carto tank ? the best ?

[ryan63052]

So I've been vaping for over a month now , I'm on a kanger T3/evod , which I like both , and I'm using the 1300mah spinner . I'm wanting a carto tank really bad, especially for my tobacco flavors , I want a reliable one that is rebuildable ,,,any input or help would be greatly appreciated,,also would like a really good cartomizer for dripping ,which I do now on a boge 2.0 ,,, thanks for reading ,,, easy on me I'm a noob lol

 

[Thompson]

Carto-tanks aren't rebuildable, we're you thinking of rba? Cartos aren't really the best for dripping either as they tend to hold previous flavors & will contaminate testing.

There are quite a few tank options around but the most affordable glass solution seems to be IBTanked.

I'm using an AGR locking tank & after adding an extra o-ring to stop the dreaded flooding it works great. Most carto-tanks can be pulled right off the carto if not careful. Seeing as careful isn't exactly on my side I wanted one that wouldn't do this. Most people don't have issues with it though.

Faxed in on the Mojo Wire

 

[FACE MEAT]

I'm wanting a carto tank really bad...I want a reliable one that is rebuildable

No such thing. I think you may be referring to a clearomizer, not a cartomizer tank.

EDIT: Hunter S. beat me to it.

 

[bnrkwest]

As mentioned carto tanks aren't rebuildable, you always have to use a carto. BUT for the best carto tank I prefer glass, first choice or 2nd choice polypro. bnrk

 

[ryan63052]

I'm guessing that's what they are called ,its a tank with a carto in the center that has holes in it ,,, I hit this guys that I seen at a BM store and it was incredible and didn't think to ask what it was,,, so thats what I'm looking for , the lingo is still hard to remember for me and the names of this stuff lol ,, and then a really good drip setup

 

[bnrkwest]

yep that's a carto tank They are for me the most reliable. bnrk

I'm guessing that's what they are called ,its a tank with a carto in the center that has holes in it ,,, I hit this guys that I seen at a BM store and it was incredible and didn't think to ask what it was,,, so thats what I'm looking for , the lingo is still hard to remember for me and the names of this stuff lol ,, and then a really good drip setup

 

[MattMann228]

i am still new to all this stuff to and ask the same question when i first started. but now i am using a smoktech carto tank with flanged cartomizers. they are really cheap and easy to use. i want to eventually get a good glass tank but they are a little pricey for me at the moment. as far as dripping goes just find a good atomizer. as of something easy and rebuildable, try an rba vivi nova. i havent tried any rba yet still learning all sorts of stuff though. hope you find something that works for you.

 

[qorax]

I use only carto-tanks... the Boge F-16. And am deeply satisfied.



For a Spinner I believe the F-15 / F-17 would suit the best (looks wise).

 

[bnrkwest]

Pyrex Tanks He has some very reasonable glass pyrex tanks. I have not used his pyrex but do have several of his polypro tanks. My pyrex tanks I got form High Desert Vapes but they are a bit pricey, but all hand blown and works of art bnrk

 

[qorax]

@ $20, VVV's Triple V Pyrex 4ml Premium Tank is nice & affordable. Baditude swears by it.

 

[DaxFX]

I ordered a ego twist with, K EVOD and a mini NOVA with metal tube, they are going ti be my first 2 cleoromizer or tank. I hope to enjoy them. Thay are on the way "out for delivery" today so I can wait to get them with my new joye twist and take those crappy blu into the trash.


Sent from my iPhone using Tapatalk

 

[MattMann228]

hope you enjoy your new twist. i know how excited i was when i first got mine. it is a whole new world with variable voltage. i just recently got my first mod and now my twist is my back up, take to work with me, battery. lol.

 

[Cifitzu]

Syringe mod tank= free for me. I suggest making your own. I also recomend the killer if you like cartos and want to venture into rebuildables. It's actually a little harder to build them most rebuildables if u rebuild it from scratch but nothing is more satisfying then making your own stuff for pennies.

 

[SupplyDaddy]

How about a rebuildable Vivi tank? 4ml, liquid on the bottom, coil and wick from the top. You can redo the coils/wicks on your own, or get them premade. No leak issues for me, do just about any ohm setup you want to and simple.

here is an example.. (note: I get mine for about half that cost...)
Smoktech Vivi Rebuildable Tank - 4ml - MyFreedomSmokes.com

 

[Baditude]

@ $20, VVV's Triple V Pyrex 4ml Premium Tank is nice & affordable. Baditude swears by it.

