Can you tell me the amp limit/other info of these batteries please?

[JmanEspresso]

Picked these up a while back, just as I was starting to get into mechs, and never really was able to find out any information on their capabilities, so I never really used them. Now I see them sitting in my battery drawer, and if they're decent, Id like to use them.

The pictures should show it, but if not, heres the label info:

EH IMR 18650 2250mah. It DOES say high drain 3.7v.




anyway, any help you could lend would be great

 

[Saltraker]

Maybe this will help....EH IMR 18650 2250MAH High drain 3.7V battery with button top(panasonic made)

 

[CloudZ]

^^^ Checked a few other sources and it seems like 10 amps is correct. So make sure your resistance is 0.6 ohms or higher and they will be safe and long-lived. Also, if you've been storing them for a while, check the voltage before you charge them. If it has dropped below 2.5V, they may be permanently damaged and you probably shouldn't use them.

 

[Ryedan]

Ya, this is the Panasonic CGR18650CH, 10A, rebranded by EH. Good battery.

 

[CloudZ]

Ya, this is the Panasonic CGR18650CH, 10A, rebranded by EH. Good battery.

I had a hunch this was the case.

 

[JmanEspresso]

Oh sweet, 10amps aint bad. I should be able to get some use out of these.

Much appreciated guys!

 

[ImThatGuy]

Just don't go lower than a 0.5 build when firing on that mech with those batteries...