Brass "T-Tips" available now from Super-T Manufacturing!!!

[forcedfuel50]

801, 901 and 510 "T-Tip" brass mouthpieces are now in stock and ready to ship! Machined from solid core brass and featuring an integrated o-ring for positive seal and tip rentention, T-Tips are great for dripping (with a needle tip type bottle, see below) or for dressing up any brand PV you may own!

Fits most all popular brands of 801, 901 and 510 atomizers. For dripping only. You can even drip right through the top without removing the mouthpiece with a narrow tipped bottle!

For ordering information visit: Super T, Innovative manufacturer of Personal Vaporizer products.

Note: On the 801 tip, i have not verified the fit on the BE112 version, but have on the 201 and DSE 801 style atomizers.

Note: The 510/901 tip looks long, but is actually approximately the same length as a stock 510 tip

At 15.99 a piece, they cost only about twice the price of an atomizer, but will out-live a thousand atomizers!

801 T-Tip

.
510, 901 T-Tip-

http://www.racers-edge.com/1_2_OZ_BOTTLE_W_NEEDLE_TIP_p/rce3000.htm

Dispenser Bottle, 2 oz. with Needle Tip

 

[KonaNeil]

....Note: On the 801 tip, i have not verified the fit on the BE112 version, but have on the 201 and DSE 801 style atomizers....

David,
Do you need a BE112 to check? I could send you one. I'd be surprised if it didn't work. I use 801 soft tips on my BE112 attys and carts and they fit fine.

Since the small hole would help center falling juice drops, can I assume one can drip with the tip on? This would make dripping much easier. If so, this is an innovation.

If this isn't accurate enough, a pin soldered onto the inner lip going down at an angle to the center of the hole could be added to act as a guide.

 

[forcedfuel50]

David,
Do you need a BE112 to check? I could send you one. I'd be surprised if it didn't work. I use 801 soft tips on my BE112 attys and carts and they fit fine.

Since the small hole would help center falling juice drops, can I assume one can drip with the tip on? This would make dripping much easier. If so, this is an innovation.

If this isn't accurate enough, a pin soldered onto the inner lip going down at an angle to the center of the hole could be added to act as a guide.

My mom has been dripping directly in hers without removing it and it is made even easier if you use a drip bottle with a very pointy tip that can go down into the tip hole.

David

 

[Richie G]

I'm glad that David didn't name the company Super Q Manufacturing. Because if he did I would have just overpaid for a couple of Q-tips that wouldn't even fit in my ear.

 

[forcedfuel50]

David,
Do you need a BE112 to check? I could send you one. I'd be surprised if it didn't work. I use 801 soft tips on my BE112 attys and carts and they fit fine.

Since the small hole would help center falling juice drops, can I assume one can drip with the tip on? This would make dripping much easier. If so, this is an innovation.

If this isn't accurate enough, a pin soldered onto the inner lip going down at an angle to the center of the hole could be added to act as a guide.

I'm thinking it will fit too, but didn't want to declare that it did without checking. I'll pm you.

 

[T to the IMMAY]

I just ordered my brass T-tip for a 901 order #1276

Thanks David !!!!

 

[WytNyt]

Just ordered mine. It will look great on my Super-T1. Thnx David!!!

 

[forcedfuel50]

I'm glad that David didn't name the company Super Q Manufacturing. Because if he did I would have just overpaid for a couple of Q-tips that wouldn't even fit in my ear.

Funny stuff! I thought "T-Tips" had a nice ring to it

 

[grimmer255]

Wow i want one

 

[Richie G]

Funny stuff! I thought "T-Tips" had a nice ring to it

It's a catchy name, Sir. I like it.

But, I have to tell ya... when I first read "T-Tip" I thought of "T" as in the shape of the letter 'T'. You know, like a "T" handle allen key. LOL

 

[grimmer255]

LOL T-Tips Gotta love it.......

 

[koolvapor]

Looks great got to try one.

 

[EdGee]

Could you make some in aluminum so i could have a silver ones too? Then again how about copper, black delrin, white delrin. Oh the possibilities!

 

[forcedfuel50]

Could you make some in aluminum so i could have a silver ones too? Then again how about copper, black delrin, white delrin. Oh the possibilities!

I will eventually do up some aluminum ones if anyone is interested

 

[CHUCKLEHEAD]

Just purchased a brass 510 tip order# 1228>>>>>>. hm david i just got a email stating mail delivery failed whats up with that And i definetly would like aluminum

 

[forcedfuel50]

Just purchased a brass 510 tip order# 1228>>>>>>. hm david i just got a email stating mail delivery failed whats up with that And i definetly would like aluminum

That should look sweet on your chuck!

It just sends out two emails, one to me website email which isn't activated, don't worry, i get the orders when they are placed

 

[Zofryer]

I will eventually do up some aluminum ones if anyone is interested

I am interested!

 

[CHUCKLEHEAD]

That should look sweet on your chuck!

It just sends out two emails, one to me website email which isn't activated, don't worry, i get the orders when they are placed

OK cool! i keep looking for that 59.99 deal 8-o i'm like 4th on that list>>>>>>>.

 

[Synthnadz]

I am interested!

I second the motion. Please make 'em!

 

[olderthandirt]

Aye gawd the clamor!

Dave make this. Dave make that 8-o

Let the man make a T2 for me and then he can make yer tips.

Here Dave, been awhile since I passed ya one o' these