Boge 306 Cartos

[Zaratoughda]

Dave... any chance you might start stocking the Boge 306 cartos?

I've tried the 510s and prefer these, though I generally prefer 306 in any case.

I use the 2.8 ohms on my 306 (for on the go) and I use the 2.0s on my ego.

Started using the 2.0s beginning of last summer and maybe go through 15 a month.

But, the suppliers I have been getting them through can't seem to keep them in stock.

Also, your prices are a bit better.

Thanks,

Z

 

[Myshkin]

I will look into this. I honestly didn't know they made 306 ones

 

[Zaratoughda]

The Boge 306 cartos are known for a 'tighter draw' compared to the 510s, and to be honest I think it is JUST because the hole in the white cap is smaller. Otherwise, they are a bit narrower and hold a wee bit less EJ (I usually get 24-30 drops in them when starting).

I saw a person posting that they 'saved his BLU' for him, and of course they are fine (the 2.8 ohmers) for Blu, Volcano, 306, etc.

The recomendation I saw on the 2.0ers, was that they should not be used on batteries having less than 450 mah. In other words, nothing with less mah than the 510 mega. So, they are for Ego users and the like who prefer the narrower mouthpiece and/or the tighter draw.

Z

 

[Myshkin]

Wanted to update you that we will start to have the 306 cartomizers online in about a week. We will have the regular and LR ones

 

[Zaratoughda]

Sounds great!

Will be looking for them here next time I need to order.

Z

 

[wolcen]

Hmmm...I haven't seen Boge 306 cartos before.

Anyway, the sale price on your Joye 306's is great! 3 for $15 shipped is pretty hard to beat unless you're willing to wait for the slow boat from China.

Thanks for the sale and quick shipment!

 

[Myshkin]

unfortunately mr customs man decided to take my cartomizer order. I am working on getting it out but that is always a uphill battle. Might be a bit before I get these on the site

 

[wolcen]

Ugh. That's never good news. Sorry to hear about that.

 

[Zaratoughda]

Dave... any word on when you might get the Boge 306 cartomizers in stock?

I just found that the 2.8ers I got from one vendor, had some of them (I found 4) that had GREEN coils, and IMO that was a bad batch from Boge but, if I order from this same vendor again, might get more from the same batch with the GREEN coils.

Found this on the 2.8ers but not on the 2.0ers, but am getting low on the 2.8ers I have.

Thanks

 

[Myshkin]

I have some in production again. I don;t think I am going to be successful getting the cartomizer order from customs, so I have just placed another order.

What is the best resistance? Which resistance do you prefer?

Dave... any word on when you might get the Boge 306 cartomizers in stock?

I just found that the 2.8ers I got from one vendor, had some of them (I found 4) that had GREEN coils, and IMO that was a bad batch from Boge but, if I order from this same vendor again, might get more from the same batch with the GREEN coils.

Found this on the 2.8ers but not on the 2.0ers, but am getting low on the 2.8ers I have.

Thanks

 

[Zaratoughda]

The 2.0ers are popular for the Ego and other similar sized ecigs, while the 2.8ers are more for like the Blue, Volcano, Joye 306, etc.

On one site they say do not use the 2.0ers on batteries less than 450 mah. I am not sure what batteries run at 450 mah but these are fine on egos which start at 650 mah.

I am still trying to use the Joye 306 as a more 'convenient' ecig, in cases where convenience and ease of use is important, and use the 2.8ers on that and, right now I have gotten low on the 2.8 cartos.

On my ego I drip (ej that does not clog up the atties) and use the 2.0ers for thicker ej, but right now I got a stock of them though long term I expect I will be buying more.

So, I guess the bottom line is the 2.0ers and 2.8ers are for different people, with the 2.0ers for those that like the 306 sized mouthpiece more than the 510 sized mouthpiece, while the 2.8ers are for those that use the minis and super-minis, cigarette sized ecigs.

Hope this helps.

 

[Myshkin]

Finally got these in and online. We got in the 2.0-2.4 and the 2.7-3.1. They are in the JOYE306 parts section. Pics will be up soon. They are $8 a pack

LINK

 

[Zaratoughda]

Ug... I had gotten to the point where I was real low on the 2.8s and went and found a new supplier (could only find one that sold the 2.8s) as I had lost confidence in the two suppliers I had been getting the 2.8s from, and just ordered 3 packs getting the 3rd one in yesterday. THEN, I check your side and you now got them in.

I have one question. Do the "2.8s" on the box say "306D Black Regular", "306D Black 3.0 Ohm", or something else? I am just curious because the one's I got from the new supplier had the "3.0 Ohm" on them and that is different from what I had been seeing. They still metered in at the same resistance (mainly 2.8 and 2.9 ohms) but seemed to be more uniform quality from what I had been getting, and so I am wondering if Boge is getting better or worse with their quality.

Oh, you might move the 2.0 ohmers to 'ego parts' as these are fine on the ego... that is what I use them on... but might present problems if used on the 306 itself due to the low resistance.

Lastly, noticed you are out of the black 306 batteries. Do you expect to be getting more in?

Thanks,

Z

 

[Myshkin]

Ours have just the 306D black on them. I wouldn't base much on this though. Ours is a newer batch and every single batch from these companies has small changes. How its labeled likely just depends on who packed the shipment.

We will try to get some black 306 batteries on our next JOYE order.

Ug... I had gotten to the point where I was real low on the 2.8s and went and found a new supplier (could only find one that sold the 2.8s) as I had lost confidence in the two suppliers I had been getting the 2.8s from, and just ordered 3 packs getting the 3rd one in yesterday. THEN, I check your side and you now got them in.

I have one question. Do the "2.8s" on the box say "306D Black Regular", "306D Black 3.0 Ohm", or something else? I am just curious because the one's I got from the new supplier had the "3.0 Ohm" on them and that is different from what I had been seeing. They still metered in at the same resistance (mainly 2.8 and 2.9 ohms) but seemed to be more uniform quality from what I had been getting, and so I am wondering if Boge is getting better or worse with their quality.

Oh, you might move the 2.0 ohmers to 'ego parts' as these are fine on the ego... that is what I use them on... but might present problems if used on the 306 itself due to the low resistance.

Lastly, noticed you are out of the black 306 batteries. Do you expect to be getting more in?

Thanks,

Z

 

[Myshkin]

306 black/blue batts are back in stock