By Leo : Attys, mods, Drip-tips, tanks [CLOSED}

[EbenezerScrews]

I'm with Yankee , it just seems off to me that 8 watts is hot. Now granted the Sofia and a rda are totally different experiences but I'm vaping at 95 ish watts as I type this and I just can't see how 8 watts would be too hot. Something is amiss.

95 watts, wowie kazowie! I spent most of my vaping life between 4.5-6 watts using primarily "old school" 901s at 2.9ohms. Now a days I've brought it up around 7-9 watts.

Do you ever vape with less power? Much less power, haha, 7-9 watts? If so, are you satisfied with the vape? I'd be worried, and am cautious, of jacking the power too much and start chasing the dragon, haha. I need to keep the form factor of 18350 batteries and a pair of lil 3ml bottles of liquid for the day.

Not judging in anyway man, genuinely curious

Back to By Leo, haha...

My Sofia has started to get neglected I just can't put down the eBaron. I have no complaints against Sofia whatsoever, she works flawlessly, but after a year long stint of using primarily tanks/cartos/etc., having coming from years of old-school 901/501 "dripping" atties, now that I am dripping again...I loves it, haha.

Does anyone here use the Sofia as a dripper? I am pretty sure I saw a post with a picture of someone using a nude sofia, but that was a while ago. I think I am going to have to try it.

Also, I know there are some Microstick users in this thread. Does anyone drip with theirs? I know the eBaron with a spiral base(which I do not own) would fit, but there are obvious problems with that setup; how to thread it on/off, needing a longer drip tip, aiming drips down into the atomizer shaft, potential cleaning issues in case of flooding, and so on...I just started looking into dripping with my Micro, doesnt seem promising but maybe someone here has some insight. Very helpful & knowledgable folks in this thread

 

[AngiBe]

95 watts, wowie kazowie! I spent most of my vaping life between 4.5-6 watts using primarily "old school" 901s at 2.9ohms. Now a days I've brought it up around 7-9 watts.

Do you ever vape with less power? Much less power, haha, 7-9 watts? If so, are you satisfied with the vape? I'd be worried, and am cautious, of jacking the power too much and start chasing the dragon, haha. I need to keep the form factor of 18350 batteries and a pair of lil 3ml bottles of liquid for the day.

Not judging in anyway man, genuinely curious

Back to By Leo, haha...

My Sofia has started to get neglected I just can't put down the eBaron. I have no complaints against Sofia whatsoever, she works flawlessly, but after a year long stint of using primarily tanks/cartos/etc., having coming from years of old-school 901/501 "dripping" atties, now that I am dripping again...I loves it, haha.

Does anyone here use the Sofia as a dripper? I am pretty sure I saw a post with a picture of someone using a nude sofia, but that was a while ago. I think I am going to have to try it.

Also, I know there are some Microstick users in this thread. Does anyone drip with theirs? I know the eBaron with a spiral base(which I do not own) would fit, but there are obvious problems with that setup; how to thread it on/off, needing a longer drip tip, aiming drips down into the atomizer shaft, potential cleaning issues in case of flooding, and so on...I just started looking into dripping with my Micro, doesnt seem promising but maybe someone here has some insight. Very helpful & knowledgable folks in this thread

Your not alone...my Drippor Pros get all the love. But going to try the Sophia on the REO but still puzzled how it works. Need to search around and see what Techno wrote up about it cuz I think he started a thread somewhere.

And yes..there was several commenting here before about the microstick but can't remember what they said. I know, helpful HUH?

 

[Burnie]

Got this in today, should have gotten 18500 button top batteries instead of 18490 flat top, the tube is a little long. Not even sure if 18650 button top would fit snug, with 18650 flat top I can not adjust it enough to get the battery to not rattle. Plus the bottom switch does not make contact good (could be because the distance I had to extend the adjustment to get the battery to stop rattling, using 18490 flat & kick). Would not get another, but it does look nice.

Dragon Mech Mod With D-Base tank and Sophia & swirl FT drip tip.

Vape On
Burnie

 

[EbenezerScrews]

Your not alone...my Drippor Pros get all the love. But going to try the Sophia on the REO but still puzzled how it works. Need to search around and see what Techno wrote up about it cuz I think he started a thread somewhere.

And yes..there was several commenting here before about the microstick but can't remember what they said. I know, helpful HUH?

The Sophia Rebuildable Atomizer by Leo **Discussion & Tips**

A very good read I think the Sofia can be tricky initially, only because it's seems more so than it actually is, haha. Once you get her workin to your liking, she's easy to maintain. Good luck!

Lovin my Dripper Pro. I'm curious to see if anyone has been able to use their eBaron in a Microstick without much hassle. Unsure if i wanna get the base for it cause id prefer the Pro otherwise. Microstick with an eBaron, ugh, would be fantastic. I know i could get it to work, but doing so without a hassle or looking absurd is a different story, haha.

 

[yankeebobo]

 

[chadsmo]

95 watts, wowie kazowie! I spent most of my vaping life between 4.5-6 watts using primarily "old school" 901s at 2.9ohms. Now a days I've brought it up around 7-9 watts.

