BetterJoy - geeky, usable and open FW for Joyetech/Wismec/Eleaf devices

[BetterJoy]

May be it can be useful

It's FW with pretty informative design

GitHub - ProstoChel/BetterJoy: Better firmware for Joyetech devices: Wismec, Eleaf

Some features:
Regulated AutoFire
VaryVolt
Battery overtemp on charge protection - charge stops if board temp more than 50C (by default) //temporary disabled
Only 4 level for brightness
Everything can be tuned on the mod, no PC needed.
Games (flappy,tetris)
Realtime battery percentage - it shows battery drops
.X ohm format for less than 1 ohm resistance
realtime resistance and base(profile) resistance shows on main screen
Many other usability improvements
Quite big fonts
Online installer and history of changes

You can use online flasher where you only need press 'update button'

Download online flasher from github
Download last bin file from github

Future features:
-Regulated source of energy mode - it's not just powerbank, it can use any voltage/wattage/TC in the end or connect some devices
-Puff detection - in this mode you do not need press fire button, all you need is start to puff
-Flashlight mode
-Remember last time when battery changes
-Tune key combos
-Reset atomizer resistance (useful for TC)
-???

Controls:
Now it looks like

2xFire - Temp/Power mode in TC and VVlite (vaaryvolt - yeah, we have it) in WV
3xFire - Profiles
4xFire - Edit screen

-Fire - menu
-Fire - long press - rotate screen
-Fire - looonger - swap +- buttons (in next releases)

+Fire - stealth
+- - key lock

+-Fire (three buttons) - call brightness control
+-Fire long - call flashlight

In menu:
-Fire - go to parent menu
+- - exit from menu

 

[BetterJoy]

PS: small and middle screen has no support, but it's real.
Geeky interface will be like this

For middle screen in can be like

 

[Coastal Cowboy]

I'll download and try this tomorrow. Can't tonight but I'm interested to see what it will do.

 

[BetterJoy]

I'll download and try this tomorrow. Can't tonight but I'm interested to see what it will do.

If you find bug, write here please

 

[Coastal Cowboy]

I like how the updater recognizes the device as soon as it's connected. That was a major annoyance with NFE Tools for me.

I flashed several versions of both factory and custom firmware on two Picos and an Ikonn 220. No problems at all.

Is there a tool or utility to build custom firmwares?

I have some large simulation models to run (I'm saving a dam today) so I won't get to do any more full attention stuff until later, but so far this is very nice!

 

[BetterJoy]

Is there a tool or utility to build custom firmwares?

Let's try Russan
myevic и SME: Редактирование и компиляция открытого кода

Heay, tools for building your own dimrmware exsist, it's called source code+IDE+other stuff.

Really, it's not very difficult. But current open FW have some problem - it's only for divices with big screen (64x128). It can support smal screen and NFE Team approve that (AF based on myevic too, but they do not open sources), so... You can make anything)

 

[williamclarkonet]

i will try this

 

[williamclarkonet]

im looking forward to your firmwere updates but right now its way to buggy for my rx gen 3

 

[BetterJoy]

im looking forward to your firmwere updates but right now its way to buggy for my rx gen 3

Which bug did you cought?

 

[BetterJoy]

Ty again and reset dataflash . Should work

 

[williamclarkonet]

Ty again and reset dataflash . Should work

ok

 

[williamclarkonet]

Ty again and reset dataflash . Should work

i could not get the screen savers to work and the battery indicator all the pixels were messed up could not read it

 

[williamclarkonet]

i really like the firmwere by the way

 

[BetterJoy]

i could not get the screen savers to work and the battery indicator all the pixels were messed up could not read it

Please, provide screenshot/video.

^_^
I make FW not rightly. For exampe, I make only 1 interface, but FW has 2. U just ignore sedon or ignore it, I can ignore battery like, etc... So, stock settings should work, in another cases it could be sctrange and horribly.

 

[Belhade]

I don't know anything about programming...but would this work on the square display of a Joyetech Elitar?

 

[BetterJoy]

Try write nfeteam.org .

I do not know knowlege to make interface for different display size.

 

[BetterJoy]

May be forumchanins do not like custom FW, but I work hard on it.
Now it looks like

By the way, you can use your screen as flashlight

Changelog

220218 1:19
USB voltage in TCR mode. Test

210218 20:26
6 digit fixed.
Honestly, there is a lot of fixes which was not logged, sorry

200218 18:18
Charging icon in Amp place
Weakest bat voltage in the midle bottom
Bigger C and F icon for temp
-Fire (long) - update resistance
-+Fire (long) rotates your screen
-+Fire (longer) swap +- buttons


160218 21:12
Right resistance has 3 signs after point (base resistance)

160218 21:12
99 percent max for better viewing
2.7 volt min
Other fixes

180118 20:23
Pretty battery, board temp in the bottom.


180118 15:15
Finally, I won bug with attached USB screen had some trouble and make improved UI.

140118 1:09
Fix profiles sings in the topchik

140118 0:42
Faster keyreaction on +- buttons, but more 'stable', bigger F/C/W symbols in main line
Why reaction was sooooo sloooow?

 

[BetterJoy]

040318 23:16
New feature:
ChargeTemp Protection
You can set in settings/expert/MAX/ChT max temp when mod is charging.
If device become hotter that ChT, it just stops charge until device became colder. It protects you li-ion battery and your mod.
Default settings: 50°C
Also, there is some changes in charging screen, but it's a little glitchy, I am little lazy. Not it shows every battery percent. I wanna make clock too.

 

[BetterJoy]

Bad words are supported, 6clicks for FOff screen
A lot of small and bigger interface improvement. Font is bigger and easier to reading now. Now there is no interface freezings in TC mode

Now it's not in Github, but you can get in TG chatroom

Invite: BetterJoy

Font comparing

 

[Asbestos4004]

I'm guessing that'll get edited in 3...2...1....