Actually,although I do have three of the pyrex Triple V tanks from VVV, my preference lately are the slimmer IBTanks. I have seven of these currently because their form factor best suits my two Provari's and gripper-style box mods which I am using more than my larger-size Silver Bullet.

19mm diameter XL IBTanked on a Provari Mini.

7ml pyrex tank from Valley View Vapes on a Silver Bullet.

___

The pyrex tanks from Valley View are a fine economical value, too. But they are only offered in one diameter size (25mm or 1 inch) and a better fit for larger battery devices. IBTanks are available in 19, 22, and 25 mm diameters, and two lengths to fit either a standard length Boge or XL for Smoktech or Boge XL cartos.

How to match carto length vs tank length and carto brand.

___

I have written some articles on the more common juice delivery devices, which explains cartomizers and cartotanks here:

http://www.e-cigarette-forum.com/forum/blogs/baditude/3230-1-proper-terminology-carto-tank-what-primer-juice-delivery-attachments.html


A cartotank setup tutorial: http://www.e-cigarette-forum.com/forum/blogs/baditude/3710-5-cartomizer-tank-setup.html


List of vendors selling pre-punched cartomizers: http://www.e-cigarette-forum.com/forum/blogs/baditude/3295-2-sample-list-vendors-selling-pre-punched-single-coil-cartomizers-cartotanks.html


Review of the IBTanked pyrex tanks: http://www.e-cigarette-forum.com/forum/blogs/baditude/3318-3-ibtanked-pyrex-glass-tanks-review.html


Beware! Some juices can crack the tubes of some tanks. Learn more here: http://www.e-cigarette-forum.com/forum/blogs/baditude/3733-6-something-safe-cinnamon-citrus-flavors.html

 

[stauglocal]

If you want to get fancy, check out the "trap tank" by Kir Fanis

 

[tchisholm]

I prefer a nova over carto tanks

 

[stauglocal]

Although I have three of the pyrex Triple V tanks from VVV, my preference lately are the slimmer IBTanks. I have seven of these currently because their form factor best suits my two Provari's and gripper-style box mods.

View attachment 204384 19mm diameter XL IBTanked on a Provari Mini.

View attachment 204388 7ml pyrex tank from Valley View Vapes on a Silver Bullet.

___

The pyrex tanks from Valley View are a fine economical value, too. But they are only offered in one diameter size (25mm or 1 inch) and a better fit for larger battery devices. IBTanks are available in 19, 22, and 25 mm diameters, and two lengths to fit either a standard length Boge or XL for Smoktech or Boge XL cartos.

View attachment 204387 How to match carto length vs tank length and carto brand.

___

I have written some articles on the more common juice delivery devices, which explains cartomizers and cartotanks here:

http://www.e-cigarette-forum.com/forum/blogs/baditude/3230-1-proper-terminology-carto-tank-what-primer-juice-delivery-attachments.html


A cartotank setup tutorial: http://www.e-cigarette-forum.com/forum/blogs/baditude/3710-5-cartomizer-tank-setup.html


List of vendors selling pre-punched cartomizers: http://www.e-cigarette-forum.com/forum/blogs/baditude/3295-2-sample-list-vendors-selling-pre-punched-single-coil-cartomizers-cartotanks.html


Review of the IBTanked pyrex tanks: http://www.e-cigarette-forum.com/forum/blogs/baditude/3318-3-ibtanked-pyrex-glass-tanks-review.html


Beware! Some juices can crack the tubes of some tanks. Learn more here: http://www.e-cigarette-forum.com/forum/blogs/baditude/3733-6-something-safe-cinnamon-citrus-flavors.html

You gotta love those Valley View Vapes tanks. I always keep two in my rotation.

 

[ryan63052]

That f-16 and f-17 is what I'm wanting ,,, so is there a good cartomizer for those you need to buy that are prepunched ? I'm kinda confused on what to get for dripping

 

[GRH8095]

This is another carto tank, to keep an eye out for ...
- Smoktech Pyrex DCT