Do you ever vape with less power? Much less power, haha, 7-9 watts? If so, are you satisfied with the vape? I'd be worried, and am cautious, of jacking the power too much and start chasing the dragon, haha. I need to keep the form factor of 18350 batteries and a pair of lil 3ml bottles of liquid for the day.

Not judging in anyway man, genuinely curious

I started like most everyone else. Low wattages and ego batteries etc. Then I was on a year long Provari / Dripper PRO kick, as well as my Killer 705 and my Sofia. All fantastic attys. Sadly I really don't use any of them anymore. My GP Heron and Spheroid and Microstick also sit around collecting dust these days. And yeah , it all happened after RDAs and getting in to high wattages with big airflow and low ohms. I don't build vape anything over .45 ohms anymore, it's just not as satisfying. My regular rotation is my TOBH at .18 my Quasar at .35 and my Raiju at .45 It's good and bad. I love the vape that 45-100 watts on a mech gives you , but it's a little upsetting to not find enjoyment in all of the great stuff I used to use. Also, I go through 15-20 ml of juice a day , so that kind of sucks too lol.

When Bill brings out his new dripper I'll probably grab one but I can't go back to anything other than RDAs at high wattages anymore.

 

[EbenezerScrews]

I started like most everyone else. Low wattages and ego batteries etc. Then I was on a year long Provari / Dripper PRO kick, as well as my Killer 705 and my Sofia. All fantastic attys. Sadly I really don't use any of them anymore. My GP Heron and Spheroid and Microstick also sit around collecting dust these days. And yeah , it all happened after RDAs and getting in to high wattages with big airflow and low ohms. I don't build vape anything over .45 ohms anymore, it's just not as satisfying. My regular rotation is my TOBH at .18 my Quasar at .35 and my Raiju at .45 It's good and bad. I love the vape that 45-100 watts on a mech gives you , but it's a little upsetting to not find enjoyment in all of the great stuff I used to use. Also, I go through 15-20 ml of juice a day , so that kind of sucks too lol.

When Bill brings out his new dripper I'll probably grab one but I can't go back to anything other than RDAs at high wattages anymore.

Damn. Well ya found something ya like. I know myself, and would do the same thing if I started raising the bar. More more more! Haha.

I may have benefited from not having the options when I started vaping, was able to settle, i dont know. If I was to start vaping today, I could totally see myself pushing the power limits, haha.

Thanks man.

 

[chadsmo]

My next mod that I'm waiting to ship is a regulated box mod that will fire a .375 coil at 83 watts , I'm super excited for it lol.

 

[RandomFellow]

 

[AngiBe]

The Sophia Rebuildable Atomizer by Leo **Discussion & Tips**

A very good read I think the Sofia can be tricky initially, only because it's seems more so than it actually is, haha. Once you get her workin to your liking, she's easy to maintain. Good luck!

Lovin my Dripper Pro. I'm curious to see if anyone has been able to use their eBaron in a Microstick without much hassle. Unsure if i wanna get the base for it cause id prefer the Pro otherwise. Microstick with an eBaron, ugh, would be fantastic. I know i could get it to work, but doing so without a hassle or looking absurd is a different story, haha.

Thanks for the link! I read it a few times before I got my REO and couldn't find it again

 

[Billie-cig]

Our winner for this month's drawing is : EbenezerScrews !
Congratulations!
Please, PM me your address info

 

[Burnie]

Congratz EbenezerScrews

Thanks for the Drawing Billie.

Vape On
Burnie

 

[AngiBe]

Our winner for this month's drawing is : EbenezerScrews !
Congratulations!
Please, PM me your address info

WOOHOO!!! congrats to you!

 

[Krisma]

Our winner for this month's drawing is : EbenezerScrews !
Congratulations!
Please, PM me your address info

Congratulations

Thanks Billie, what a great giveaway.

 

[yankeebobo]

Congrats Ebenezer!

 

[newyork13]

OK. I built my coil, trimmed one leg shorter than the other, positioned the cup with the cut-outs in the Sophia. Didn't look for the holes in the cup. Just blindly allowed the two wires to go their own way, and they went their own way into the holes in the cups. Next time I'll do it blindfolded. Unfortunately, the KGD wick didn't work as well as last time. Dry hits. Did it again, same thing. I suspect that although it runs through the coil without friction, it was too dense. The next try was better, but not perfect.

That is funny! But...I'll bet it'll work for you again.

P.S. Let us know.

 

[newyork13]

Congrats Eben! You'll enjoy the tank, and tanks [haha, pun intended] to byLeo for another lottery.

 

[Zbeast08]

My next mod that I'm waiting to ship is a regulated box mod that will fire a .375 coil at 83 watts , I'm super excited for it lol.

That is unreal wattage. I just don't get how you guys run those high wattages, I may be missing something! If I run anything above 10-12 watts, things start tasting "burnt".....but I'm only building 1.2-1.8 ohm coils....just haven't figured it out yet!! Vape on!


Sent from my iPad using Tapatalk

 

[Zbeast08]

Congrats to ebenezer......thanks for the chance Billie!


Sent from my iPad using Tapatalk

 

[qorax]

Our winner for this month's drawing is : EbenezerScrews !
Congratulations!
Please, PM me your address info

Congrats ES