Breaking in cartos Atty's

[KENNY V]

Hey guys few Q,s how bouts Break in Carto's n Atto's
do you guys juice them up and start vapping right out of the package
or do you break them and if so how long how much and how do you do it ?

Atto's

Cardo's


changing juices ( atty only )
If you are changing juices while dripping w/ Atty
what are some ways to clean them out between flavors ?
I been using VG and puff out flavor before the switch been workin ok but capachino's a bit dominant when i id like to taste the majic juice

TIA
vape on Man

 

[Iron Molly]

For attys I just try to blow out the oil that's in there when they are new, as best I can. Drip into it, let it sit for about a minute to soak the coil, then it's all good. For changing flavors I just vape through it. You find some interesting flavor combos that way! I change flavors ALL THE TIME which is one reason cartos/clearos/tanks are not for me.

 

[KENNY V]

For attys I just try to blow out the oil that's in there when they are new, as best I can. Drip into it, let it sit for about a minute to soak the coil, then it's all good. For changing flavors I just vape through it. You find some interesting flavor combos that way! I change flavors ALL THE TIME which is one reason cartos/clearos/tanks are not for me.

yea me too , i asked Q about if ya can blow out a carto with an air tip no one answered so blew that one up... all stuffing came out..... after I fiddled with it too long tossed it/..
like that little sucker too was my only 1.7Ohm at the time

well I dont like toasted almond when I want something else ...love it at night but not too fond when im taking my morning medicine .

Now I read or saw somewhere that you can clean out an atty with vodka alcohol or something?? anyone know something tips and tricks with cleaning an Atty without ruining them.

Btw you can clear/ blow the juice out with air on them.. But still would like to clear the taste effectively without puffing on VG

anyone have a trick to lend?


TIA
Vape on M

 

[Iron Molly]

Cleaning attys for me is hit or miss. I try not to mess with them unless they aren't working. Then I'll try cleaning them and if they make it great, if not, in the trash. You could get two attys, one for your amaretto and one for your other flavors? Since they are relatively cheap...

 

[Iffy]

Atties - Initially, I dry burn off the manufacturing residual fluids. To change flavs, I lightly 'flush' with my PG/VG base and 'fake' (no inhaling) vape till near 'dry'.

Cartos - NEVER dry burn 'em dry!

I've found that trying to resurrect cartos is a waste of my time. Look for $ale$ and buy in bulk.

 

[KENNY V]

Yea im with ya man.. but could someone tell me what the vodka cleaning protocol was.. i read something but don't remember how they did it?

on another note

I am finding that my Cartos always seem dry ,another words only like the vape after a top off.
Am I supposed to use the condom method all the time or once you saturate them its OK to top off every day?

Bonus Q is there such thing as a leak proof Atty if so what's the brand ?


Thanks
vape ...vape it up mon..

 

[HyperRealist]

I saw this but haven't tried it.
Flavor Eraser | handcrafted eliquid and ejuice

 

[Worzel]

I use gin. Doesn't have to be Bombay Sapphire, just the cheapest stuff I can find. A small dip bowl (ramekin) or teacup that angles down for depth that doesn't use a ton of booze. Drop your atty in and you wil see the brown stuff just draw out of your atty. Rinse with water, blow out, and let dry. It will get another tank or two for your cartomizer (if you're desperate). Keep a few attys in rotation. Vodka should work too. I tried vinegar. Works okay if I cannot get my hands on booze (too lazy to go to liquor store) but vinegar is not as good.

 

[Unforeseen]

Moved to Assorted PV Topics - Atomizers and Cartridges

 

[KENNY V]

I use gin. Doesn't have to be Bombay Sapphire, just the cheapest stuff I can find. A small dip bowl (ramekin) or teacup that angles down for depth that doesn't use a ton of booze. Drop your atty in and you wil see the brown stuff just draw out of your atty. Rinse with water, blow out, and let dry. It will get another tank or two for your cartomizer (if you're desperate). Keep a few attys in rotation. Vodka should work too. I tried vinegar. Works okay if I cannot get my hands on booze (too lazy to go to liquor store) but vinegar is not as good.

Thanks

just wondering can u vape an acholcol and willl it harm the atty?
because one of my first nights I added a few drops of amaretto and it actualy worked
if so what works to clear atty and get hit at same time...if it vapes and is safe im in....