site turn up your speakers real loud so you can hear what Imeo is saying.

Video #1
Video #2
Video #3