Built my first RBA! w/ pic

[SurphKid11]

So today i got my silver bullet and an igo l which is my first rba. It really wasnt that hard granted it was an igo l and not some genesis but it felt good to build my first one with ease. I first had a 4/5 but the ohms were a little to high so i went down to a 3/4 at 1.6 ohms. I didnt want to go any lower for my first time just for safety precautions and i prob couldnt go lower since all i had was 32g wire. The only problem was attaching the coil to the posts cuz they r so small. But it only took me 3 trys then i checked the ohms on my multimeter and put it on my SB and i made sure i didnt use a fully charged batt for the first time so i used one that was around 3.8v. I also got a 1.5ohm dct which im gonna try making the hole a lil bigger than ill fill it up and try it out. Im vaping The Standards Frankenvape and i love it, a new ADV for me. Heres a pic.

 

[super_X_drifter]

Awesome bro. RBAs are the way to go

For increased performance, I suggest a micro coil like this on your dripper:

We have a little thread going that will give you more information on micro coils and build details :

http://www.e-cigarette-forum.com/forum/showpost.php?p=8848169

Good luck bro

 

[SurphKid11]

thats what i plan to do once i get some 30g kanthal

 

[super_X_drifter]

27 gauge Kanthal A1 is my new favorite. That coil in the pic is 27 ga and 1.26 ohms.

Here's a link to the Kanthal :

http://www.temcoindustrialpower.com/products/Resistance_Wire/RW0107.html