By Leo : Attys, mods, Drip-tips, tanks [CLOSED}

[qorax]

Did I miss when the Calix V2 would be going up, or has that not been announced?

I love the v1, and after watching Qs video, and of course before when I found out the AF was moved from the 510 to the side, I don't know how I'm gonna hold back from snagging a V2

Sent from my iPhone using Tapatalk

It's in stock here brother: Calix V2 Elegance - By Leo

 

[dems86]

It's out. you can check the details here: https://www.e-cigarette-forum.com/forum/threads/calix-v2.719988/page-5]

I didn't see it on the site when I checked on mobile, I must be a total dumb dumb


Sent from my iPhone using Tapatalk

 

[Zbeast08]

I am a little late but Happy New Year to all and I hope everyone will have a healthy prosperous 2016!! Peace Out!



Sent from my iPad using Tapatalk

 

[newyork13]

Hi All,
Happy New Year, belatedly.

I need another tank to hold a Sophia. Of course, the question is another dBase or another Cage, both of which are working fine for me. My only other experience with a top fill tank like the Cage V2 was not great: it tended to leak. Perhaps how top filling affected the vacuum, I'm not sure.

Any thoughts or recommendations from you folks, including Billie of course?

 

[qorax]

Hi All,
Happy New Year, belatedly.

I need another tank to hold a Sophia. Of course, the question is another dBase or another Cage, both of which are working fine for me. My only other experience with a top fill tank like the Cage V2 was not great: it tended to leak. Perhaps how top filling affected the vacuum, I'm not sure.

Any thoughts or recommendations from you folks, including Billie of course?

Sophia has a juice control. If you ensure that it is closed while filling - then top fill or bottom fill or any type of fill for that matter doesn't effect anything. It shouldn't leak.

 

[Billie-cig]

Hi All,
Happy New Year, belatedly.

I need another tank to hold a Sophia. Of course, the question is another dBase or another Cage, both of which are working fine for me. My only other experience with a top fill tank like the Cage V2 was not great: it tended to leak. Perhaps how top filling affected the vacuum, I'm not sure.

Any thoughts or recommendations from you folks, including Billie of course?

Tanks with top filling ports in general have a complex fitting ( a lot of parts) so if not closed properly they might leak, because they get air from the filling ports even when closed (o rings etc). The simpler the tank, the less chances there are for it to leak

 

[Billie-cig]

The giveaway is up!
By Leo monthly give-away

 

[newyork13]

Tanks with top filling ports in general have a complex fitting ( a lot of parts) so if not closed properly they might leak, because they get air from the filling ports even when closed (o rings etc). The simpler the tank, the less chances there are for it to leak

thanks Billie. that's what I was thinking.
so, although I like the ease of filling from the top, I'm thinking that I like the lack of problems from the dBase and old style Cage. (Not to say that your top filling Cage has issues, never having had one, but my other top filling tank did, and my dBase and Cage have been flawless.)
Regarding the dBase, are the only differences between the old one and the new the glass tank and airslots?

 

[Billie-cig]

thanks Billie. that's what I was thinking.
so, although I like the ease of filling from the top, I'm thinking that I like the lack of problems from the dBase and old style Cage. (Not to say that your top filling Cage has issues, never having had one, but my other top filling tank did, and my dBase and Cage have been flawless.)
Regarding the dBase, are the only differences between the old one and the new the glass tank and airslots?

Exactly

 

[nebulis]

@billie, the ceramic cups and the blue insulators for Sophia V1 are out of stock. When are they going to be available again? Maybe just a question of shop update?

 

[Billie-cig]

@billie, the ceramic cups and the blue insulators for Sophia V1 are out of stock. When are they going to be available again? Maybe just a question of shop update?

Yes. For some reason the low stock alert isn't working
Just restocked them

 

[Billie-cig]

Here is a pic of how the components of each of our products come out from the CnC. Surgical steel (SS 304L) is very tough and has huge elasticity so the machine has to stop after EVERY piece.But we are not going to change the material for our convenience, since there is no other metal that is safe for our health.
(The pic is of a finished P3 base for the Calix)

 

[nebulis]

Beautiful pic!

Yes. For some reason the low stock alert isn't working
Just restocked them

Thank you Billie. Order went out and you were (as always) quick like lightning with processing it.
There are also some other bits and pieces signaling "out of stock", this is just to inform you.

 

[TheotherSteveS]

Here is a pic of how the components of each of our products come out from the CnC. Surgical steel (SS 304L) is very tough and has huge elasticity so the machine has to stop after EVERY piece.But we are not going to change the material for our convenience, since there is no other metal that is safe for our health.
(The pic is of a finished P3 base for the Calix)

That is just beautiful!

 

[newyork13]

Here is a pic of how the components of each of our products come out from the CnC. Surgical steel (SS 304L) is very tough and has huge elasticity so the machine has to stop after EVERY piece.But we are not going to change the material for our convenience, since there is no other metal that is safe for our health.
(The pic is of a finished P3 base for the Calix)

That's really nice. If you ever have time, which I doubt considering how hard you folks work, it would be fascinating to see a short video showing the process. We've all heard about CNC, and have enjoyed the benefits, but I at least have never actually seen the process.

 

[nuvole]

The ratio of my Sofia v1 + v2 to tank is like 10:1.
Still await some news for cage v2....

 

[Billie-cig]

That's really nice. If you ever have time, which I doubt considering how hard you folks work, it would be fascinating to see a short video showing the process. We've all heard about CNC, and have enjoyed the benefits, but I at least have never actually seen the process.

Sure, I'll see what I can do about that.

 

[Billie-cig]

The ratio of my Sofia v1 + v2 to tank is like 10:1.
Still await some news for cage v2....

We must first finish with the Calix and the mountain of extras.
We need a LOT of things to restock

 

[HBcorpse]

We must first finish with the Calix and the mountain of extras.
We need a LOT of things to restock

That's a good problem to have!

It means business is booming!
And that makes me happy! I can't imagine if your company stalled out and went away… The thought is just too terrible!

 

[Gabiano87]

Hey Billie. As expected my Gf now wants a sophia V2 after she tried my giveaway prize. We already have all the tops for the Sophia with drip tips and all in ones. Do you sell the Sophia V2 base only?