Bottle/feeder-tube_o-ring_not_staying_seated_on_my_mini

[TheSneakerHoarder]

This_st00pid_bottle/feed_o-ring_wil_not_stay_seated_and_thus_will_not_allow_a_proper_sqwonk.

Is_it_dead...replace_and_fix?_Or_is_there_something_I'm_doing_wrong?

 

[Rhapsodies Fire]

You mean the o-ring in the bottle cap?

If it's not staying seated, it could be because it has swollen. To fix...you can soak in alcohol and then rinse and dry. You can also place the o-ring over the top of the bottle and use it that way. Give it a shot and keep us posted.

 

[TheSneakerHoarder]

Will_do...And_report_back.

 

[TheSneakerHoarder]

Placing_it_over_the_bottled_fixed_the_sqwonk_issue,_but_not_the_hard_draw_that_came_about_at_the_same_time.

 

[SammyT]

Try one or all of these things: loosen you atty/carto until it will just fire, just loosen it and screw down a quarter turn and keep checking if it fires. That could solve a draw issue. Swab your connector with alcohol. Blow hard through your atomizers connection. If it is a cartomizers then try a new one. I hope that helps


-Sam

 

[TheSneakerHoarder]

I_have_a_feeling_it_is_the_510_connection...The_HH357_sucks_through_just_fine_off_the_mini.

Maybe_a_build-up_of_atomic_cinnicide_is_causing_venting_issues...BOO!

 

[pmoraldo]

the problem with your oring is Atomic Cinnanide like all the Cinnamon juices it swells orings just best to replace you can get them at Home Depot or Ace hardware etc

 

[Justice]

The atomic will likely swell the gaskets in the atty hence causing it to get tight. And or your threads could be getting dirty

 

[Rhapsodies Fire]

Yep...sounds like bath time!

 

[Mudflap]

If all else fails, replace the bottle. NicNurse made a thread about it that was informative and hilarious.

 

[TheSneakerHoarder]

I'm_still_in_the_no-taste/no-smell_period_of_quitting....

Luckily,_I_have_back-up_parts...TY_for_all_responses.

 

[pianoguy]

Make sure the end of the feed tube isn't resting on the bottom of the bottle, too - that can make it hard to squonk.

 

[redeyedancer]

The old atomic juice takes out another vaper .That is some evil juice I think I could use it as a paint stripper .You can always grab a new cap tube & o ring I no a guy that has a bunch of them

 

[unsure]

The old atomic juice takes out another vaper .That is some evil juice I think I could use it as a paint stripper .You can always grab a new cap tube & o ring I no a guy that has a bunch of them

wonder who this other vapor you could possibly be speaking of...

 

[redeyedancer]

wonder who this other vapor you could possibly be speaking of...

I wonder lol

 

[TheSneakerHoarder]

The old atomic juice takes out another vaper .That is some evil juice I think I could use it as a paint stripper .You can always grab a new cap tube & o ring I no a guy that has a bunch of them

I_will_be_placing_a_parts_order_soon.

Cinnicide_is_just_SOOOOOOOOO_DA*N_GOOOOD!!!!!

 

[redeyedancer]

I_will_be_placing_a_parts_order_soon.

Cinnicide_is_just_SOOOOOOOOO_DA*N_GOOOOD!!!!!

I put 3 drops of Gil's lava juice in my atomizer it was there for 3 days .I have to admit it is a nice change up for me

 

[SammyT]

I_have_a_feeling_it_is_the_510_connection...The_HH357_sucks_through_just_fine_off_the_mini.

Maybe_a_build-up_of_atomic_cinnicide_is_causing_venting_issues...BOO!

Ooooh, I did not realize cinnicide was involved, gaskets and orings and things HATE that juice. This is not the first time I have heard of this.

 

[unsure]

Ooooh, I did not realize cinnicide was involved, gaskets and orings and things HATE that juice. This is not the first time I have heard of this.

Yep its like acid especially in the strength flavoring I use....but its soooooo worth it.

 

[murtcepS]

I use the Cinnabomb all the time. It will swell the o-ring 2X it's original size if a few weeks. If you go to refill and notice the o-ring is kinked in the bottle threads....Time to swap it out.