- Status
Hi Chrissy. To Direct Message a member you need to have been a member on here for a certain amount of time and messages sent.
There’s an icon shaped like an envelope near the top of your page. I’ll try DMing you then if you can reply to it then we’ll be all set.
Use the @Fidola13 usernamer to find that person. I’m probably the last person to be answering technical questions!
There’s an icon shaped like an envelope near the top of your page. I’ll try DMing you then if you can reply to it then we’ll be all set.
Use the @Fidola13 usernamer to find that person. I’m probably the last person to be answering technical questions!
Hi Chrissy! I was just wondering if you were interested in any other RTAs especially ones that are easy for a new builder to build?
I have several Zeus original single coil RTAs which imo is one of the best RTAs you can find.
I also have several dead rabbit v1s RTAs that are single and dual coil. Building is a bit more complicated but after you’ve done a few it’ll be easier.
I also have one Blotto Single Coil RTA left. This is another RTA that’s uncomplicated and good for noobies! They are very difficult to find unless you try the classifieds.
There is also the Blaze RTA which is very popular with new to advanced vapers.
Let me know if you’re still interested and I’ll keep looking to see what I find. I’m trying to show you either single coil or easier ones that are great for noobies.
Out of all these I’d recommend the Zues single coil. It’s a really fantastic vape and so easy to build and wick.
I don’t know if I mentioned this but I’ve always find it helpful to watch a couple of YouTube tutorials on building a particular device. I still do this even 7-8 years I’ve been vaping. You get a lot of information with these build videos.
Talk later!
I have several Zeus original single coil RTAs which imo is one of the best RTAs you can find.
I also have several dead rabbit v1s RTAs that are single and dual coil. Building is a bit more complicated but after you’ve done a few it’ll be easier.
I also have one Blotto Single Coil RTA left. This is another RTA that’s uncomplicated and good for noobies! They are very difficult to find unless you try the classifieds.
There is also the Blaze RTA which is very popular with new to advanced vapers.
Let me know if you’re still interested and I’ll keep looking to see what I find. I’m trying to show you either single coil or easier ones that are great for noobies.
Out of all these I’d recommend the Zues single coil. It’s a really fantastic vape and so easy to build and wick.
I don’t know if I mentioned this but I’ve always find it helpful to watch a couple of YouTube tutorials on building a particular device. I still do this even 7-8 years I’ve been vaping. You get a lot of information with these build videos.
Talk later!
Hi Sarah
I did receive my package today but my dead rabbit hell vape version 2 RTA is not the correct one the top is not correct I cannot open it for the air flow and it does not have the flip to open it up I would like to return it . Can you send me a kayline r t a in a sealed package.
Please let me know how to return this
Chrissy
I did receive my package today but my dead rabbit hell vape version 2 RTA is not the correct one the top is not correct I cannot open it for the air flow and it does not have the flip to open it up I would like to return it . Can you send me a kayline r t a in a sealed package.
Please let me know how to return this
Chrissy
Attachments
Hi Sarah
I did receive my package today but my dead rabbit hell vape version 2 RTA is not the correct one the top is not correct I cannot open it for the air flow and it does not have the flip to open it up I would like to return it . Can you send me a kayline r t a in a sealed package.
Please let me know how to return this
I did receive my package today but my dead rabbit hell vape version 2 RTA is not the correct one the top is not correct I cannot open it for the air flow and it does not have the flip to open it up I would like to return it . Can you send me a kayline r t a in a sealed package.
Please let me know how to return this
Attachments
Chrissy I’m so sorry if there was a mix up! Which atty was I supposed to send you? And which did you receive? Can you tell me what you mean by the top is not the correct one. Is it broken? I think it’s a screw on top cap with air flow control at the top.
Did you check out any videos for the Kylin ll to make sure it’s what you want? I want to make sure that you’ll be happy with whatever one you replace it with. I know they are very popular. The sealed Kylin ll is stainless steel. Will that work for you?
Please just keep the one you received. And I’ll just send you this one out to you tomorrow. I’ll cover the cost and shipping. I’m sorry this didn’t work out.
Since you’re keeping the dead rabbit you might want to check out a couple of YouTube build videos. You might want to use it at some point.
So I’ll get this SS Kylin ll RTA out to you in the morning! Have a great night!
sara
Did you check out any videos for the Kylin ll to make sure it’s what you want? I want to make sure that you’ll be happy with whatever one you replace it with. I know they are very popular. The sealed Kylin ll is stainless steel. Will that work for you?
Please just keep the one you received. And I’ll just send you this one out to you tomorrow. I’ll cover the cost and shipping. I’m sorry this didn’t work out.
Since you’re keeping the dead rabbit you might want to check out a couple of YouTube build videos. You might want to use it at some point.
So I’ll get this SS Kylin ll RTA out to you in the morning! Have a great night!
sara
Hi
Thank you for getting back to me so quickly. I finally took the whole deck apart and upon looking at the chamber this has already been used. I will be attaching a photo. I do want the Kylin in a sealed box please. Thank you for covering the shipping and cost and it is stainless steel that's fine. The picture shows when I looked at and cleaned the chamber this is what came out of it. It has obviously been used.
Thank you for getting back to me so quickly. I finally took the whole deck apart and upon looking at the chamber this has already been used. I will be attaching a photo. I do want the Kylin in a sealed box please. Thank you for covering the shipping and cost and it is stainless steel that's fine. The picture shows when I looked at and cleaned the chamber this is what came out of it. It has obviously been used.
Attachments
The attys I’m selling in that post were supposed to be new. I am so so sorry that a used one slipped through the cracks. This has never happened before.
If you look at my Feedback you’ll see that my transactions have all been above board.
As I said earlier please keep that atty and I will send you the Kylin ll in SS in sealed packaging on me including shipping.
If you’re not satisfied then please DM me and we’ll arrange for a different atty or I can refund your money of the atty plus the shipping.
Let me know if you would prefer a refund. That’s not a problem. Keep the Dead Rabbit either way.
Have a great night
sara
If you look at my Feedback you’ll see that my transactions have all been above board.
As I said earlier please keep that atty and I will send you the Kylin ll in SS in sealed packaging on me including shipping.
If you’re not satisfied then please DM me and we’ll arrange for a different atty or I can refund your money of the atty plus the shipping.
Let me know if you would prefer a refund. That’s not a problem. Keep the Dead Rabbit either way.
Have a great night
sara
Last edited:
Hi mspuff5
1) Hover your cursor over one of Fidola13 icons
2) A window will open above the Fidola13 icon
3) Select "Start conversation" at the bottom of the window
I've been around here since about 2010
I didn't know that DM = Direct Message(Start conversation)
I learned something today
1) Hover your cursor over one of Fidola13 icons
2) A window will open above the Fidola13 icon
3) Select "Start conversation" at the bottom of the window
I've been around here since about 2010
I didn't know that DM = Direct Message(Start conversation)
I learned something today
- Status
Similar threads
