Boge 510 LR 2.0 Ohm Cartomizer

Status
Not open for further replies.

Haploe

Senior Member
ECF Veteran
Dec 20, 2011
107
21
Florida
Ok, I keep hearing so much about the boge, I going to give them a try.
Boge 510 LR 2.0 Ohm Cartomizer

Going to get them from vapingzone.

Question is can a tip be put on these, I prefer a whistle tip but haven't found any yet for a drip tip. Not a big deal will use a round one.
Also, am I right that filling these with a needle would be better and if so does it matter what gauge? vapingzone has 5 ML Syringe with Needle.
 

The Wiz

ECF Guru
ECF Veteran
Feb 14, 2009
10,408
3,854
62
Whiskeyville USA
Haploe.........Most standard 510 drip tips will work with Boge cartos. The soft cap can be removed with a paperclip or such. I recommend using the "Condom Method"(plenty of links here on that)for re-filling. Or you can just drip into the carto when it starts to taste bad or becomes dry. That method of refill works best for me. Too much hassle using the syringe IMO!

Cheers!
:)Wiz!
 

Katya

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Feb 23, 2010
34,804
120,147
SoCal
Haploe, I can't tell from the picture what gauge that needle is or whether it's sharp or dull, so I can't help you there.

The main thing is that you fill your cartos to capacity, let the eliquid saturate the filler completely, then top off early and top off often. Since the polyfill in Boges is usually wrapped very tightly, I use a syringe and a needle (18g, sharp) to fill them for the first time. Don't eyeball it--they take a bit more then 1 ml, or ~25 drops, depending on the size of your dropper and the liquid you're using.

The problem with the plunger method described above by Wiz is that it needs to be performed correctly; if you do it too quickly, the juice will travel the path of the least resistance--the center tube--and will not penetrate the tightly packed filler. If you have to use this method, take the endcap off and plunge the carto's threaded end very slowly into the condom and watch the eliquid's progress; as soon as it begins to pool at the top of the filler, stop and let it soak in.

Happy vaping!
 
Status
Not open for further replies.

Users who are viewing this thread