Cant seem to read the coils

[Click2412]

Try removing the battery and putting it back in after a few seconds ... the "New coil +(yes)/-(no)" screen should come out.

Done and Done. Made Frusty scratches but nope. A failed again.

 

[edyle]

Hi. nebiew here. Just got confuse about the new Kbox 120W. It seems that it cannot read the coils on the Zephyrus V2 rba and i made sure everything is in place. Coil not touching each other etc. Also, the Kbox can read the given OCC of the zephy V2.

My question is how to fix this?

Edit: I've tested it on my friend's mod but to him it works just fine.

If it works fine one your friend's mod, then that proves the problem is with the kbox.
The kbox centerpin is too low.

 

[Click2412]

If it works fine one your friend's mod, then that proves the problem is with the kbox.
The kbox centerpin is too low.

Yeap. I guess so.

 

[Click2412]

If it works fine one your friend's mod, then that proves the problem is with the kbox.
The kbox centerpin is too low.

BUT. It works on the OCC.

 

[daviedog]

Try another atty or coil.
The 9.9ohm error message means an open coil.
No atomizer means short pin no connection
Low resistance means your build is too low..

 

[Click2412]

Try another atty or coil.
The 9.9ohm error message means an open coil.
No atomizer means short pin no connection
Low resistance means your build is too low..

TLDR; Understood. But nope. Problem is the Kbox. Works on my RDA. Doesn't work on this specific tank's RBA; works on the OCC not the RBA. The RBA works on other Mods.

 

[daviedog]

Do other atomizers work on the kbox? If not, than it does point at the device.

I still feel you should build a new coil to be sure..

 

[edyle]

if it's a spring loaded centerpin mod,
take the battery out to make sure there is no power,
use a small screwdriver or other tool the work the centerpin up and down to get any kinks out.

If that doesn't solve the problem, it means the mod is going to only work with toppers that have a long centerpin sticking out but not with others with a short centerpin.