Bulli A2-T
- Thread starter BigBulli
- Start date
- th_trl_thread_readers 0
- Status
Hey everyone! I just have a question for you....
I got my Bulli A2-t this week, and have been having a few issues. I can not seem to get any good vapor from this unit, and the vapor I do get tends to taste a little... well off. Not like it would from a normal atomizer or cartomizer. I have a good coil.. 2 Ohms, and it is getting juice. I have a pretty good wick, that is wicking properly, but I still seem to have some issues.
When I take the tank out of the unit I get great hit and wonderful flavor, but I put the tank in, and then I start to have the issues.
ANy thoughts? I am using 1 piece of wick wrapped in SS mesh, and have tried using 2 pieces as well. SO far the one piece has been working better.
I am not sure if it is a wicking issue, as the wick and coil both seem to be saturated.
Thanks in advance for the tips!
I got my Bulli A2-t this week, and have been having a few issues. I can not seem to get any good vapor from this unit, and the vapor I do get tends to taste a little... well off. Not like it would from a normal atomizer or cartomizer. I have a good coil.. 2 Ohms, and it is getting juice. I have a pretty good wick, that is wicking properly, but I still seem to have some issues.
When I take the tank out of the unit I get great hit and wonderful flavor, but I put the tank in, and then I start to have the issues.
ANy thoughts? I am using 1 piece of wick wrapped in SS mesh, and have tried using 2 pieces as well. SO far the one piece has been working better.
I am not sure if it is a wicking issue, as the wick and coil both seem to be saturated.
Thanks in advance for the tips!
MS where the small hole is in the mouth piece of the tank take and pry it out. Under that there is another piece with a small hole, pry it out then replace the outer piece and see if that helps.
Sent from my DROIDX using Tapatalk 2
Sent from my DROIDX using Tapatalk 2
Well look at that! SUper easy, and made a huge world of difference! Thank you so much!
I just want to thank everyone who has participated in this thread. I'm definitely going to be getting an Bulli - probably the A2-TM - and I know this thread will let me get the most out of it. I'm looking forward to the best vape I've ever had!
Special thanks to BigBulli for starting it - and for your service to our country. Go Marines!
Special thanks to BigBulli for starting it - and for your service to our country. Go Marines!
Last edited:
Has anyone had succes with setting it up vertically like a genesis coil? I purchased some 400 mesh and am going to give this a shot when it gets in. Saw some directions early in the thread but was wondering if anyone is actually using this way and if it improves flavor and vapor?
I did experiment with using SS Wool as the wick inside the coil. Flavor was much better but vapor was significantly down that it wasnt worth it.
I havent got things 100 percent yet, but have some thinner juices on the way. I am having a blast messing around with it though.
Im also just about out of wick because I have been messing with it so much. Whats the cheapest place in the US to order more wick from?
Also - ordered some different gauge Nichrome wire to see if I like it better or not.
I feel like a mad scientist with this thing...
I did experiment with using SS Wool as the wick inside the coil. Flavor was much better but vapor was significantly down that it wasnt worth it.
I havent got things 100 percent yet, but have some thinner juices on the way. I am having a blast messing around with it though.
Im also just about out of wick because I have been messing with it so much. Whats the cheapest place in the US to order more wick from?
Also - ordered some different gauge Nichrome wire to see if I like it better or not.
I feel like a mad scientist with this thing...
If you are truely looking for cheap and very good wick material check out this thread http://www.e-cigarette-forum.com/forum/modding-forum/284030-wick-materials-safe-vs-dangerous.html I have been using the cotton batton and what a great result in flavor and never a dry hit. check it out
Hey, as it is in Deutch and picture has 404d, could someone explain or even send a pic of what happens in the wick setup link jimbalny posted in http://www.e-cigarette-forum.com/forum/atomizer-mods/197617-bulli-a2-t-45.html
In another thread, Deutch guy who isnt really familiar with rebuildables made a translation that quite doesnt open the thing for me, but ill post it here anyway, if someone knows this style or understands it. Major thanks to Kopfstimmen for this:
After your normal preparation, make it a loop around both sides of the glass (glass fiber?) and pull (the wicks) together as far as possible toward the bottom. The benefits are presumably:
Screwing it together: The wicks don't get caught in the threads.
Capillary action: The wicks don't touch the glass; they soak in the liquid.
After you finish, double check the distance (from the side of the tank?).
In another thread, Deutch guy who isnt really familiar with rebuildables made a translation that quite doesnt open the thing for me, but ill post it here anyway, if someone knows this style or understands it. Major thanks to Kopfstimmen for this:
After your normal preparation, make it a loop around both sides of the glass (glass fiber?) and pull (the wicks) together as far as possible toward the bottom. The benefits are presumably:
Screwing it together: The wicks don't get caught in the threads.
Capillary action: The wicks don't touch the glass; they soak in the liquid.
After you finish, double check the distance (from the side of the tank?).
Last edited:
I didn't have any good flavor out of my bulli until I tried cetin's new method of tying up a loop of wick OVER the coil, this way juice contained in that wick flows down more easily as opposed to flowing up. Ever since I've been doing this, wayyy better flavor/wicking. ALSO, helps to roll up or tie multiple knots to make a ball of wick and put under the coil. This way when u overdrip it doesn't end up leaking out but refeeds the coil. Takes a lot of experimentation and practice, hope this helps
Guess it's this then? Does anybody have the picture saved? Or does a tutorial video exist?
I just received a bulli a2-tm. This thing produces tons of vapor and I may even have to reduce my nic level. BUT, my flavor is really reduced. I have tried about 5 different coils. It is wicking wonderfully, just lacking on the taste.
I am using Boba's Bounty (100% VG) which taste awesome in a carto...
Any suggestions?
Please help!
I am using Boba's Bounty (100% VG) which taste awesome in a carto...
Any suggestions?
Please help!
maybe try a different juice mix like 50/50 to see if there is any difference ? I haven't received my bully yet but looking forward to it
Just to let every1 know Willkommen beim King of Vapor has a special 20 euro discount on bulli atomizers Just got my first one such a good deal
Just got my first one such a good deal 
I just got the Bulli A2-TM from Vaporcigzz for my mother b/c she likes the eGo tank system. Now I only use genesis style attys and I set this up for her and besides the tighter draw then I'm used to like in my geni's this thing rocks! The flavor and vapor production is great!!!! I think I may have to buy another for myself. I want to try AG's setup next time for a SS surrounding silica wick almost like a straight genesis style. With my experience with rebuildable attys I set it up in less than 5 minutes. I was skeptical, but the Bulli is freaking amazing!!!!!!!!!!!!!!
Great job AG!!! I'm trying your geni style setup next time.
Moved to Rebuildable Atomizer Systems from The Modding Forum - Atomizer Mods
im pulling my hair out i cant seem to get juice from the tank to the wick no matter what i try. the hits are too airy and flavour is non existent normaly i read entire threads but 172 pages is a little above my limit lol
- Status
Similar threads
- Locked
- Locked
