Can anybody help me ID this?

[Cobra313]

It's a rebuildable atomizer dual coil. a friend of mine gave it to me. because I'm currently using and eLeaf tank and it leaks a little bit and he's a vaper too and he came over this morning and gave me this tank and some cotton and said have fun. I put cotton in it, did what you were supposed to do. you know, filled the tank and been using it.

I just don't know what it is here's a picture of it.

It works great good flavor good smoke all that stuff I just want to know who makes it.



Sent from my SM-G920T1 using Tapatalk

 

[Cobra313]

Here's another picture of it, not sitting on its side. Hopefully this works.

Sent from my Galaxy S6. on taptotalk

 

[coolerat]

iStick 20 or 30.

Orchid V3/4

Sillatare drip tip/

 

[Cobra313]

FWIW, according to the mod, which is a eLeaf 30 Watt, the coils are at 0.4 ohms and the lowest she'll go is 10.0 watts or 2.0 volts. It's good awesome flavor and it packs a wallop on the throat. I can just barely puff on it. I mean, it's not a dry hit or anything. But it is strong.

 

[Cobra313]

iStick 20 or 30.

Orchid V3/4

Sillatare drip tip/

Thanks for the info. The iStick was already mine. He gave me, yes, gave me the top part. Already had coils, just had to put in the cotton; which he gave me some of that too. He's a cool guy. Much younger than me, in his 20's. Nice kid.

It's a bit of a pain in the .... to wick, you gotta really be on the ball. He also gave me some bad info. Said to fill it from the screw in the bottom, Wrong! I guess that's to prime it? Maybe? You fill it from the top. Otherwise, it'll leak out the airholes.

Either way, I got it to working. I did good job on the wicking. Didn't throw it across the room, so I guess I did okay. I'm a shaky, nervous type. So, it was a feat for me.

 

[VHRB2014]

I love my Orchids. They are not for the faint of heart, but once you get those tails right, There Simplicity is Superb. And they are like the chameleon of RTA`s, lots of stuff you can buy to dress them out any way you want. You can even get a top filling tank head for them through ebay of FT. Or a bell tank (the one that fits kayfuns fit the Orchid too).

 

[Cobra313]

My question is, how long will it before I have to rebuild it and make new coils? I am a regular puffer so... Anyone?

 

[coolerat]

Sounds like prolly 26ga wire.

Cotton will need to be changed every week or so.

Coils could last a year or more.

 

[Cobra313]

I love my Orchids. They are not for the faint of heart, but once you get those tails right, There Simplicity is Superb. And they are like the chameleon of RTA`s, lots of stuff you can buy to dress them out any way you want. You can even get a top filling tank head for them through ebay of FT. Or a bell tank (the one that fits kayfuns fit the Orchid too).

View attachment 511899

Mine is a top filler. I was told to full through the screw in the bottom and that didn't work too well. So, I went through the top. It worked! So, I ain't a complaining.

 

[Cobra313]

Sounds like prolly 26ga wire.

Cotton will need to be changed every week or so.

Coils could last a year or more.

Okay, here's the 100 dollar question. What if my juice ain't depleted before the cotton goes bad?

 

[Cobra313]

I also noticed that this top unit doesn't go through the liquid as much as that eLeaf did. That's very cool. I was refilling twice a day on my old one.

 

[Cobra313]

I still might get me a Kangertech subtank plus though. This is nice. But, I'd like that too... Jebus, 3 tanks?!?! I went from a crappy mod to a good mod with a crappy tank, to now a good mod and a good tank and unit to three. Wow... and I didn't spend a dime, yet.

Except on the eleaf mod. I did buy that myself.

 

[Hans Wermhat]

The screw in the bottom is the right spot to fill it. Orchids have a flaw in that the chimney overlaps the fill hole a lil bit. If you look into the hole with the screw out, you will see it. You have to put the juice to the outside of the chimney. Taking off the top cap to fill it can cause it to flood out. When you screw the top back on, it creates pressure inside the tank and forces the fluid out the air holes. There's a way to do it, but it's tricky. Don't ever take the bottom off with juice inside it. It will pour straight out the drip tip if you do.

 

[Cobra313]

The screw in the bottom is the right spot to fill it. Orchids have a flaw in that the chimney overlaps the fill hole a lil bit. If you look into the hole with the screw out, you will see it. You have to put the juice to the outside of the chimney. Taking off the top cap to fill it can cause it to flood out. When you screw the top back on, it creates pressure inside the tank and forces the fluid out the air holes. There's a way to do it, but it's tricky. Don't ever take the bottom off with juice inside it. It will pour straight out the drip tip if you do.

Right. I guess I did it right. Because it did quit leaking out. Guess I got lucky.

 

[Cobra313]

@Hans Wermhat I might have put too much in too. Either way, it's working good now.

 

[Hans Wermhat]

They are pretty decent 1st gen dual coil tanks. I still use mine, but I have the V3. Only holds 2 ml of juice and I can blow through it in like 30 mins. lol! I get tired of refilling it 10 times a day, so it sits there in my box looking lonely a lot.

 

[Cobra313]

They are pretty decent 1st gen dual coil tanks. I still use mine, but I have the V3. Only holds 2 ml of juice and I can blow through it in like 30 mins. lol! I get tired of refilling it 10 times a day, so it sits there in my box looking lonely a lot.

You must run yours up pretty high wattage. I have my at 10 watts, only way I can stand to run it. Otherwise, I'm hacking my head off!

 

[Hans Wermhat]

About 25 - 30w with a .8 ohm build.

 

[Cobra313]

About 25 - 30w with a .8 ohm build.

Whew... I'm at 0.04 ohms and I can't go past 10 watts on this 30 watts eLeaf, I'd be coughing my head off. It's not dry hits, just too much.

 

[Hans Wermhat]

? .04???